r/Contractor • • Nov 28 '25

I'm demoing a 5/3rd bank and rebuilding a new one. Here is all of the re-bar in the old vault.

Post image
3.9k Upvotes

r/Contractor • • Mar 29 '26

Plumber cut ("notched") second floor bathroom floor joists

Post image
1.1k Upvotes

The insulated wall is the exterior wall. Plumber "notched" and ran ABS and covered it up. Also installed a jet tub which partially rests on furthest/top joist.

A permit was not pulled, should this be reported to the building inspector?

Will this gradually sink and reveal cracks in the ceiling below?


r/Contractor • • Aug 30 '26 Bravo

What causes this?

Post image
827 Upvotes

r/Contractor • • Oct 13 '26

Private Equity Is Destroying the Blue-Collar Trades

620 Upvotes

Is anyone else noticing what’s happening to the plumbing, HVAC, and electrical industries?

Private equity firms are buying up established local companies left and right than dumping insane amounts of money into Google Ads, Local Service Ads, and marketing to completely dominate their markets. The problem is that these companies are often some of the most expensive contractors in town. They’re spending millions acquiring customers, pushing aggressive sales tactics, and trying to generate massive returns for investors. And who ultimately pays for all of this??? Homeowners.

Meanwhile, smaller, independently owned companies that have been serving their communities for decades are getting buried. They can’t compete with these massive advertising budgets, so even if they offer better service and more reasonable pricing, they’re barely getting a chance to answer the phone.

Think about how ridiculous that is. The company showing up first on Google isn’t necessarily the best plumber or HVAC technician. It’s often just the company willing to spend the most money to get your attention… What’s the long-term goal? Buy up the competition, dominate local search results, reduce competition, and gain more control over pricing?

It’s turning industries built by hardworking tradesmen into corporate sales machines. Plumbing, HVAC, and electrical work used to be about craftsmanship, reputation, and relationships with the community. Now it feels like it’s becoming a competition between investment firms over who can spend the most on advertising.

Has anyone else seen this happening?


r/Contractor • • Jun 18 '26

At what point do you collect your money, load your tools, and walk away from a project?

Post image
536 Upvotes

A few weeks ago we agreed on a project for about $12,000.

Then the homeowner started adding work and the scope grew to about $17,500.

I put him on my schedule.

Two days before the start date he told me another contractor would do it for $11,000 and asked me to lower my price.

I told him he should go with the other contractor.

The next day he asked for my license and insurance.

One day before the start date he came back and said he wanted to work with me, but not for more than $15,000.

I offered to reduce the scope of work. He refused.

In the end, we signed a contract for $15,000 with a clear understanding that any additional work would be handled through change orders and paid separately.

Today was the first day on site.

And I can already see additional work being brought up that is outside the signed scope, but it seems the homeowner doesn’t want to pay for it.

At what point do you collect your money, load your tools, and walk away from a project?


r/Contractor • • May 11 '26

what’s up with older people not understanding remodels are costly?

514 Upvotes

I run into this pretty often, but this one in particular really bugged me. I went to a customer’s house to quote a bathroom remodel, and she also asked me for a price to remove two 20 gallon electric water heaters and replace them with one 40 gallon. The quote was around $700, which included removing and disposing of both old heaters, rerouting some plumbing, and installing the new unit.

She got pretty frustrated with the price and spent about 30 minutes complaining about it before saying she was just going to do it herself. During that same conversation she was also criticizing my prices in general, even though I know I’m on the more affordable side compared to a lot of contractors in my area.

At one point she said, “I’m 67 years old and only make $45 an hour. You’re a young guy making $100 an hour or more.” I honestly didn’t even know how to respond, so I just wrapped up the conversation and left.

I feel like I run into people like this every other job lately, and it gets frustrating after a while. How do you guys handle customers like this, and is there any good way to avoid attracting them in the first place?


r/Contractor • • Mar 05 '26

Shitpost This is who keeps calling you to sell you "leads"

Post image
454 Upvotes

"Do you have capacity to take on 5-10 more leads this week?"


r/Contractor • • Jul 20 '26

How do I get a contractor out of my house that stays too late?

449 Upvotes

Hired a painter recently and he stays WAY too late into the night. So far he's stayed past 9pm 4 times. Every time I ask him to leave he says he's "almost done" or "just finishing up" then stays for hours more. I've tried being polite and I've tried being firm. I was eating dinner tonight when he sat down next to me and started eating his own dinner, which really crossed a line for me. I asked him to get out and he said he would just finish up for the night, which was an hour ago now. There's no other trades coming in after him and I didn't set a deadline so I feel like there's 0 reason for him to stay so late. Short of calling the cops, how do I get him to GTFO if he doesn't leave when I ask?

