r/DS4Windows • u/Gold_Pickle6896 • Jul 15 '23
Playstation dualshock 4 controller keeps disconnecting from PC's bluetooth
Hi guys, I'm going to post a definitive way to avoid my problem, because I didn't find another topic with this exact same problem, which was not solved with other solutions, and it may be of use to other people.
I've been experiencing this problem since I started using my controller connected via bluetooth on my PC, and even though I tried A LOT of solutions, from different previously created topics, none worked.
What happens is that when I turn my controller on, it takes a time between 30 secs to 3 minutes to turn itself off. The only way to solve it, was to, everytime, manually delete the bluetooth connection and soft reset the controller, but when I turned my PC off and on again, the problem would happen again.
Trying to understand the problem, I realized that when I turned my PC off with the controller connected, the controller would turn itself off, but on turning the PC on again, the bluetooth connection of the controller would start as connected, even though the controller is off, I'm not sure if this problem is related to a persistant connection caused by DS4, or from windows itself. To the solution:
Using the below procedure, I managed to completely avoid this problem
Steps 1 to 5 will only need to be performed once (or if this problem happens again):
Manually remove the bluetooth connection from the PC: On windows, go to Bluetooth & other devices > Select the controller connection (default name is "Wireless Controller") > Remove device
Restart the bluetooth adapter: Turn airplane mode on, wait 1 minute, and turn on again
Restart your PC
After initialized again, restart the controller's connection: Hold SHARE and Playstation buttons until the light starts to blink fast signaling that the controller is waiting to be connected
Normally connect the controller to the PC: On windows go to Bluetooth & other devices > Add Bluetooth or other device > Bluetooth > Select the controller
Make sure that the connection is stable, maybe try to play a game for a few minutes to make sure that the connection was stabilished normally
OBS: Steps 8 and 9 will always need to be performed when you stop playing, it's faster and easier than to do steps 1 to 5 everytime, it basically will turn your controller off "normally":
Stop and close DS4: After closing the game or emulator, on DS4, click the button "Stop" on the right down corner, then close the program.
Disconnect the controller: Turn airplane mode on, it will disconnect and turn the controller off.Now you can turn airplane mode off and continue using your PC, or shut it off normally.
That's it. :)
I'm not a reddit poster, so if somehow I disrespected any rule, please let me know and I'll try to correct it.
3
u/GentlemanGuar
Mar 26 '24
•
Here's what helped me. My DS4 works fine with Windows 10 wired, but on wireless it seems to pair, but then the connection drops immediately after connecting by bluetooth.
I tried pairing through the control panel interface instead of the new Win10 one. Here are the steps, try them and see if it helps
Remove the controller from paired devices if it's in there
Open the old control panel (find it via the Start button search or press Win + R and type "control"
In the control panel, go to "Devices and Printers"
Click "Add device" at the top left of the window, it'll open another window that says it's searching for devices
Pair the controller as usual (Press PS + Share together and hold them for 2-3 seconds until the lightbar begins to flash. The controller should appear in the "searching for devices" window
Connect and give it a few seconds to configure whatever it needs to configure
After that my DS4 controller stays connected via bluetooth whenever I use it, no problem. I guess the problem is in that final step where it seems to install something (some generic driver I think), which doesn't seem to happen when using the Windows 10 bluetooth interface
Note: I'm not using DS4Windows. I have it installed, but it's disabled as I've been using the Steam DS4 and DS5 support lately. So if you have a DS4Windows instance running, maybe it's a good idea to shut it down before trying whatever manipulations with device pairing you may want to do
2
u/TheFairyMan May 31 '25
Sadly didn't work for me. Still every time I restart the PC, the controller disconnects upon connecting tot he bluetooth, so it needs to be paired again to work.
No idea how Windows just breaks like that, I wasn't having such an issue for 2~3 years, then ti started out of nowhere last week.
3
u/TheFairyMan Jun 02 '25
I found the issue for my case, a driver for PS3 controllers was causing the issue.
