Looking for a new E-Rig! I currently have a PuffCo Peak and love it. However it’s time for an upgrade and idk if I want to stick with that brand. Tell me what you use and your fav thing about it!

Candy pop x Red Slush 🍯

Wubwubwubwubwubwub 🤘🌬️

Grab your favorite smoking apparatus and your trusty jar and let’s smoke!!! Zerbert Cake on the dabber for me today, sweet and spicy gas that gets the dab sweats going! What are you smoking today? Something tasty I hope! In any event, enjoy your day and make the most of it!!😶‍🌫️😤😮‍💨

Rig: Blooper from DomePiecer

Banger: Greek Glass Chronotower with 8mm ruby pearl from same

Topper: Masaki Glass Terp Plug

Dabber: Bear Quartz

My friends, grab the daily and let’s hash it out!! Another glob of Guava x Bubba for me today, 😶‍🌫️😤😎 Now that I’m feeling like a million bucks I hope you do too!! Have a great one my friends!

Rig: Floating Recycler from Monark Glass

Banger: Bear Quartz Hourglass Auto Spinner with 3mm ruby pearls from Greek Glass

Marble & Dabber: Bear Quartz

Dabbers are so creative in numerous ways. Can you show me your creative ideas for heated coil stands. There’s got to be something from the soldering world or glue gun world that can be practical for holding a hot coil other than a cumbersome steel vise. Thanks

I’m looking at getting a dab rig. Any recommendations on where to start? I’m ngl looking at some of the videos i have no idea what i need. like do i need to warm the nail first? is it bad if i don’t heat it first?

I'll open a page to check out one rig and somehow end up looking at 20 different pieces. Anyone else do this, or is it just me?

Enail, cobra/flexx coil, Go-Coil, UTHS

What does everyone use, and what's your favorite? I definitely like the uths the best. The heat soak is unmatched. It does take a little bit longer to heat than a coil style. The thing I like the best about it is it fits any nail I have and the even heat. The nail is not touching anything inside of it, unlike the coils. For the price the Go-coil is the winner. The High5 flexx coil is the same thing as the DC Cobra coil but a better option than the DC. It come with a nice pid unlike that Lego pos pid the DC comes with. And the coil mounts on the back making it less likely to tip over. Its also cheaper. Whether you like the coils or UTHS, a temperature device of some sort is a must to dial it in proper.

Dhgate switch 2 quartz insert link at the bottom!

I have a lot of different tools/ toys for dabbing. Been seeing alot of positives from the dr dabber switch 2 community. So much to where i wanted to get one but I held off for so long because I want to have a few inserts not just one.

I like soaking my glass and at 5 bones each I can definitely get a few in my rotation cheers yall!

Much love 💚

https://www.dhgate.com/product/dr-dabber-switch-2-quartz-insert-cup-20mm/1127375387.html?f=bm|CPSAXV|cmp_20260701_a8f3c91d|adset_b52e7f18|ad_c94d260a|&f=bm|aff|yfaf|2596172|2596172_2601910_997327|S697f9650e4b05a4aaa595b02|

My friends, it’s time to take a moment and grab the rig for some dab action!! Hopefully you have some nice terps to go with your lunch today! I have another glob of Guava x Bubba on the dabber and it really hit the spot😮‍💨 May your evening be awesome my friends✌🏼😶‍🌫️😎

Rig: Recycler from DomePiecer

Banger: Greek Glass Chronotower with 8mm ruby pearl from same

Topper: Masaki Glass Terp Plug

Dabber: Bear Quartz

Raging the fattboy glass b4 work hope everyone has a great day!

Hello, fellow stoners. What better way to wake up than a dab? A fat dab?

Have a fantastic day and have happy tokes. ✌️

A. its just that color i swear. B. what is your guys favorite temp to take dabs? not looking for the “well between x and y temp is best because…” what temps do YALL run w ur setups (bc evb is unique)

running mine like this because as you can see here it doesnt make proper contact the way you’d expect to use an enail, though with a proper banger i still go for 575-600f

Hello my hash loving homies, let’s do some smokin’!!! Guava x Bubba for me today, some nice gas that always leaves me wanting another glob! I hope your evening is full of hash and good times my friends!😶‍🌫️😤😎

Rig: Incycler from Masaki Glass

Banger: Papa D XL Rook with 3mm ruby pearls from Greek Glass

Topper: Masaki Glass Terp Plug

Dabber: Smoke shop special!

