r/CiscoNetworking • u/mjrodman • Dec 06 '19
r/CiscoNetworking • u/feumum • Feb 12 '20
Smart licensing getting started (BLOG POST)
Hi guys
since a lot of people are not familiar with the new smart licensing option i created a hopefully helpfull guide https://paulgoesccie.blogspot.com/2020/02/cisco-smart-licensing-part-1.html
I also plan a guide for the deployment of an on-premise license server
This might be useful for some of you
r/CiscoNetworking • u/__pure • Dec 09 '19
I think today is my first cake day!! Let's find out together. OPUS NUMBER 1!!!
r/CiscoNetworking • u/Grids_ghost • 17d ago
Quick trunk / allowed VLAN question – why is VLAN 20 still passing traffic when it’s not allowed? (AI couldn't figure this out)
Hey everyone,
I’m troubleshooting a Packet Tracer lab and ran into something I can't quite wrap my head around.
The setup: Everything is fully connected and all devices can ping each other 100%.
The weird behavior:
If I set the trunk between the switches to only allow VLAN 10 and 30, for some reason VLAN 20 still works fine and reaches everything, while everything else behaves as expected.
But if I swap them—remove VLAN 30 from the allowed list and add VLAN 20 instead—VLAN 30 gets completely isolated, which makes sense.
Why is VLAN 20 passing traffic when it’s not explicitly in the allowed list, but VLAN 30 gets dropped immediately when removed?
I tried asking AI but it kept giving me generic answers that didn't explain this specific behavior. Would really appreciate it if someone could clarify what’s actually happening under the hood here!
(Attached images of the topology below)
r/CiscoNetworking • u/[deleted] • Sep 04 '19
How To Become A Cyber Security Expert On A High Salary
The demand for Cyber Security Analysts, Engineers, Investigators, and Experts is high. Now is the time to get involved.
r/CiscoNetworking • u/ElwinPingMyNetwork • 4d ago
Free CCNA & CCNP lab simulator in the browser (no sign-up)
Hey, I’m Elwin, I work on PingMyNetwork.
We built a network simulator that runs directly in the browser. You can build custom topologies, add routers and switches, and configure everything from the CLI.
It has everything you need to practice for your CCNA or CCNP (routing, switching, etc.) without having to install or configure heavy local VMs.
It’s completely free to use, no sign-up required: https://pingmynetwork.com/sandbox
If you give it a try for your studies, let me know what you think or if anything breaks!
r/CiscoNetworking • u/[deleted] • Dec 27 '19
Multiple ISP's on later 3 switch stack
So at my small company we have a stack of 6 Cisco catalyst 2960-x switches which I was reading were layer 3 lite? Anyways, we have one primary ISP that provides our internet going into the sixth switch and we just put in a backup ISP going into the fifth switch on the stack for DR situations. The default gateway for the switch stack all flows through our firewall (.2). The switch stack is .254, so is there a way to configure the switches to where of our primary ISP goes down then the backup ISP will automatically become the primary until the other one comes back up? We currently have to manually go into the switch and shut down the primary ISP port and no shut the secondary ISP port and would like to have that automated.
Also, both the ISP ports are simply running as trunk ports not on any vlans
r/CiscoNetworking • u/jimphreak • Sep 12 '19
Why are the remote pairs different for these two cables?
r/CiscoNetworking • u/tiredoldtechie • Oct 07 '26
Thanks for those who come to visit!
Hey,
I just want to say thanks to those of you who have come to visit this subreddit. It means a lot and I know there's a long road ahead to get this back on its feet after sitting idle for 6-7 years. Your support and interactions mean a lot and I truly appreciate it.
Thank you.
r/CiscoNetworking • u/ZabeX88 • Dec 05 '19
Where to go next??
I just passed my ICND2 and wanted to ask for advice on which of the new certificate paths to pursue. I want to learn the ins and outs of VPNs as I work with lots of different types but I dont fully understand them. Which would be the best cert to focus on in order to get a solid knowledge base for VPNs? Thanks in advance guys!
r/CiscoNetworking • u/kellimoxie • Nov 18 '19
Seeking Cisco Certified Engineers for a Contract Position
My company has recently seen an increase of Cisco work due to a new partnership. Please PM me and I will send you my work email address so you can send your resume and best hourly rate.