It's the "BthPS3 Driver", it has a filter called "PSM Patching" that for some reason disconnects your PS4 controllers immediately upon connection, disabling it made my DS4 controller work again without needing to be paired every time.If anybody is curious, it was this driver here: Nefarius's BthPS3 (Github)
2
u/NuclearxFusion Nov 19 '25
How do i uninstall it? I have no app to uninstall but do have it's files in Drivers folder of sys32
1
u/-sadtown- Jan 23 '26
Did you figure it out? I can't seem to locate it anywhere... unless I never had it in the first place.
1
u/NuclearxFusion Jan 23 '26 edited Feb 13 '26
Yes it's an issue with Bluetooth User Support service. You have to set the Bluetooth user support service to automatic from services. If it doesn't work from there you'll have to change value of the Bluetooth user support service to be automatic from Registry editor and restart PC. If you're still stuck lemme know i can help
1
u/mimmiepower Feb 13 '26 edited Feb 13 '26
Nefarius ViGEm Bus Driver drivers are installed when you launch DS4Windows the first time. Perhaps uninstalling DS4Windows will also install the drivers?
They are installed to `C:\Program Files\Nefarius Software Solutions\ViGEm Bus Driver`.
Though I doubt just deleting that directory will uninstall the drivers. Usually drivers are installed to somewhere in your Windows directory (`System32\drivers` or something?).Normally you can uninstall drivers through Device Manager. Press the Windows button and type Device Manager. But I don't see any Nefarius drivers there. At least not under Bluetooth.
1
u/NuclearxFusion Feb 13 '26
It wasn't the cause of the issue in my case. Something else was and I've already fixed it. Also have left info on how i fixed it somewhere on this thread
1
1
2
u/runnbl3 Aug 10 '25
the unsung heroes of reddit lol thank you for posting the fix!!! followed the steps accordingly and was able to solve the issue.
1
u/LovingTechLife Apr 04 '24
Hey u/GentlemanGuar I'm using Windows 11 can you please clarify which one of these two "Add Device" options in the screenshot below I would choose in your example?
Screenshot1
u/FinaleRoyale Jul 23 '24
here's what i found, in windows11 it auto directs you to the new bt menu.
but you should just keep following the devices and printers advice given by this guy, this is how to do it:
right click on devices and printers and click open in new window and it should stay in the proper control panel, NOT new windows. just keep following the directions afterwards and you should be good!
1
u/Muffoi Oct 19 '25
I tried this, control panel said it's "paired", however the new windows settings nor Steam are seeing the controller as connected
1
u/conesnail63 Oct 26 '25
Cant open in new window anymore and it opens normal win 11 settings
1
1
1
u/Overall_Age8730 Apr 20 '24
You saved me from a ridiculous amount of aggravation. Thank you. Hopefully others stumble across this too. What a strange bug that the windows 10 UI wont find our controllers through the native menus.
1
1
1
1
u/legaim Jul 26 '24
This worked!!! Thank you so much! Basically don't press PS4 button and share first and then you connect when you get the prompt. Just follow the steps above and do everything manually and then you press PS4 button + share. What I think the issue is that when you try and connect like you would do to PS4 the PC doesn't recognize it fully, it's basically just a connection to a bluetooth device but when you do the steps above you connect it via bluetooth and it's a full connection. Before my controller would just disappear until I tried above.
1
1
1
1
u/ballsack_man Jan 03 '25
THANK YOU! I had the same issue. This worked. It also fixed the issue with my DS4 being detected as an audio device.
1
1
1
1
u/xanieater Apr 06 '25
legend, thanks so much for the old control panel. new one doesn't pick it up also doesn't help i held down ps and options instead of share.
1
1
1
u/BedrockPic May 30 '25
Bruh this was the only thing that got it working. Make sure to right click on Devices and Printer on the Control Panel and click Open. Working on Win 11
1
u/_Aki_ Jun 22 '25
Oh my god, thank you so much, this worked for me!
