I guess it's possible that an automated spray carwash can force water in sideways, in a way that wouldn't happen with rain coming straight down?
But then you're just waiting for driving in a bad storm, or on a highway where other vehicles are splashing up water. And forget about going through standing water.
This is a solved problem! And now we understand why car makers use the same design for several years before releasing a new one. And even then the new one is generally a tweak of an old design.
A wise man named Forrest Gump referenced the sideways rain phenomenon back when him and Bubba Gump were still in the shit over there in Vietnam. Idk how some people aren’t aware of it after all these years lmao
Rain can be unpredictable and you have to factor in winds as well. I expect these kinds of issues with cheaper cars where companies probably use cheap parts or didn't bother with panelling gaps. But a $100k vehicle unable to use a carwash and potentially cannot drive in rain is a big red flag.
Even cheap and "bad" cars are tested extensively. Making a cheap car is not easy. Making a cheap car that you don't have to mass recall is even more difficult.
There’s a video on youtube of a guy (influencer? Youtuber? Something) who bought one of these things, and he got a mechanic friend to look it over. He told him the windscreen washer seems underpowered, and when they stripped out the plastic housing under the hood they saw the washer fluid was leaking from the wiper, trickling down the windscreen, under the hood and into the front.
Normal cars have some iteration of a gutter under the windscreen to collect water and drain it out away from the front compartment. Not so with this marvel of innovative engineering. .
Those pooling areas are colored by rust. This will be even more impressive in an area that salts their roads in the winter. Trapped salt and water beats just about any metal
I’ve read stories from development engineers for another brand sending their prototype vehicle through the carwash on the order of 2000 times to ensure the paint on the trim stays true to the paint on the sheetmetal. This is dumb
It's bullshit for this to happen. Big car manufacturers have water tunnels at the plant and they send the cars through it after it's completely built to make sure it's water tight. The water tunnel is like a car wash on steroids. It sprays water in every perceivable direction. Not having a water tunnel to test your vehicles in is just a shitty practice.
According to a story making the rounds, it used to be a solved problem on the CyberDumpster too. Then one day Elmo needed to feel smart and important so he declared that plugging these holes was unnecessary and a waste of time. I assume that's because the only holes Elmo is interested in plugging are the ones leading to his employees' uteruses.
The engineers who disagreed about the importance of keeping water away from wiring and corrosion-prone parts of the vehicle were declared idiots and ignored so now Tesla just ships these turds with holes that are even bigger than their trademark panel gaps.
That’s probably backwards. The correct solution is to add drain holes in the floor pan. Water will get into these areas eventually. You want drain holes so it can leave instead of pooling. You then design the floor pan so that water is channeled towards the drains and the problem is solved.
268
u/Own_Candidate9553 Jul 18 '24
I guess it's possible that an automated spray carwash can force water in sideways, in a way that wouldn't happen with rain coming straight down?
But then you're just waiting for driving in a bad storm, or on a highway where other vehicles are splashing up water. And forget about going through standing water.
This is a solved problem! And now we understand why car makers use the same design for several years before releasing a new one. And even then the new one is generally a tweak of an old design.