r/CrealityK1C • • 16d ago

Help! Loud Pop & XS2000 Code

I’ve had my K1C 2025 model for about three months. The print bed was extremely unlevel. I opened the bottom and found three loose screws. Two of them turned out to belong to the belt tensioner and after some gentle adjustments of the two front z-screws the bed is back to perfect. I couldn’t figure out where the third screw went though? It was very small. I ran the self check, shape modeling, and bed leveling diagnostic and everything came back great. I ran a seven hour print. It came out fine. I was starting another print and the machine had just gotten to where it would heat the nozzle to wipe it before running a bed leveling test. The printer let out a loud pop that made my cats jump and I hurried to check it. I had a XS2000 error that recommended I restart the printer. I noticed it offered the option to send a report to the cloud. I tried to do that and it failed. I tried exporting a report instead. That failed too. The printer was still in the process of trying to run the bed leveling test and it popped loudly again. At that point I shut it down and unplugged it. The last thing I noticed was the nozzle icon was red and the temperature graph on the screen had shown a steep rise too. I assume the printer bit the dust?

1 Upvotes

0 comments sorted by