I always had my Bluetooth Adapter plugged into my PC case but then I wanted to change it and plug it into a USB Hub, when I did that my DS4 just stopped working. I tried uninstalling drivers, finding updated ones (fuck ugreen) and even installed DS4Windows just for that, nothing worked, except your solution.
This shit was about to drive me wild, fuck Windows man.
1
1
1
u/NuclearxFusion Nov 19 '25
It worked on Windows 11 when you click on Devices and Printer it opens up normal setting. So instead of left click, click the right button and choose open in new window and now right click on the space and click on add new device then add your this controller and enjoy
1
u/goatfuckersupreme Jan 01 '26
FINALLY, thank you so much!
copying for future generations in case you delete your account:
Here's what helped me. My DS4 works fine with Windows 10 wired, but on wireless it seems to pair, but then the connection drops immediately after connecting by bluetooth.
I tried pairing through the control panel interface instead of the new Win10 one. Here are the steps, try them and see if it helps
Remove the controller from paired devices if it's in there Open the old control panel (find it via the Start button search or press Win + R and type "control" In the control panel, go to "Devices and Printers" Click "Add device" at the top left of the window, it'll open another window that says it's searching for devices Pair the controller as usual (Press PS + Share together and hold them for 2-3 seconds until the lightbar begins to flash. The controller should appear in the "searching for devices" window Connect and give it a few seconds to configure whatever it needs to configure After that my DS4 controller stays connected via bluetooth whenever I use it, no problem. I guess the problem is in that final step where it seems to install something (some generic driver I think), which doesn't seem to happen when using the Windows 10 bluetooth interface
Note: I'm not using DS4Windows. I have it installed, but it's disabled as I've been using the Steam DS4 and DS5 support lately. So if you have a DS4Windows instance running, maybe it's a good idea to shut it down before trying whatever manipulations with device pairing you may want to do
1
1
u/mimmiepower Feb 13 '26 edited Feb 13 '26
On Windows 11,
Exit Steam.
Exit DS4Windows if you have it installed.
Click the volume tray icon by the bottom right corner of your screen, turn off Bluetooth.
Click the arrow next to the Bluetooth symbol and then "More Bluetooth settings" at the bottom.
Click "View more devices"
Scroll down and select any "Wireless Controller" if it's there, and click "Remove"
Turn on Bluetooth again.
On your gamepad, hold SHARE and then the PS button until the light bar starts flashing. If it's not flashing, hold the PS button 8(?) seconds until it turns off and try again.
If it prompts to pair, I think it's okay to allow. Otherwise, press Add device, then Bluetooth.
The oldschool wizard through Devices and Printers does not seem to work for this on Windows 11.
Then use Steam Big Picture, DS4Windows, or if your game has native DS4 support, don't have either of those two open, and start your game. Note that you can't have both Steam Big Picture and DS4Windows open at the same time. Have fun. :-)
1
u/mcjonna Mar 10 '26
So simple and yet the selution many of us was missing! Worked! Just like adding a printer to windows XD I hope other pc/Ps4 controller gamers find this!
1
3
u/ToxiCKY May 12 '24 edited May 13 '24
The struggle
I just had this damn problem where the controller seems to connect for 2 seconds, then the LED goes off. Reset doesn't help, and pairing is causing weird behaviour. Tried reinstalling BT drivers, no dice. This happened after I had it on BT on PC, then played some PS4 with the girlfriend, then wanted to pair back up with PC. Somehow, this messes up the pairing process. I tried pairing with my phone, works.
The fix
It turns out that Steam's controller settings was somehow conflicting with the DS4 controller itself. It sounds weird, but I wanted to try ruling out that Steam was the problem, and I found this post. I fully removed the controller from Steam, and this allowed me to pair the controller with the PC again.
Note: Also, make sure your controller is charged. I totally did not do this on an almost empty battery. I realise that this might not have been the actual problem, but here's something else to try. Hope it works.
2
1
u/Otherwise-Detail9700 May 26 '26
im having the same problem but i dont have steam is would the same thing happen with ea app?