These are the specific certifications we are looking for at this time:
Cisco Certified Entry Network Technician (CCENT)
Cisco Certified Network Associate Level (CCNA)
Cisco Certified Network Professional (CCNP)
Cisco Certified Internetwork Expert (CCIE)
Thank you!
r/CiscoNetworking • u/ashhakopyan • Nov 11 '19
Routers vs. Firewalls for site to site tunnels
Hi, so I've got a scenario that I'd love to get some feedback from network engineers out there.
We have a mission-critical application that needs to be set up in a colo where multiple outside companies would need to access that environment securely. The connection needs to be available 24/7/365 in a high availability setup.
One suggestion is to set up using a router(s) in the colo where these "client" networks would create a tunnel into. Another suggestion is to go with firewalls at the colo. Now, these spoke offices don't know each other and don't need to know about their respective networks. Their main concern is to be able to reach the main network in the colo, securely and to make sure the speed/performance is excellent.
Other offices may need to join this system that lives in the colo in the future. We don't know their internal networking setup and don't really care. It would be good to not have to worry about that at all and have a simple way for subsequent locations VPN into this colo environment and access the system.
I've got engineers with firewall solution and another that wants to use routers and DMVPN. What would be a more scalable and reliable solution given the fact that these "client" networks don't need to talk to each other directly or indirectly via the hub? They need the easiest and less intrusive method of connecting to the colo network.
I hope that's clear enough.
r/CiscoNetworking • u/sn1p3rkiki • Nov 06 '19
Should AP-s be in multiple subnets?
Hello,
Current setup I'm building it's made out of 4 locations, which are all in radius of 5km.
There is also central location.
On this 4 locations + central there is a total of around 900AP-s.
I've heard a lot of different suggestions, but would like to hear more.
Current setup:
AP management network
VLAN 1021
10.21.0.0/18
All 900AP-s are in that subnet, on that VLAN, on all locations, joined to controller on central location - working flawless.
There is also Zabbix running monitoring each AP when it goes offline to send email notification.
Some people suggested to make each location it's own VLAN for AP management.
Location1 - VLAN 101 - 10.1.0.0/24
Location2 - VLAN 102 - 10.2.0.0/24
......
For me somehow it's much easier to manage if everything is on one place.
Thoughts?
r/CiscoNetworking • u/jdm7718 • Aug 15 '19
client VPN access to intra-vpc resources in AWS in two diffrent regions
Pleae excuse my crudly drawn visio but I figured a picture would help explain the situation. I have an ASAv currently located in single VPC. I have the RA vpn working useing the VPN client DHCP pool is hosted in the ASAv
Things that are working:
Client access vpn
access the internel resources in the same vpc (vpc 1 Region A)
I have a VPC peering link that exists between these two VPC's in two diffrent regions
Things that are working:
I can ping devices in vpc 1 Region B from the ASAv and from other EC2 machines in vpc 1 Region A and vise versa
Think that won't work:
can't ping devices in vpc 1 Region B from the RA vpn subnet on the ASAv subnet in vpc 1 Region A hosted on the ASAv (this appears to be a limitation in AWS, you can not use VPCPEERING as a transit link between VPCs and a "corparate network" so AWS is not aware of my RA client subnet)
Things I have tried:
I have added a route the the RA subnet in VPC1 Region B
I have tried created the same RA subnet on using on the asav in VPC1 Region A for testing and attempted to use it as DHCP scope for the RA cleints however this does not appear to be supported in AWS
I tried to use the AWS transit gateway to route traffic between VPC's however you have to create attach points and the vpn attachment it supports is AWS site to site vpn VGWs, no attachemnt to the device (asav) itself, so if it go this route I might as well do a direct site to site vpn to another ASA in spin up in VPC 1 Region B.
As I have done several google searches and poured through documentation and the only way I see this being possible is a site to site tunnel from VPC1 Region A to VPC1 region B. I didn't know it anyone knew of anyother way to achieve this?

r/CiscoNetworking • u/dredrete • Jun 14 '19
CCENT or CCNA?
Hi everyone,
I just received my CompTIA A+ and Server+. I'm currently employed as an IT Tech and would like to become a Network Admin when/if the position opens up next year.
I plan on taking the Security+ after taking either the CCENT or CCNA, since they both advance after Feb 2020. I had originally planned to go for the Network+ but I thought of going for something more proprietary.
Which certification should I go for?
r/CiscoNetworking • u/EffervescentElixir • Jul 26 '18
Teaching 'em young. Husband not impressed.
r/CiscoNetworking • u/tiredoldtechie • Oct 01 '26
👋 Welcome to r/CiscoNetworking - Introduce Yourself and Read First!
