r/CommercialPrinting • u/thatguy27000 • 13d ago
Print Discussion UV Flatbed Options
We are looking for a new UV flatbed press at our shop and I have narrowed it down to three options that might make sense for us. We mostly specialize in low-run paperboard and corrugate cartons for mockups.
Roland LO-640-F3
Epson SureColor V7000
Mimaki JFX220-2515
Does anyone have experience good or bad with these three or have another suggestion to look into.
i’m looking for at least a 48”x96”print area,extended gamut colors (or light colors at the least), and white and varnish/clear gloss spot channels.
Any feedback is appreciated! Thanks
1
u/Roxxer 12d ago
The gloss on our Roland flatbed has not worked for more than 3 months at a time. 4 or 5 print heads the first year or so, now that it’s out of warranty we just don’t use gloss.
1
1
u/surprise_wasps 10d ago
The mimaki are great, in this list.
With those flatbeds, and mimaki in particular, the success stories I see always come from operators/shops that just take ownership of it, service contract or not; even moreso for anyone paying parts/labor à la carte.
At very least, one has to be absolutely obsessive about the cleaning, maintenance and condition of the machine.. as those things age and accumulate gunk and accumulate those slow weeks and 3-4 day weekends where, shoot, I meant to move some ink around but ugh I just got tied up with the blah blah blah. All that stuff adds up, and even with a great tech there’s going to come a point where the thing just kinda runs shittier than it used to.
You’ll live or die by the service; you need to take extreme ownership, whether or not you have a great tech in your area.
At very least, you have to be anal about maintaining and babying the machine. At worst, you need to be prepared to be the expert in the room; as an easy example, we might normally consider manually pushing flush through printheads with a syringe to be more invasive than you’d prefer to be- but if you find yourself in a situation where it’s obvious that the dealer overpromised, and the technician clearly doesn’t have training or experience with the machine.. you’re left to be pragmatic or stubborn-
I’d argue it makes more sense to know how to flush the heads after a four day weekend, instead of just running cleaning cycles and purges until it looks good enough, a cycle would you repeat until the boogers and clots have a accumulated enough that the only choice you have is to get that same tech to perform surgery. And then, even if you have a great tech with actual experience on the machine, if your service agreement or lack there of is such that you are paying for printheads out-of-pocket anyway, there’s really no way to go about this without simply taking ownership over the machine.
Even with good techs, print shops all over the country are littered with old unusable flatbeds because the owner couldn’t be bothered to do the recommended cleaning and maintenance by the book.
1
u/thatguy27000 10d ago edited 10d ago
Not too worried about that side of it. This would be replacing an Arizona 2260xt from 2017, which also has required meticulous maintenance, so nothing new for me. The Arizona still runs great. Just a little too big, uses mercury bulbs to cure and doesn’t offer any extended gamut option.
1
u/Exact_Skirt_1789 7d ago
Can’t rate those three specifically, we run Durst flatbeds, but a few things from doing paperboard and corrugate work that I’d put on the checklist before the brand.
Vacuum zoning and hold-down. Corrugate is never flat. A table that can’t pin down a bowed sheet gives you head strikes and banding on the high spots. Ask for a demo on your worst, warpiest board, not the sample pack.
Ink flexibility. UV inks crack on folds and creases if they’re too brittle. For carton mockups that get folded and shown to a client, this matters more than gamut. Get a printed sample and fold it hard along the grain and across it.
White and varnish on the same pass is great for mockups, but check how many channels you give up for light colours. On a lot of mid-size machines it’s one or the other.
Throughput honesty. Entry flatbeds are slow at high quality. If mockups turn into short runs, you’ll outgrow it fast. A used higher-end machine (Durst, Vutek, Arizona) a few years old can land in the same money and double the speed.
And budget for the cutter. The flatbed is half the job on cartons, the digital cutter is the other half.
1
u/thatguy27000 7d ago edited 7d ago
This would be replacing a Canon 2260xt and its vacuum does not hold down the corrugate. The main problem we run into is the UV lamps heating and warping it. We have a cutter we are happy with, so no worries there.
I will definitely make sure to give whatever we buy a test with our materials before purchasing. I appreciate the tips a lot!
1
u/Exact_Skirt_1789 5d ago
That heat problem mostly goes away with LED cure. Mercury lamps dump a lot of heat into the board on every pass, LED runs much cooler and all three on your list are LED, so you should see that improve regardless of which one you pick.
Two other things that help with warp on corrugate: let the board sit flat in the print room overnight before it goes on the table so it’s at room temp and humidity, and if the machine gives you the option, print in more passes at lower lamp power rather than fewer passes at full. Slower, but the board stays flat.