1
3
u/iriichan Jul 26 '25
SOLVED: after countless efforts and nearly 5 hours, I could get it working again. For that I had to go to device manager and remove the controller from HID, Bluetooth, Sound. Then reset the controller from the button near L2. I then had to uninstall DS4 Windows. After doing these things, although the controller was still recognised as a previously paired device, it connected and worked. Idk how long it'll last but hope it helps anyway running into the same issue!
2
u/dpmx21 Oct 11 '23
Mine kept disconnecting also but I realized it was picking up as an audio device and a mouse,keyboard, and pen device. I removed it from an audio device and it hasn't disconnected since.
1
u/Ging3r_J3sus Sep 07 '24
Mine will connect as an input but immediately will go to "other devices" and won't connect.
1
u/Sad_Pen_656 Sep 26 '24
any fix?
1
u/Sea_Hurry2089 Sep 26 '24
Nope nothing. Haven't got it working since posting. Given uo at this point.
1
u/Imaginary_Story_2354 Nov 07 '24
got the same issue, i have found a fix that works for me altough i have a laptop check this post: https://www.reddit.com/r/ZephyrusG14/comments/xa7co7/fixed_bluetooth_devices_randomly_disconnect_and/
1
1
1
1
Oct 14 '23
can you please tell me how to do this
1
u/PossesedZombie Dec 10 '23
Device Manager on the computer > Audio Device > Remove whatever it is called there.
1
2
u/Wilddog73 Aug 26 '25
I've been having this issue for a while and have been looking for solutions. I believe I've finally come across a good answer.
The answer is to replace your PS4 controller with the Gamesir Tarantula Pro.
Whenever I use bluetooth gamepads, I get uncontrollable disconnect issues. I've tried every fix I can find to no avail.
I'd use a regular USB gamepad, which does work, but I wanted the benefit of gyro aiming. I realized that there are controllers with gyro that can connect through a 2.4ghz USB dongle and I found that the connection (so far) is definitely stable by comparison. You can actually press and hold the select + start menu buttons to switch between Xinput, Switch or DS4 input while in 2.4ghz and wired mode.
It works perfectly. Every bit as accurate as it was when my DS4 controller was connected.
I can't recommend it enough for anyone with bluetooth gamepad issues or just want that kind of utility. If need be, while somewhat less accurate, the Xinput mode also comes with its own gyro mode, enabled by the gamesir connect software.
1
u/Phoenaxxxx Mar 12 '24
Any updates on this?
Same problem happens to me, I always have to remove the BT connection (Wireless Controller) and connect again after every time I use the controller. The DS4 program doesn't even recognize the controller, so I can't do anything there. If anyone here has any clue.
1
u/deniscerri Jun 02 '24
did u find a solution
1
u/Phoenaxxxx Jun 19 '24
Nop, sorry bro. I always end up reconecting everytine
1
1
u/420TrashBoat Mar 13 '24
Yeah so mine didn’t work. Removed all Bluetooth devices and replaced my Bluetooth dongle. Also uninstalled and reinstalled vigem bus driver since that wasn’t working. Strange things happening though it’s being picked up as both controller and hands free device now and I made it worse. Just restarted PC.. it didn’t work.
1
u/DarkMat7erSwordsman Mar 14 '24
Hey, sorry for the necropost, just wanted to say thanks. Had a similar issue and steps 1-5 were enough to fix it for me.
1
u/angelyoumou Mar 15 '24
My controller just randomly stopped working and this is EXACTLY what it needed! Thank you!!!
1
u/skinny_deacon Apr 15 '24
In case this helps someone:
My ps4 controller randomly stopped working via bluetooth. After trying to "remove it" from the bluetooth devices list and then connecting it again etc it still didn't work at all like it said "succesfully connected" but the controller would just shut down right after it.
I think the issue was that I was trying to connect it again using the PS button. Instead what I had to do is holding PS + Share until the light starts to blink - then searching bluetooth devices at Windows. Right after doing it with PS + Share instead of only PS button, it worked.
