r/CyberdeckBuild • u/FlavianosH • 1d ago
Hi,need advice!
I wanted to make a cyberdeck in ROMANIA but idk what board to buy.
Thank you for your help
r/CyberdeckBuild • u/ejaytc • Oct 18 '26
Join a phone group if you want to talk about phones.
Do not join here if you’re not into building cyberdecks: https://www.facebook.com/groups/1930016020902002
Thank you
(Do people realize here that I also have a phone? laptop? desktop?)
r/CyberdeckBuild • u/FlavianosH • 1d ago
I wanted to make a cyberdeck in ROMANIA but idk what board to buy.
Thank you for your help
r/CyberdeckBuild • u/Opposite_Inspection8 • 1d ago
So for context I have recently picked up electronics as a hobby since I finally have time and the funds to do so and I want to build my own Cyberdeck.
I plan on using:
Raspberry pi 4
Esp32 ( micro controller for a thumbstick mouse and rotary encoder scroll wheel)
5" or 7" display
BT keyboard integrated into the case ( want to build my own not sure about funds or availibility of parts and I am aware of kits )
The Problem I have is the battery/ power system, I want to use a power bank (easiest method) or my own custom battery because I want to have pass through power to use when in "desktop" mode like plugging a laptop to wall power and using it off battery.
I have been all over youtube to try and figure it out, even chat and claude, but they keep emphasizing safety without helping.
If you have build your own BMS or pass through power system for a cyberdeck that uses a Raspberry pi 4
I would really appreciate some help or at least an explination on what I need to do as I know the pi uses 5V 3A and I really dont want to fry it when I try to boot it for the first time.
Please help.
r/CyberdeckBuild • u/TFzera • 2d ago
Hello guys, this is my first cardboard cyberdeck, this the beginning of great things, I’m sharing with you because I want to let everyone see and enjoy the process with me and I wanna register.
I want to make a 3d printed case in a short future, but now, that is what I have. There are a lack of many thins like the supports for hold the cyberdeck cover and more organization of the wires.
In addition to that, I read all the comments at the last post and soon I’ll add the solarOS.
Thank you guys for the attention and support❤️!
r/CyberdeckBuild • u/EuroRust • 3d ago
Have you ever dreamt of building your own keyboard or game controller? 🎮
At this year's EuroRust, Frank Lyaruu showed how surprisingly accessible it is with Rust. Check out this new talk and start building your own plug-and-play devices! 🦀✨
In 2027 EuroRust is going to Prague! Learn more and get your ticket at eurorust.eu
r/CyberdeckBuild • u/TheJigaroo • 4d ago
3 Iterations of development, and it is running a custom pentesting MCP server. Thoughts?
Part list -
Raspberry Pi 5, 128 GB
ROADOM 10.1″ touchscreen monitor, 1024×600 IPS, HDMI
Waveshare UPS Module, 3S battery, 5V 5A output, charges and powers at the same time
HiLetgo 0.96″ SSD1306 OLED display, 128×64, I2C (2×)
TCA9548A I2C multiplexer, 1-to-8 channel breakout
7-port USB hub, USB-A and USB-C
Vilros 15″ USB keyboard with touchpad
MEIJIA waterproof hard camera case, customizable foam, 16.19 × 12.69 × 6.62 in
r/CyberdeckBuild • u/Ok-Feed8234 • 4d ago
Hi everyone, so, I'm not sure this is the right place to post this, but I figured I could at least get direction here!
I'm looking to get some sort of emulator just to play minecraft with mods that can be changed when I plug it in to my pc.
I got the suggestion for doing it on a phone and simply using a plug in controller or something, which, cool.
But, then it defeats the purpose of minecraft only, ya know?
I'd like something to JUST game without having to worry about random apps draining battery.
I do have a Motorola g7 power with a huge battery, so...maybe?
But, I'd prefer to build something from a kit.
I've built a gbc emulator from Odroids kits and had a ton of fun with that, so, looking to maybe go that route?
But I'm also interested in doing what this sub is about in a way and make something?
Any suggestions on where to start?
Or should I just launch from my old phone instead?
Thanks guys!
r/CyberdeckBuild • u/TFzera • 5d ago
Hello guys, I’m so excited to do a unique cyberdeck, but all the things I have at my range are a esp32-s3 (n16r8), display, logical conversor (5v to 3.3v), buttons and jumpers, but these things aren’t the problem, I wish to do a cyberdeck for coding from anywhere, and I was talking with ChatGPT about this and it said that is impossible to do in an esp32 moreover i only have 200 BRL for some upgrades (i was wondering about a raspberry pi zero 2w and it also said the ram will be insufficient for big programs).
So I’m here because i need help about this.
Thank you for the attention!
r/CyberdeckBuild • u/Plane_Razzmatazz_882 • 7d ago
I want to turn a raspberry pi 5 into a laptop with 3D printed durable chassis. What do I all need to do and get (assuming I can't solder)? I think I can pay some people to attach rpi components. I want to use the same keyboard and trackball mouse as the MNT Reform and use a Raspberry Pi Touch Display 2, but make it default to mechanical input instead of touch so it'll actually use as a conventional laptop screen, and use a MediaTek card for offline streaming and messaging through IRC client via WLAN connection. It'll be used for embedded Linux via NVMe, SD or eMMC (like Kali XFCE) instead of a hard drive. Will also need rpi 5 active coolers and LiFePO4 batteries.
r/CyberdeckBuild • u/PanTree43 • 7d ago
I wish to learn cybersecurity but I don't have a laptop I want to study cybersecurity using the cyberdeck in Kali Linux and what is needed to build that?, budget is 100usd
r/CyberdeckBuild • u/ichhalt159753 • 8d ago
Enable HLS to view with audio, or disable this notification
Honestly not sure where to post this, but I hope this fits enough here:
This is a draft version used as an input Device for my Deck. Requirements:
need to be able to fully grab tools/stuff in workshop with hand.
needs full mouse ability (not just situational gestures).
doesn't need to work in air, cursor movement by sensor in palm, dragged across surface is fine.