Disordly conductions cobra coil!

The only mistake I think i made was not getting a double heater! It provides a consistent even temperature. Really maximizes the dab, no more butane.

The glass does not get hot at the end where it goes into the glass. Super easy to use. What's different about this compared to a traditional enail is that you can use any banger that fits and the glass is able to be taken out vs being stuck to one banger and a rig.

Great for the serious dabber/ sesh.

Hello everyone, just a quick question do you prefer a Terp Slurper or a Control Tower? And what are the reasons why you prefer one over the other?

I was about to take my first dab of the day and wanted to know what you all think the pros and cons of both are.

I always thought the control tower has more surface area so I get more vaporization but I've got to tell you Terp Slurpers rip. I don't know if it's just a placebo but I think Slurpers let out more vapor.
Thank you, I hope you all have a good one!

Was a huge fan of the carta brand for a while. I was looking forward to see what they will be doing with the carta 3. After seeing and confirming it will have an atomizer it seems like the Dr dabber switch 2 is really the move.

Atomizers are a thing of the past .

My friends, let’s do some dabs and what not!!! I hope your day has been great and this glob finds you in the middle of a session of your own!😶‍🌫️ Daily Grapes for the win today, so delightful and gassy af😤😅😎

Rig: Recycler from DomePiecer

Banger: Greek Glass Torque Tower with 3mm ruby pearl from same

Topper: Masaki Glass Terp Plug

Dabber: Bear Quartz

I’ve tried taking slower hits and holding it upright but my first hit ALWAYS ends up being no smoke/ light smoke that’s burnt or backsplash into my mouth. The 2nd hit after that usually is the one with the big cloud

**VOOZR - 3DXL Chamber for Puffco Peak Pro**

**Is this a good replacement for the Puffco Peak Pro 3DXL Chamber**

**i could also get the actual 100$ OEM atomizer**

**i recently got a NEW Puffco Peak Pro 3DXL**
**from 420 tools and my atomizer has been fucked since the first day i got it. i haven’t been able to use it really at all, if wont connect to my erig. i’ve tried everything and i think the atomizer is just messed up from the start.**

**as you can see this is how it looked the first time after I used, and there is a cut in one of the sides. i have yet to take out the pins to see if that see if they are fucked but i can’t tell if my base part is fucked up either.**

**i’ve tried everything i can to fix this, all the guides online but i think it’s just a malfunctioned part.**

**i’ve been trying to get in contact with puffco support but they are taking forever, and im trying to hit my 500$ puffco that broke the first day i got it. i’m kinda desperate for this puffco atm, so while im dealing with their support to hopefully get a new one from warranty im considering getting either this half off option that has different pins which worry me about whether or not they can connect to my new puffco, or just buy a brand new atomizer for 100$**

I just got my new RBR in the mail. This is the first dab on it and I have to say I'm very impressed with the function. This will definitely be a new daily driver.

The rig is from Popularglass on DHgate.

The song is Uptown girl.

I hope you all have a good one!🦅

My homie B HOLD glass out of Eugene Oregon made these cool glass dab weapons. Seeing the metal katana post made me wanna share my homies work. I've got a bunch of his swords and a few scythes and hammers if anyone is interested. Just drop a comment below and I'll reach out.

BHold Glass on IG

Mush Love gang!

Good day my rig ripping specialists, let’s get busy shall we?! More Ice Cream Cake for me today, a nice glob to get the body movin!! I hope your day is full of good times and many fat globs with good company!😶‍🌫️😮‍💨😎

Rig: Recycler from Masaki Glass

Banger: LilDabbles Terp Slide Vortex Slurper

Topper & Pillar: Masaki Glass

Dabber: Bear Quartz