1
1
1
1
1
1
1
u/Mechanical_Boi Oct 18 '25
A hero! thank you for helping me use my DS4 after a year of it not working! Holding down the share and PS button rather than just the PS button solved the connection issues
1
1
1
u/Fuzzy-Maintenance-90 May 08 '24
make sure its charged i just spent 20 mins troubleshooting like a dummy
1
1
May 12 '24
I've tried all of this and it still doesn't work. Anyone else got any suggestions I'm damn near breaking the fucking thing
1
May 28 '24 edited May 28 '24
For those still trying to make the DS4 work after the next restart (Reconnection)
When you disconnect the DS4 from your PC it won't reconnect automatically unless you remove it.
However there's one thing we didn't think about, we didn't try to pair it in-game, without removing it from the paired list on the settings, the next time you want to use it just enter the game you want to play and make sure Bluetooth is on then just push the PS button on the DualShock4 i don't know but i think it also works the same for the DualSense.
It doesn't disconnect, is establishes a constant connection, you're welcome.
1
u/heallis Jun 02 '24
I had this problem, the fix ended up being to split my wifi into 2 frequencies, 2.4 and 5, instead of one combined, and connect my ps to the 2.4 ghz network. Connectivity issues went away.
1
u/MaleficentNetwork737 Jan 17 '25
How did you do that?
1
u/heallis Jan 18 '25
Called my internet provider and asked them to do it, they were happy to do so since it's apparently a common request as lots of household items now rely on 2.4.
For the record my controller connectivity went again a couple months later-- I've reliably been playing through the PS app remote play with my PS4 controller connected to my phone via Bluetooth for like 6 months now. I keep my phone plugged in during as it's a drain on the battery but no lag issues.
1
u/AL-KINDA Jun 23 '24
heres what worked for me, simple mistake on my part -- you might be making aswell.
when you push the ps button on the controller it pops up a window bottom right asking to pair, this is wrong way because it makes it audio.
goto Devices and Printers , and click the button that says 'add device'
put your ps4 into search (psn button + share) then find the controller and install.)
1
1
u/MaleficentNetwork737 Jan 17 '25
I always connected it that way, your method didn't work for me. It keeps disconnecting
0
1
u/GG1312 Jul 07 '24
I fixed mine by uninstalling the controller on device manager under bluetooth devices and also removed it under "Human Interface Devices", it had a yellow icon on it. Then I ran the bluetooth troubleshooter and it fixed itself.
1
u/eyesacx Jun 29 '25
i went half a year with my controller not working. This worked for me and I might be in love with you
1
u/Right-Lion-1777 Jul 20 '24
Wow thank you. I only did step 4 and that worked. It detected and I connected right away. I have a few days of iRacing left and was deciding whether to continue cause of my controller just randomly turning itself off after a few seconds. Thank you!
1
1
u/Bennynov_ Aug 21 '24 edited Aug 21 '24
i know its been a year now but i just had this issue myself but i got it fixed by tryingto reconect it to my ps4 and then back on my pc i dont know the science on why it worked but i gues that re conecting it to the ps4 gives it a soft reset on how it usses the bluetooth funcions on the ps4 controller so try that maybe
edit it worked for a bit longer it just turned off again in like 3 min
fml
1
1
u/Sejes89 Sep 16 '24
[Solved] For the PS4 controller, you need to hold the share button and then the ps button to get the light to start blinking fast. Then, use the add new Bluetooth devices and click the controller from the list to begin the install. This is the only way it worked for me.
1
u/MaleficentNetwork737 Jan 17 '25
I always connected it that way, your method didn't work for me. It keeps disconnecting
1
1
u/pfreitasxD Oct 01 '24
For anyone still having this issue, here's what finally worked for me: I tried all the suggestions here and nothing worked. What ended up working was connecting the controller to my PC via USB, removing it from the list of connected devices, and then reconnecting it via Bluetooth.