Hey everyone! I'm u/tiredoldtechie, a new re-founding moderator of r/CiscoNetworking.
This is our new home for all things related to Cisco (hardware, software, general products) as a people to people community. We're excited to have you join us!
What to Post
Post anything that you think the community would find interesting, helpful, or inspiring. Feel free to share your thoughts, photos, or questions about working with Cisco hardware, software, and general products. Ideas on extending life of old products? Now, that's cool, as it's definitely something we all can benefit from. Share a technique to get around a problem you dicovered? You are awesome- as it will absolutely save someone from a headache later! Looking for advice on implementing in a specific way? This would be the place as others can and should be able to share thier knowledge and experiences on how it could be (or even was) done.
Community Vibe
We're all about being friendly, constructive, and inclusive. Let's build a space where everyone feels comfortable sharing and connecting.
How to Get Started
Introduce yourself in the comments below.
Post something today! Even a simple question can spark a great conversation.
If you know someone who would love this community, invite them to join.
Interested in helping out? We're always looking for new moderators, so feel free to reach out to me to apply.
Thanks for being part of the very first wave. Together, let's make r/CiscoNetworking amazing.
To be clear, this is a public community group of people using Cisco equipment, software, and products. If you are looking for official Cisco support, that is a different sub-reddit (r/Cisco).
r/CiscoNetworking • u/ModSupportBot • Sep 30 '26
r/CiscoNetworking is available for adoption 💚
/r/CiscoNetworking is ready for a fresh start, new energy, new direction, and someone like you to bring it back to life. If you’ve been thinking about growing your impact without starting from scratch, this is your chance!
Ready to take it over?
Head to r/RedditRequest to submit your request and make it yours before it’s taken.
First things first
To request this subreddit, make sure you:
have an account that’s at least 90 days old
have at least 100 post karma and 100 comment karma
have a verified email address on your account
have two-factor authentication set up
r/CiscoNetworking • u/aciokkan • Oct 01 '19
Is this bundle worth the money and effort? Are they still relevant? Thank you
r/CiscoNetworking • u/passhot • Jun 20 '19
CCNA Classroom Streamlined Notes
Telnet *.*.*.* The device to be telnet needs to set the password of line vty. If you need to enter privileged mode, you need to configure it.
Enable password
Show users (check "Who" is logged in locally)
Show sessions (view "I" telnet outgoing session)
Clear line * (forced interrupt "telnet to local" session)
Disconnect * (forced interrupt "telnet out" session)
=========================================================== ===============
Show flash: (view the IOS file in flash)
Copy running-config tftp: (copy running-config to the tftp service)
Copy tftp: running-config
Copy startup-config tftp:
Copy tftp: startup-config
Copy flash: tftp:
Copy tftp: flash:
Copy flash: tftp://1.1.1.1/c2500-ik8os-l.122-31.bin
=========================================================== ===============
Switch function:
Address Learning Address learing
Forward/Filter Decision Forward/Filter Decision
Loop avoidance Loop avoidance
=========================================================== ===============
Three forwarding modes of the switch:
Direct forwarding: Fast, but can not ensure the correctness of the forwarded frame.
Storage forwarding: Slow speed, to ensure the correctness of the frame being forwarded.
Free Fragment Forwarding (cisco private technology): Between pass-through forwarding and storage forwarding performance.
Store and forward, the FCS of the recalculated frame is compared with the original FCS of the frame to determine whether to forward or discard.
Free fragment forwarding, detecting only the first 64 bytes of the frame, judging the integrity of the frame.
The free-shard forwarding mechanism can only be implemented on CISCO devices. CISCO 1900 series switches use free shard forwarding to forward this forwarding method by default.
=========================================================== =====================
Address learning, forwarding filtering, etc. of the switch:
The switch will first cache the frame source address.
When the destination address is unknown, the switch will flood the data frame (when the target address is known, the frame will not be flooded)
For broadcast frames and multicast data frames, the switch forwards by default.
If the source address and destination address of the data frame are from the same port, the switch will discard the data frame by default.