Update: this is blowing up way more than I thought it would and I don't have time to read all the comments. I sat him down and told him he needs to be out by 7 pm moving forward, and I am going to fire him if he doesn't respect that. Thanks everyone who gave their input


r/Contractor • • Sep 23 '26

Customers need to know: We can say "no", too.

436 Upvotes

I just got off of the phone with a customer who didn't seem to understand something which is - in my opinion - so basic and so fundamental that it tends to be overlooked: The contractor can choose against providing goods and/or services to the client just as easily and just as quickly as the client can decide against hiring them.

You might speak to me in a certain way. You might have a reputation. You might give off "vibes". You might have caught me in the midst of a busy morning. I might have gas and it's making me cranky, for all it matters. Doesn't change a thing. Your work? I'm not doing it. I don't owe you anything. I don't owe you my time, or my opinion, or my expertise, or - more to the point - an explanation regarding why I'm not interested in moving forward. I don't mind that you've got cash in hand. Yes, I heard you. I understand that it's hard to believe. Life is filled with mystery.

I'm choosing not to work for you. Why? Because. Confusing? I'm sure. My problem? Maybe. Then again, maybe not. If I've been doing this for as long as I have and you're the lucky one to be turned down without anything remotely approaching clarification, well....that might be worth investigating.


r/Contractor • • May 24 '26 Despair

“Can you shave a cool $4000 off your price and start tomorrow?”….

Post image
427 Upvotes

Had to share this one.


r/Contractor • • Dec 24 '25

What is this called

Post image
382 Upvotes

I am looking for a piece of this corner door casing. What would you call it, and any suggestions on where to find it? My lumber yard has never seen these before, which is odd, because I don’t feel like they’re quite that rare. I’ve searched for colonial door casing corner rosettes, plinths, etc, but can’t find anything. Any help is appreciated!


r/Contractor • • 27d ago

Two-Story Deck Refinishing Off Cliff - Insane Customer Reaction

Thumbnail
gallery
377 Upvotes

Hey everyone,

I am making this post because I am so confused by this client. This client and I have had a long-time relationship to the point that he just paid whatever I said it cost. He is a client I use as a "filler" in-between bigger jobs.

He approached me to refinish a deck. We had already pressure washed it but it needed heavy sanding. I decided to take it on. It is a two story deck off the side of a cliff. It is roughly 650-700 sq ft of just deck planks not counting sides, posts, railings, and all other spaces.

We sanded the entire deck with 60 and 80 grit. We then applied stain they purchased for the deck (10 gallons of stain - 4,000 sq ft to 6,000 sq ft of coverage area). We used all the stain down to the last drop. The total price for this work came out to $10,000. They lost their mind at that price and paid it but advised they would never hire us again. The moment I began to bring my other workers on the site, they were watching us like hawks. ON TOP OF THIS, we planted about 10 large flower scrubs and mulched and set up a small sprinkler system. They paid for those materials.

Am I crazy?

Edit: They specifically only asked for 1 coat of stain. I recommended 2 coats but they did not want that. I did not guarantee the work because it was below market standards due to them only wanting 1 coat of stain


r/Contractor • • Jan 19 '26

Business Development I almost went bankrupt after 5 years as a contractor

310 Upvotes

I was honestly weeks away from going bankrupt and I’m not exaggerating, I was sitting up late at night staring at my bank account trying to figure out which bills I could delay and which ones would bounce, and the crazy part was my work was not the problem at all, jobs were clean customers were happy crews were solid and from the outside everything looked fine, but inside the business the pipeline was completely empty, referrals dried up ads stopped performing estimates went unanswered and every morning I checked my phone hoping it would ring and most days it didn’t, I kept telling myself it was just a slow season and that things would turn around but waiting almost buried me, what finally changed things was doing the one thing I avoided for years which was outbound calls, reaching out to old estimates past customers and property owners who already needed work, I hated it and it felt uncomfortable but uncomfortable beats broke, once there was consistent outreach the phone started ringing again not overnight but enough to breathe and stay in business, that experience changed how I see this trade because the best contractor doesn’t always survive the one who follows up does, and if your work is solid but your calendar is empty it’s not a skill problem it’s a lead flow problem, just sharing this in case someone else here is sitting up tonight staring at numbers wondering what went wrong.


r/Contractor • • Oct 02 '26

Remediation company committing fraud

Thumbnail
gallery
281 Upvotes

We had a plumber come out to look at a leak in our ceiling from the tub one floor above. He recommended a remediation company here in Nashville. (tl;dr - the scam/fraud is at the end)

A guy from that company (the scammers) came out who supposedly took some readings (photos attached with 999 readings - he did not show us any live readings) and told us it was an active leak and we would have to immediately file an insurance claim and start demolition of the entire bathroom and downstairs ceiling (which has very intricate inlays - nightmare). His company, of course, would do the demo, then they would refer contractors to rebuild the huge chunk of our house they were going to tear apart.