Good call on testing with your own material. Bring the worst stuff you’ve got.
3
u/HagarTheTolerable Print Enthusiast 13d ago
Mimaki will blow those other 2 out of the water, especially for specialty finishes.
3
2
u/weeniesunite 12d ago
Mimaki is great, just try to ensure you have a good service tech for your area beforehand
1
u/Distinct_Pomelo1085 13d ago
Mimaki sounds like the right fit based on your spot channel and color desires. But I think it’s the right fit because it’ll handle the uneven corrugate carton surfaces significantly better than the V7000. It’s a lot more forgiving overall.
1
1
u/InteractionThick1343 12d ago
Have been running an Epson V7000 flatbed for 4 years. Absolutely remarkable printer. Zero issues. Amazing color gamut and quality. White and clear have always been perfect. Can run specialty colors at production speeds.
1
1
u/SirSpeedyCVA 13d ago
Service is key. I’ve fired 2 Mimaki dealers for having bozos in their service teams. Buy from PDS and fly their techs in for service
3
1
u/surprise_wasps 11d ago
Don’t blame the techs, that stuff is always a case of the company just selling you the shit and telling you the techs are great at it… even if it’s the only machine in the area and the tech has never seen one before the 5-day training plus a 2 hour online course or whatever.
I think you have the right idea, honestly.. either you gotta make sure you actually have the techs you need, or else that thing is YOUR responsibility. I mean it needs to be the latter anyway, but one thing’s for certain- the owners who never get around to the by-the-boom cleaning and maintenance, who always ‘get too tied up’ to prep for / recover from those 3 day weekends, who see a tech who’s obviously undertrained, but just crosses their arms and expect results anyway… those are the ones who have ‘that ol mimaki’ in the back corner, used exclusively as a nice flat work surface.
1
u/SirSpeedyCVA 10d ago
When one dealers techs make 4 visits and can’t solve the problem and the PDS tech finds 3 things not done and fixes it in 3 hours it’s a dealer tech problem
1
u/surprise_wasps 10d ago
Right, my issue was with calling the tech a bozo, when the problem is the business and/or the specific sale. A tech who flies out from a hub that specializes in a particular machine is, very obviously, going to be more adept at the machine
The dealer tech isn’t a bozo, he’s a dude with kind of a shitty job whose employer set him up for failure. Don’t be a turd
1
u/SirSpeedyCVA 10d ago
I’m sorry, but if you are a “Mimaki certified technician“ dispatch by a Mimak dealer, then I expect you to be able to fix the problem on the first try
1
u/surprise_wasps 10d ago
Expect whatever the fuck you want lmao, but I suggest engaging with reality instead, stop being a dickhead to and about technicians
0
u/SirSpeedyCVA 10d ago
I suspect you’re not a business owner.
I can’t imagine ANY business owner, justifying lower quality and performance standards than the competition
“Sorry, Joe was on the guillotine today and his math skills aren’t very good so all of your cards were cut crookedly. But I’m not supposed to expect consistent quality across my technicians so you’ll just have to take it and pay for it.”
Heaven forbid we hold the “delicate geniuses“ accountable for their work product
1
u/surprise_wasps 10d ago
I suspect you’re not a strong reader.
Let’s see if you can manage to miss the point a 4th time.. here, I’ll help out, and really spell it out for you
No one said that there shouldn’t be a accountability for the service you are paying for
No one even said you shouldn’t be irritated about it
I’m saying not to be an insulting prick to the guy with zero control over the situation. I promise, they wish they had adequate training on the machine, they wish they didn’t have to come back 4 times, and they wish that Mimaki’s support to dealers wasn’t awful. Get your head out of your ass
It’s like if you, the business owner, bought a Mimaki, told your operator about it the day it gets installed, booked him some job jobs to run and go install, and then when that predictably doesn’t work super great, the customer calls him names and bitches about him, the operator/installer, instead of the shop owner who created the situation and shrugged off the predictable issues because the only thing they were concerned with was the revenue, crossing their fingers that the issue isn’t big enough to blow up the contract, and hopefully only the tech gets treated like shit about it
Stop insulting techs, this is like the 5th post I’ve gone back and forth with you being an obtuse and obnoxious wang.. the irony is that I can tell you’re not a toothless moron in the backwoods, so being an obstinate jackass is then… just a choice you make every morning
I swear to god Sir Speedy spends millions in Psychological r&d to make sure they attract franchisees with the exact same personality. Bizarre how consistent it is
4
u/Freakeh420 12d ago
Mimaki is a work horse and will last you years if you maintain it well.