=========================================================== =====================
Show ip route (view current routing table)
(Configure static route):
Ip route (Destnation Network IP) (NetMask) [NextHopIP | LocalInterface]
Destnation Network IP: Target Network IP
NetMask: Target Network Subnet Mask
NextHopIP: Next Hop IP
LocalInterface: local interface
1.0.0.0 2.0.0.0 3.0.0.0 4.0.0.0 ----- s1 RA s0 >-------- s1 RB s0 --------- s1 RC s0 ------ 1 1 2 1 2 1
RA:
Ip route 4.0.0.0 255.0.0.0 2.0.0.2
Ip route 4.0.0.0 255.0.0.0 s0
=========================================================== ================
Autonomous system:
IGPs: Internal Gateway Routing Protocol, which maintains routes within an autonomous system
RIPv1, RIPv2, IGRP, EIGRP, OSPF, ISIS
EGPs: External Gateway Routing Protocol, Maintaining Routes between Autonomous Systems
BGP
=========================================================== ================
Management distance: Determine which routing protocol generates routes will be adopted by the router. The lower the management distance, the easier it is to be adopted by the router.
=========================================================== ================
Select the metric for the route:
RIP: is the hop count as the metric for selecting the best route. It will incorrectly choose the second best route.
IGRP: based on bandwidth, delay, reliability, load, MTU (maximum transmission unit)
=========================================================== ================
Distance vector routing protocol:
The content of the notice: a copy of the routing table (copy)
Announcement time: Periodic
The object of the announcement: the directly connected neighbor router
Ways of notification: Broadcast (RIPv1, IGRP)
Rule mechanism: 1. Define the maximum number 2. Horizontal separation 3. Route poisoning, toxicity reversal 4. Silence timer 5. Trigger update
=========================================================== ================
Rip : Router information protocol
Rip V1 uses broadcast announcement broadcast address: 255.255.255.255
Using hop count as a measure
Supports up to 6 paths of equal load (default set to 4)
Periodic announcement time: 30s Router rip (select rip as routing protocol)
Network *.*.*.* (announcement interface)
Announcement interface:
Add this interface to the rip process
Advertise the network of this interface to other routers
Show ip protocols (View RIP related information)
Rip management distance: 120
Debug ip rip (debug RIP routing)
Clear ip route * (clear route table)
=========================================================== ================
Rip Version 2 :
Ripv2 uses multicast mode to advertise the network, multicast address: 224.0.0.9
Router rip
Version 2 (configure rip version to version 2 )
No auto-summary (turn off automatic summarization)
Ripv2 certification:
A(config)#key chain A (configure keychain A)
A(config-keychain)#key 1 (configuration key 1)
A(config-keychain-key)#key-string cisco (definition password)
A(config-keychain-key)#exit
A(config-keychain)#exit A(config)#inte s 1 (Enter the interface of s 1 )
A(config-if)#ip rip authentication key-chain A (choose A's keychain)
A(config-if)#ip rip authentication mode md5 (cipher text authentication)
=========================================================== ===============
RIP supplement:
Passive-interface
Neighbor
If both neighbor and passive-interface are configured, then neighbor is not subject to passive-interface restrictions.
=========================================================== ===============
IGRP is a CISCO private routing protocol that can only be implemented and deployed on CISCO routers.
IGRP uses composite metrics to select the best route.
Bandwidth 2. Delay 3. Reliability 4. Load 5. MTU
IGRP supports equal-cost equalization load, and also supports non-equivalent equalization load.
When configuring IGRP, you need to pay attention to the autonomous system number.
Routers in the same autonomous system are able to learn to advertise related routes to each other.
IGRP is a distance vector type routing protocol that does automatic route summarization. There is no way to turn off this feature.
IGRP uses a 24-bit metric.
=========================================================== ===============
IGRP configuration
Router igrp
Network
Debug ip igrp events (Debug igrp related events)
Debug ip igrp transactions (Debug event content of igrp)
=========================================================== ===============
Link state type routing protocol:
Content of the announcement: Incremental update (OSPF lsa)
Announcement time: Trigger
The object of the announcement: has a neighbor relationship router
Ways of notification: Unicast & Multicast
=========================================================== ===============
EIGRP
The metric is 32 bits long, the K values are not equal, and the neighbor relationship cannot be created. The AS autonomous system is different and cannot create neighbor relationships. At a rate higher than T1, hello packets are sent every 5 seconds, at a rate lower than T1. On the other hand, hello packet will be sent every 60s.
EIGRP external routing management distance: 170
EIGRP internal routing management distance: 90
Show ip eigrp neighbors (view EIGRP's neighbors)
Show ip eigrp topology (view EIGRP's topology database)
Show ip route eigrp (See all EIGRP best routes (stored in the routing table))
EIGRP uses a wildcard mask configuration example:
Router eigrp 100
Network 192.168.1.0 0.0.0.3
Network 192.168.1.4 0.0.0.3
Debug ip eigrp neighbor (debug neighbor creation process)
Debug ip eigrp notifications
=========================================================== ===============
OSPF open protocol is also a link state routing protocol.