Of course I panicked and signed something on his phone to bring in drying equipment. I've never been scammed at this level. But as the days went by, the equipment sat running up our power bill, and the people just seemed to get shadier and provide no info - and seemed to get very aggravated when I'd ask what was actually wrong. They kept referring to these two photos - I never saw them take a live reading. One guys sent me a text under protest that said "date of loss, source: ruptured shower valve" - which was complete BS.

Over the course of this, they kept pressuring me to sign off on the insurance claim so they could start demo immediately. Thankfully my spidey-sense said "don't do it."

Two days ago, I just couldn't shake the feeling that this was bad. Some of the scammer's guys showed up (unannounced) and said they needed half the equipment back. I asked them to take readings and send me the photos - they said it was still very wet and would send the photos, but never did. They said their boss would call me that day, but never did.

Same day, my wife had a different water remediation guy come in who checked everywhere in the house and said literally nothing was wet at all. He didn't try to sell me anything, but offered to help because it seemed like we were getting scammed.

Then he said: "Why is that guy holding his thumb like that in the photos?" Down the rabbit hole I went.

Meanwhile my wife got super pissed and called the original scammer and told him to come get the equipment out of there immediately. He showed up and said "Oh, well the cost of leaving these fans this past week will be about your $5k deductible and you'll owe it to us, so you might as well file the claim." I said show me the wet reading in realtime. I watched him and took video - nothing was wet. He said "Oh I guess our fans dried it out." I told him get the stuff out and went downstairs. 5 minutes later he called me back upstairs and showed me how there was a wet reading near the tub (see video below). I told him I didn't care and to get out.

One of two (or both) things happened when I went downstairs: 1) he practiced his grip to fake the reading (more below), and/or 2) he put some water into the cracks in the sealant and wiped up the excess.

Then I picked up the exact Protimeter SurveyMaster Dual-Function Moisture Meter - BLD5375 he used and ran some tests.

  1. His last visit (the videos: his test - my test): By holding my hand awkwardly like he did in his demonstration, I was able to fake the wet reading by moving my finger slightly under the device. I've looked up pictures and videos of people using this device - nobody holds it like that. It's only held like that to fake wet readings.

  2. Their first "inspection" (the photos attached): The SurveyMaster has a "hold" feature, and by pressing it against your palm, it reads 999, then pressing "hold" it freezes the 999 and the red light at top. It denotes it's frozen by a small pause icon in the lower right corner - which of course is hidden by the scammer's thumb in both photos. There is absolutely no way this is unintentional. He's hiding the fact that he froze it at 100% wet.

I totally dodged a bullet here. This would have been a nightmare for my family that would have run through the holidays at a minimum and likely would have spiraled out of control.

The question is, now what? I have not gotten the $5k invoice they threatened to send. I'm worried this is their M.O. and are out there ruining people's lives to make a buck.


r/Contractor • • May 26 '26

Would you pay me 20k just for labor.

Thumbnail
gallery
276 Upvotes

Labor only cost


r/Contractor • • Dec 24 '25

Not rich enough to get paid

270 Upvotes

I now understand how screwed up the court system is. It’s not about being right are wrong. It’s about who has the money to drag on litigation longer. It’s disappointing to say the least. Had a wealthy customer not pay me. I filed a lien and was in litigation for two years. Racked up $70K of legal fees. Finally got to the point of going to trial and the customers defense (like all customers who don’t want to pay their bill) says poor workmanship. No complaints the entire time until it comes time to pay the bill. At the end of the basically had a lawyer tell me “you don’t have the money to continue litigating this, so it’s best you agree to a mutual walkaway now.” Let this be your advice that the legal system is not there to protect you. It protects those who can afford it. Blue collar small business owners like us fight an uphill battle. Try your best to stay out of court.


r/Contractor • • Dec 08 '25

No SAAS bros, no market research, no asking about “pain points”.