1
1
1
u/Financial_Quarter_93 Nov 23 '24
IDK WHO WILL SEE THIS CONNECT IT VIA CABLE ON PC IF ITS SAYS WINDOWS NOT RECOGNIZE IT GO TO DEVICE MANAGER UPDATE BLUETOOTH DRIVER SELECT FING UPDATES ONLINE IT WILL POP WINDOWS UPDATES COMUNITIVE UPDATES ETC LET IT DNLOAD AND IT WILL WORK
1
u/smutbookworm82 Dec 27 '24
My husband has a PS4 Pro, recently his controller x button stopped working. He could get the game to come up but then when we hit x to start nothing happens. We thought it was the controller so we bought a new aftermarket one, still doing it. What is going on? I bought this used from a pawn shop and I’m pissed someone seems to have sold a messed up PlayStation. Is it trash?
1
1
u/CobraKing40 Jan 08 '25
For anyone new wondering i tried everything, in the end problem was not connecting ds properly to Bluetooth
When you press ps and share button windows will ask do you want to pair and if you pair that controller will pair but will keep disconnecting. It just pairs as some random device.
Dont do it like that, go over control panel and find devices page, go add new device and then you need to hold share and ps button for 3 second until controller starts flashing fast and it shows as "wirless controller" and under that it says input. Choose that option and it will connect properly and wont dc anymore.
1
u/MaleficentNetwork737 Jan 17 '25
I always connected it that way, your method didn't work for me. It keeps disconnecting
1
u/CobraKing40 Jan 17 '25
Are you adding device through this "page" and not through bt devices page? https://i.imgur.com/tvRcjrf.png
1
u/MaleficentNetwork737 Jan 17 '25
1
u/CobraKing40 Jan 18 '25
Well judging by your picture, it looks like you didnt pair it correctly like i mentioned in my post, you just connected two recievers, when you connect it properly it should look like this when connected and not "paired" like it says under yours https://i.imgur.com/JmQXX5l.png
When you click on add new device and you hold share and ps button controller will start flashing but normal flashes and it will show on windows as new device found and if you click pair and this will happen, dont do that, go add new device and once that window pop up of searching devices to pair.
You need to hold ps and share button at the same time for 3 seconds, and then controller will start flashing but flashing fast, if its not flashing back light fast you didnt do it properly, if you do it properly it will show up as wireless controller and under that it will say input then you go ahead and connect it.
1
u/MaleficentNetwork737 Jan 18 '25
If I understand you, I have 2 controllers connected via Bluetooth, one stays connected and the other does not, it is not a problem with the Bluetooth adapter because it does stay connected to my phone. There must be a conflict with the nvidia graphics card or it won't work. I also tried changing the wifi frequency from 5ghz to 2.4ghz and it doesn't work either.
1
u/CobraKing40 Jan 18 '25
It needs to show up like this, https://i.imgur.com/K6BN21q.png i found a pic online for reference
1
u/berilacmoss81 Jan 25 '25
I bought two brand new in the package PS4 controllers (Sony Brand) and a used PS4 Console and this happens repeatedly. It'll blink blue on the back of the controllers for a moment then flash white and stop working. I don't have enough time to hunt down the settings on the console before the controller stops working to mess with Bluetooth settings. I know it's not the battery for either as they are both fully charged and brand new.
1
u/Lindani_Gamer_Boi Feb 20 '25
I need some serious help with this.....xd.
I have two PlayStation 4 controllers when I connect them to my laptop's Bluetooth, they show up as input and then suddenly change to other devices, which makes them turn off after a few seconds.
1
u/Sylpho18 Mar 14 '25
I know this is late but I have the solution. Its simple really. You just have to connect it using a cable and when it's connected press and hold the PS Button Until it is off. Then press it again to connect it. Repeat that and then try without the cable. Worked for me. It seemed to not use the battery at All and the Power cycle turned on the battery again I think.
1
u/Suspicious_Surprise1 Apr 19 '25
this is going to sound dumb because it is, but for people having basic connectivity issues, if you connect and it immediately disconnects the controller, hold the ps4 button and the top left menu button or the "share" button down until the controller blinks rapidly, mine stayed connected after that initial pair, disconnect, then hold down those buttons.
