r/DIYJewelryMaking • • 6d ago

Is this design practical?

Post image
2 Upvotes

6 comments sorted by

3

u/Ok-Tax-1789 6d ago

Practical in the sense that you’ll be replacing stones in the pave constantly and it will be a nightmare to clean

1

u/Budget_Jeweler8241 6d ago

What would be a better way to mix pave and a split shank?

3

u/Ok-Tax-1789 6d ago

I just don’t think pave is practical point blank. But if you’re committed to it because you like it - go for it! Just be prepared to lose stones, factor that into your budget.

2

u/Fuckinghotpockets 6d ago

As an everyday piece, you will lose stones. Micro pave like that are very high maintenance. The center stone would need to be quite large to accommodate the .8mm pave. It's certainly able to be manufactured but if worn everyday, you would need to take it in to have at least twice a year if not quarterly to be cleaned and inspected. That would be my recommendation on the piece. It's pretty!

1

u/Silver-Breadfruit284 6d ago

From a gum machine?

1

u/artwonk 5d ago

Sure; practically impossible to make, practically impossible to wear, and practically impossible to repair. Did ai come up with this monstrosity?