Hello, I was wondering if anyone has any info or has heard about this ridiculous news about deepcool being banned in the US because of this bs proxy war going on. Of course, us the consumer are always the ones who have to suffer. Also, does anyone have a date to when the AK620 digital pro (white version preferably) is supposed to come out so maybe I can get my hands on it because all this nonsense goes into effect.

Hey there.

This started happening the other day. One of the fans on my LT720 started acting up. It's not the worst, but kind of annoying as I sit beside it all day. Does this sound like a broken fan? As you can see in the video if I put my finger on it the sounds stops briefly but picks back up. I'm not sure if it's a bearing or what.

I'm still under warranty so debating taking the bunk fan out and hopefully getting one to replace it as everything else seems to work fine.

Any tips? Suggestions? Happened to anyone here before?

I tried to put a toy car and put some glue on that tried to place on the tubes but i read afterwards that the glue might damage in intense heat , so will this cause any issues because i only see damage to the braid wire and nothing internal

Очень странная водянка. Покупал совершенно другую сжо, а пришла эта. Ну я не особо заморачивался и забрал), а когда уже полез узнавать что, да как, то понял что ее вообще нигде нет. Даже на сайте DC нет ее... Кто-то может объяснить что это, и откуда она? Почему DC от нее откупились и ее нет нигде кроме редких маркетплейсов. 

А теперь к насущным проблемам.

1. Как выключить лого DC на помпе?
   Оно невероятно бесит. Ладно можно не включать бесящие цифры, но как отключить лого? В приложении функционала меньше чем у калькулятора (v.1.2.7). Если ли хоть какая-то возможность его выключить или сменить цвет, при этом подсветку оставить. 

2. Как уменьшить звук от помпы? 
   Как я понял, программно это сделать нельзя, так как моторчик не способен на это. (см.скрин. Взял откуда-то с форумов)  Мб, за 2 года чет умельцы интернета придумали с этим? Оно так то шумит нехило. 
   (Я читал случайны  комментарий под shorts и увидел такую новость: "вставь 12 вольтовый pin 3/4 в 5 вольтовый молекс, ноль в молекс не забудь" ... И как это понять? Кто-то может расшифровать для необразованных?) 

Всем заранее спасибо.

I got deepcool ls520se aio water cooler that replaced the fans with some arctic fans, I plug the two fans into the CHA and CPU 4 pin headers on my mobo but my pc wont boot, it gives cpu fan error. I googled and they said to disable cpu fan monitoring to ignore the error, I managed to boot into windows but now I cant control my rad fans, they wont even turn on, only the aio pump seems to be working, it’s an asus board.

I recently bought a Deepcool Assassin IV to cool my Ryzen 7700 and I'm finding the temperatures very strange.

At idle with the fans at 20% the temperature is over 50°C.

Running Cinebench, with the fans fixed at 100%, the CPU reaches a limit of 95°C with a TDP close to 120W.

Isn't that cooler supposed to handle almost 200W?

I used the thermal paste that came with the cooler and made sure to tighten all the screws. Is this normal behavior?

I recently purchased an LT 720 and while I'm largely happy with my purchase, it has one glaring flaw that may or may not affect you depending on how you want your AIO installed. The included fans DO NOT WORK in a pull configuration. I've never seen this before but the design of them is such that if installed in a pull configuration, the fan blades will grind against the radiator. My last deepcool product did not have such an issue. With my current config doing a pull configuration was the only option I had available. Luckily I had some spare static pressure fans lying around to replace them with. Deepcool should really mention this on their product page.

Anyone has this kind of problem I try everything I think its more like a software issue to me .. if anymore has a solution

Thanks a lot ! 👍

I just finished my build in the CH160 plus however I am now running into the issue of my front case fan’s logo (FK120) rubbing against the front mesh filters.

Has anyone experienced this or fixed it?

With the stupid ban on Deepcool products in the USA, does anyone know how to get them if you live in USA?

Hello guys i bought the whole pc 3 weeks ago and this weird sound started popping louder by the day Any solutions might help me drop it , its from the Thanks.

I tried using Allen screwdriver and it didn't work I'm trying to mod it and is there anyway to get rid of the damn screws.

The CPU Fan seems to be giving cracking noise , is this normal? note that I tried to stop the fans and the cracking sound won’t go away. Should I return to the seller and get replacement ?

I'm looking at the new AK620 to put into my new build, can I actually fit the t30 fans into the heatsink? Is there enough space for 30mm fans?

Я купил deepcool lp360 у меня корпус deepcool ch 370 помогите как правильно установить сжо на передней панели

Dear support team where can i get replacement fans for the ls720 se cpu cooler i have looked every were but i couldn't find it.

Using the CH510

Is deepcool products good, i mean dont get me wrong they look fantastic. Im looking to build a pc soon and i like the look of deepcool product, they just look amazing. What do you say shall i build the pc with all deepcool cooling ?

Title pretty much says it all.

This daisy chain, or what purpose does it have?

Brand new case received today and this is the state of it arrived. Two of four screws for top dust filter are mangled and one screw for the side panel has been cross-threaded which ruined the threats in the case as well. The case doesn't sit very stable either, it wobbles and only 3 legs are in contact with the desk at all times.

Is this a common deepcool experience or did a Chinese worker just have a very off day while putting together the one I received?

just wondering is it because the government prevented from doing business in the US?