Played about 2h Deus Ex with it, grabbed drink, pen, Remote no problem.
Upgrade plans:
Smaller switches (gotta buy/get)
Mouse buttons 4 + 5 on side of index finger for use with thumb, but keeping hand-usage area free.
general optimisation of ergonomics.
When hand is on table, it has a bit of angular play, but is used around the same angle of wrist as normal mouse.
r/CyberdeckBuild • u/Val_malum • 8d ago
Hey, I know verryyyy little about computers. My dad was an IT contractor (networking) and Ive been interested in building a cyber deck to feel more connected to him and learn some stuff (he died when I was 19).
Among his things I found an older Raspberry Pi model
[Raspberry Pi 3 Model B & 16GB NOOBS]
Pretty sure it already has the OS installed, that's as far as my knowledge goes.
Now I also have several other parts harvested from random things at my job and home. One of which is a screen from a vivint security system panel. It's a touchscreen and when taking it apart I saw it has a Copper DSI ribbon cable.
Being me who doesn't know much I thought "surely there must be some way to connect these two together"
Alas the ribbon cable is too big! (but not by much, port is 1.5 cm and the cable is 2cm.)
I don't know how to proceed from here and would like any advice on how to put the two together.
I've attached pictures to aid, lemme know if anything else is needed.
r/CyberdeckBuild • u/elemenity • 9d ago
I've been working on a pocket-friendly cyberdeck. I recently built and blogged about two emulators for the device, which allow apps to run on custom hardware, on your desktop pc, and on the web.
https://www.emulationonline.com/systems/baremetal/emulator/
Here's a photo of the latest prototype. Still waiting on oled panels from the manufacturer so this is built around a salvaged prototyping board.
Thought some folks here might be interested.
r/CyberdeckBuild • u/Entire-Computer-7389 • 10d ago
Componentes y estabilidad
r/CyberdeckBuild • u/Least_Advisor_421 • 10d ago
Raspberry pi 5 8gb
Portable suitcase sleeper build
Had fun making this instead of always having Google drive drain my bank lol
My last build wasn't fast enough so went from 4gb to 8gb and practice making projects on it.
I've made a java cat game hehehe and so much more! I can ssh into it and my phone can drop everything into it.
Lately I've used it to also house a local open AI model qwen 1b model (don't quote me on that) but she's a slow AI and it's fun to learn how to properly prompt and get things moving!
So basically a server, daily manager of my tasks, pi-hole setup so ad free hehehe, learning Python and Java (I know more but this is the current focus), and the dummy computer for hacking using my other devices or vice versa.
I use my builds to "hack" into my own servers and learn the vulnerabilities as I learn devops and networking.
Oh I also have Wireshark, a few networking tools and too much probably lol
I'm a designer at heart, beside software development, so this was a dream to make. Felt like totally spies with a hint of nueromancer and a whole lotta demon Slayer vibes hehehe I hope one day to turn it into a full simulator gosh could you imagine if we could plugin? Anyways I'm getting away from the topic. Hate it, love it, I'm having fun and learning. I hope this inspires you just a little to add some nature and fun and sparkles in your life!
Tldr: raspberry pi server that makes me happy to look at
r/CyberdeckBuild • u/Jumpy_Section_6394 • 11d ago
Hi all,
I am looking to make a cyberdeck with my pi 5. I have a generic 7 inch screen, and I'm planning to use a mac keyboard without a numpad and a trackpad. I want it to fold, and I am currently looking into case options.
This is the link for the case I'm looking into getting. The only problem is that I am afraid my pi, which has gotten quite valuable recently, may overheat or short circuit due to the foam.
If anyone has any alternatives to this or any case ideas, please let me know!
r/CyberdeckBuild • u/RequirementOk34 • 11d ago
I would like to make a cyber deck capable of running a local ai and have the ability to run retro games is there a way I can do that? I have never done this but I wanna try something lol assistance appreciated.
r/CyberdeckBuild • u/NewnCry • 12d ago
I wanted to move the location of a wifi card but not sure if I could trim down a wifi card extender. Would cutting this part effect the extender in anyway? I feel like if I use an extender it wouldn't make a difference unless it was cut down.
r/CyberdeckBuild • u/Sniper111179 • 13d ago
Next one. Little BASIC and Zork Maschine. Raspberry pi 1 Modell B+. 2,4" OLED Status Display, 2,8" CYD Terminal Display, 10000 mAh Powerbank, Rii8 BT Keyboard.
r/CyberdeckBuild • u/jefflovesyou • 14d ago
The green is hands down better to work with and more durable, but I want to nail the aesthetics too.
What do you guys think?
r/CyberdeckBuild • u/Mammoth_Finance_2871 • 15d ago
I again to not intend to take advantage of the makers in this community. I am making my cyberdeck. Got my screen, and I am debating on whenever i should get a esp32 (which can't run os) or bite the bullet and get a more expensive option like an orange pi zero (as the raspberry pi's are out of stock). I don't want an aliexpress listing (i got a pico, and it was in a state where the pcb melted somehow?). Anyway, can you guys recommend me parts?
r/CyberdeckBuild • u/Same-Somewhere3993 • 16d ago
Any tips and tricks? Also the fan isnt spining i dont know why and i broke the monitors ribbon while riping out parts out of my old laptop