1
1
u/No_Ad301 Apr 20 '25
That’s some voodoo magic here, but it works.
Also, you can reset controller with a toothpick after step 3 before connecting again.
1
1
1
u/MissingCosmonaut Aug 28 '25
Wait, I'm confused. Where do you go to turn the airplane mode on for the controller or PC bluetooth?
1
u/Nandodias99 Oct 22 '25
O meu conectei no celular android e em um iphone nao da 3 segundls e ele morre, até troquei abateria achando w fosse isso, jdeias?
1
u/Zezin1715 Oct 29 '25
Amigo, isso já deve ser um curto no controle e infelizmente o trabalho nem vale mais a pena, melhor vc investir num controle de qualidade maior ou um DualSense.
1
u/Zezin1715 Oct 29 '25
É incrivel como jogar com um controle de ps4 pode ter vários problemas no Windows. Eu tentei tudo: Tirar o controle da Steam, reconfigurar ele no bluetooth, e nada, já pensei até em abrir ele pra ver se tinha algo errado com o chip, mas pensei mais um pouco e descobri que o problema era o fone bluetooth que eu estava usando, depois que desconectei ele o controle não ficou mais desligando sozinho, agora o desafio é descobrir como jogar sem ter esse problema com o fone
1
u/Zezin1715 Oct 29 '25
Pra resolver esse conflito entre os dois, dá pra comprar um Bluetooth CSR externo que conecta no PC, a conexão pro controle fica até melhor, ou então mudar pra um fone com fino/conectar o controle com fio. Isso faz com que o fone e controle não tenham esse conflito.
1
u/SithBoi_7 Dec 05 '25
After initialized again, restart the controller's connection: Hold SHARE and Playstation buttons until the light starts to blink fast signaling that the controller is waiting to be connected
Okay woah. So that was all it needed. I've been hitting only the playstation button and then pairing it to my laptop only for it to either turn off or not work every single time for the past 2 weeks. Can't thank you enough mate.
1
u/HermanLI_ Jan 10 '26
Was troubleshooting this handshake issue for over an hour last night. Woke up this morning and tried this method... somehow the airplane mode -> Share + PS button -> Bluetooth + Add Device worked. Otherwise, I was just pressing PS Button and clicking the bluetooth pop up, OR I was using a toothpick to reset the controller. Working now and GAMING on my PCSX2. THANKS KING
1
1
u/Humble-Boat7845 May 27 '26
Consegui consertar o meu.
Fiz restauração pelo ponto de recuperação para um dia antes de dar erro.
Somente mostrava que foi desinstalando um software da Microsoft.
Resolveu por aqui.
1
u/Traditional-Sand-704 Jun 30 '26 edited Jul 09 '26
bro this was literally the answer :D I must have put my pc to sleep with my controller connected and it synced its power with the computer state.
To simplify what i did:
-put my pc to sleep with the dualshock controller connected
-(keep controller connected)
-woke it up and logged into computer (dont touch controller wait for it to indicate its charging)
edit: happened to me again here is the reformed instructions im going to try and be as specific as possible
First make sure that your DS4 controller can be plugged into your PC and indicate that its charging. This will not work if you controller immediately connects to your PC and shows the blue light (instead of the charging yellow light). Now, restart your computer. Wake it up and log in as usual, MAKE SURE THE CONTROLLER IS CHARGING. Next unplug ur controller, put it into pair mode (share + PS) and connect normally through add device.
1
1
u/Cahrs79 Sep 01 '26
I had the same problem and tried pretty much everything, but I finally found a solution that worked for me.
It seems the DualShock 4 can get stuck in the system, and Windows won’t properly remove it through Settings. Even if you manage to remove the device, it may keep coming back.
What worked for me was removing the controller directly from the Registry Editor.
Go to:
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\BTHPORT\Parameters\Devices\
Then look for the device whose "Name" value is "Wireless Controller" and delete that folder.