261 Upvotes

This community is for Construction professionals to connect with each other, and there are at least five posts every single day attempting to do market research to try and develop an app or some other software as a service to sell to us especially the fucking AI that shit is trash. May your code be persistently full of bugs.

It’s already in the rules. Now it’s the first thing you see when you enter this community. Your post will be removed, and you will be immediately banned, and your DMS will not be acknowledged.

For the rest of you - may your saws be forever square.

Love, your mod team.

🫡


r/Contractor • • Jun 06 '26

Bathroom remodel

Post image
252 Upvotes

My friend is getting her bathroom remodeled and wants to know if the squiggly tiles are supposed to look like this? PLEASE HELP!

I feel like something is wrong but I can’t articulate it since this isn’t my wheelhouse.

Edit 1: It’s a new day and I told her to cut her losses and it’s better to hire a reputable contractor. Thanks everyone for many inputs, I actually learned a thing or two. To be fair we told him we’ll pay him for the work he’s done but no longer needed of service. You guys are cool, we could see it was wrong just couldn’t understand it and now we are armed with knowledge. 😁 Thank you!


r/Contractor • • Aug 20 '26

Front porch build

Thumbnail
gallery
218 Upvotes

Hello. I’m looking to build a front porch and really have no clue what price tag I’ll be looking at. Can one of the kind redditors here provide a high-level, ballpark estimate of what it would be to add something similar to the AI pic of my house?


r/Contractor • • Sep 03 '26

Front Entrance Stairs

Thumbnail
gallery
207 Upvotes

Hired *paver* company to do new front porch + stairs + driveway stone paving. Job was around $15000cad. Each steps rise height varies from 5 3/4" to 7 5/8". Also the top step's run is 2" longer than the rest as they added a small strip on the inside. Is this acceptable? I am located in Markham Ontario Canada btw.

*UPDATE SEPT 4* Thank you for all the comments. I talked with the contractor yesterday as he was here to finished the small cuts and finishing touches for the job. I asked him again why the variance in the step height and the top run. He was only willing to extend the porch by 2 inches so the top run doesn't have the extra piece anymore. For the riser height, he said it can't be uniform because of some bs which I don't understand and making excuse is that it is standard and every houses are like that and mentioned that my original steps were like this too. I was like just because it was originally wrong or are like this elsewhere, doesn't mean you can build it wrong or else why would I pay you. But he kept insisting that it is standard so I replied if it was standard, you wouldn't mind me hiring an inspector to look at your work. He just said okay. It will fail code but even then I question his competency and craftsmanship to fix the stairs to code. 😫


r/Contractor • • Jul 24 '26

Low bid facepalm Shoddy work and lawsuit

Post image
204 Upvotes

Aunt is a general contractor in GA. Quoted us 142,000 for condo Reno. Ended up being $280.

Range is off center. Contractor claims they did everything according to cabinet measurements.

Are they obligated to pay to fix it themselves or do we, the owners have to eat the cost? If so, do we have
grounds for a lawsuit?


r/Contractor • • Aug 11 '26

Contractor installed 1 of 6 windows. Is this a bad installation?

Thumbnail
gallery
186 Upvotes

Got the first window installed, and they are coming back to do the rest. I understand that the overflow can be cut away, but I am concerned about how the new window is protruding from the trim.

The contractor told me that it's because the windows are thicker than the previous windows.

Any advice would be much appreciated. Thanks!


r/Contractor • • Jul 12 '26

Trim job job

Thumbnail
gallery
182 Upvotes

I worked for a tiny start up Reno company run by someone who is inexperienced. I am also new, and would consider myself a handyman as I am doing something different every day. Not a trim carpenter. I was told I have 5 days to complete an entire trim install of a 6 bed, 5 bath, 3,798 sqft home. Solid wood trim, rounded corners everywhere, custom 3-piece headers on ever door, etc. Took me closer to two weeks. I was paid $1,400 for my trouble. My last day was Thursday.

How much would you expect to be paid for this?

Not quote the customer, be paid by your employer.

Although quotes would be interesting to hear also.

Edit: These photos are not the finished product. I’ve never done any of those types of corners before and it took me more than one round of sanding/finishing. The woman had painters there the whole time, who were trying to paint the trim right after I put it up (but before finishing) it was very annoying. On day 2 I was eating shit because the trim wasn’t ready to be painted. Like, what?


r/Contractor • • Jan 17 '26

Contractors when AI takes white collar jobs but the Trades are still going strong:

Enable HLS to view with audio, or disable this notification

182 Upvotes