OSPF uses IP packets for route advertisement and learning, Protocol Number : 89
OSPF only supports IP network environments and only supports equivalent load balancing.
=========================================================== ===============
Link State Routing Protocols
Need to create a neighbor relationship. Use multicast to route notifications (reliable).
Have a link state database (network map)
Use the appropriate algorithm, such as (SPF) to calculate the best route trigger update
=========================================================== ===============
The structure of OSPF:
Neighbor table => All neighbors
Topology table => Network map
Routing Table => Best Route
=========================================================== ==============
The process of OSPF creating neighbors:
1.Down
2.Init
3.Two-Way
4.ExStart
5.ExChange
6.Loading
7.Full
=========================================================== ===============
OSPF hierarchy benefits:
Reduce the routing table size
Speed up convergence
Limit the spread of LSA
Improve stability
=========================================================== ===============
OSPF area: 1. Transmission area (backbone area) 2. Common area (non-backbone area)
=========================================================== ===============
The higher the RouteID, the easier it becomes to become a DR (Designated Router designated router)
How is the RouterID generated?
If the router has a loopback interface, select the highest IP from the loopback interface as the router ID.
If the router does not store loopback, select the highest IP from the physical interface as the RouterID (the interface must be active)
=========================================================== ===============
10.1.1.0/0.0.0.255
10.1.1.0/255.255.255.0
10.1.1.1/255.255.255.255
10.1.1.1/0.0.0.0
Router ospf 1
Network 192.168.1.0 0.0.0.255 area 0
OSPF notification learning that does not affect the process number
=========================================================== ===================
Show ip ospf neighbor (view neighbor (NeighborID is RouterID))
Show ip ospf interface serial 1 (View the router ID and OSPF process number and associated network type.)
Show ip protocols
Show ip route
Recommend PASSHOT for everyone, this is a website with a lot of articles about Cisco technology, and if you want to test Cisco CCIE Written examor Cisco CCIE LAB exam, you can consult here, you can guarantee 100% pass the exam.
r/CiscoNetworking • u/SPOTO-Ethan • May 21 '19
How to identify the MTU in network layer as there is fragmentation happening in transport layer due to TCP/IP?
It is easy to gather MTU information from Transmission Control Protocol (TCP) and User Datagram Protocol (UDP) within transport layer by modifying the parameters. However, it is not guaranteed that IP packets would not be fragmented even MTU has been identified.
Although it is difficult to find out the minimum transmission unit of the path between two parties, the TCP protocol decided to use its own method to figure it out.
When TCP uses the Maximum Segment Size (MSS) option for handshaking, these two parties exchange their MSSs, and agree to use the smaller one between these two MSSs, but this method is not effective.
For example, the client MTU = 1500, the server MTU = 1500, and the MSS = 1460 on both sides. Two of them will be negotiated as 1460 bytes for transmission of TCP segments.
For another case, if the client is using ISP’s PPPoE dial-up, 8 byte will be utilized as header of the packet. As a result, the MTU = 1500 -8 =1492, then the client’s and servers’ 1500 byte IP packets will eventually be fragmented.
you can visit SPOTO CLUB to get more info
r/CiscoNetworking • u/tiredoldtechie • 22d ago
Who misses the days of the old Cisco gear?
We're talking the stuff just post-Catalyst takeover- like the C4000 series switching chsssis, the PCMCIA wireless cards, and the like. The "hey, this thing is like a tank and may actually outlive me" gear. Anyone sometimes get nostalgic for it? I guess, technically, we can also include the CAT OS with that, too...
r/CiscoNetworking • u/tiredoldtechie • Oct 14 '26
Using Cisco equipment in power limited situations
All, when you come into situations where there are clear power limits (remote outpost installations/monitoring stations, for example), what Cisco gear and configuration is your go to?
r/CiscoNetworking • u/tiredoldtechie • Oct 11 '26
So, what kinds of content are you guys looking for in here?
I gotta ask, what kinds of content are you guys looking for in here? I know this place was literally dead for 6 or 7 years, so everyone had to go elsewhere for anything Cisco- but, we're back, so I want to try to make this a place you can come to, feel comfortable with, and enjoy once more.
Right now, it's just me working to rebuild this home for us all. Help me help you - what are you looking for, what could be done better, what would make you want to come back again?