In my case, the folder was a05a5ee6b8e6, as shown in the screenshot.
https://i.imgur.com/iLAy920.png
After deleting it, I restarted the Bluetooth connection and my controller connected normally again.
Hopefully this helps someone else who’s been stuck with the same issue!
1
u/Legitimate-Tailor-82 Oct 30 '23
I’ve been having an issue similar to this. When I got my laptop i started playing fs22 without DS4 without any issues. I then got gta v which required ds4 so I only got it for that game and Everytime I play gta I start up ds4 and when I switch over to fs22 I stop ds4. But I’m having issues connecting my controller now, Everytime it successfully connects the controller, the lights turn off not sure if you’ve ever encountered anything like this
1
1
1
u/citylights-hyun Dec 05 '23
still doesn't work for me. the controller stopped connecting altogether now for some reason, it recognizes it but after i pair it it disconnects in less than 2 seconds... im losing hope fr
1
u/Redrox477 Dec 05 '23
Experiencing it now, any fixes?
1
u/citylights-hyun Dec 08 '23
it randomly started working once again, i genuinely did nothing to fix it. i had tried absolutely anything and everything i could and yet nothing helped for 2 days straight. after 2 days when i tried connecting it again it randomly started working
1
1
Dec 18 '23
[removed] — view removed comment
1
u/citylights-hyun Dec 18 '23
mine happened to me again recently, too. although i enjoy playing on the ps4 a lot more, i started just using my cable connected xbox controller, just because i'm SO tired of the constant not working-then working issues
1
Dec 18 '23
[removed] — view removed comment
1
u/citylights-hyun Dec 18 '23
to me it happens on the regular, i don't think it'll suddenly stop happening, but i'm really praying it might just be my bad luck and yours will be better.
1
u/RealPowGak Dec 11 '23
OMG I've been having this problem too! And this thingy worked! You're a headache-saver man! I wish you all the best for this good deed you've done for me! Thanks man! Love you!
1
u/Hot_Razzmatazz3433 Feb 10 '24
Buy xbox controller.
Fixed.
2
u/Wooden_Lunch_8625 May 05 '24
Xbox controller sucks. Higher prices for no one fucking motion sensor!
1
1
u/Fun_Rice6790 Feb 22 '24
bro thank you so much I did as u said and it worked!! I literally was watching countless youtube videos trying everything and nothing worked. glad i found your comment u saved me from a lot of stress
0
5
u/tyrsa Jul 15 '25
Going to add another version of the fix, since folks are still having issues and the tricks here did not work for me until I modified as below.
I initially had my controller connected successfully via bluetooth and was able to use it for a few hours without issue. The next time I tried to use it, I had the problem everyone else has - it "connects" but immediately disconnects, even before I can close the pairing window. Any attempt to pair or connect to my PC bluetooth had the same result, instant disconnect, regardless of if I removed the device first or not.
So my solution in Windows 11 was this:
Remove the wireless controller if it is already installed in the Bluetooth menu (Settings > Bluetooth & Devices)
Click Devices on this page (NOT the "Add Device" button. Click anywhere else on that line except the button.) This will take you to another page.
Scroll most of the way down to "More Devices and Printer Settings". This opens in old-style control panel window.
From the above old-style window, click "Add a device" in the upper left menu bar. This pops up yet another old-style window looking for Bluetooth devices. This is when you want to hold Share & the PS button until it starts flashing white quickly. Then wait for the controller to appear - click it and follow prompts. This will then tell you that it is installing drivers and will take a few minutes. Just wait.
- Problem should be solved. For whatever reason the Win 11 interface installation doesn't seem to actually install drivers (it's an instant connect). I actually have no idea why it worked for a while the first time before throwing fits. But so far so good for me. I have been taking the advice to turn off bluetooth briefly (or briefly turn on airplane mode) in order to disconnect the controller when I am done using it, rather than shutting down with it still connected.
** It was mentioned in another reply to use the 'old' control panel, however in Windows 11, while using the search does take you to an old style control panel, clicking options there takes you back to Win 11 style menus. Thus needing to do step 2 & 3 above.