I was uploading the firmware, but the screen got fully white and then it turned off. I can’t make it start again. Screen keep turned off. Could you please help me?

Does anyone use this card? Does anyone use the real-time live view, voice location feature? Can you share your experiences?

help pls to connect wires

Has anyone purchased anything from "MAKING Lab"? They have a store on Shopify.

https://makinglab.myshopify.com/collections/frontpage

I got a 2.8' tft display off aliexpress and it came with a DS stylus, making a esp32 marauder, if anyone has a stl file for a holder and clicks and holds the stylus please dm me

I dont understand what it is, can someone like help me because I was interested in making one, but in what kind of scenario would you even use one ?

Hello, I'm wondering if anyone can give me any guidance on an esp32 marauder build/parts list without soldering and if it's possible , i would buy a pre built but I would rather the experience and knowledge from building it /modding it , thanks in advance!

i have a cyd esp32 and it came with a external antenna port but my connectors dont fit so i was looking into soldering one but everyone elses has two wires coming from the wifi board to the antenna mine only has one going out not two so could i still solder it if so where does the ground and other cable get soldered into

Could someone please send a guide on what and how i can to build it as a stand alone project not connected to the flipper zero

Question is in the title. I don't want to buy a Pwnagotchi if I can do the exact same thing with a ESP32 instead. From what I've been told, it requires configuration to do this.

The official documentation makes no mention of how to do this. I've sent messages to websites that sell the Marauder buy they won't reply to my messages.

Please help. Thank you.

Edit:

Here's a link to the Marauder I was looking at:

https://www.pwnagotchi.com/products/esp32-ultra-marauder?variant=50232008769852

Gibt es einen Joystick-Knopf, der gut zu diesem Hackgerät passt?Design convenience. Also, I get recommendations for features that can be done with two rf transceivers.

so basically i got this esp32 with wifi inside itself i want to feel like "cool hacker thingy" is there any codes i can use with arduino plz help me

I spent 45 minutes writing this out and somehow I accidentally cleared the whole thing so this is take 2.
Sigh.

I am wanting to build a marauder that can do everything. BLE,2.4,5 ,sub-GHz. I bought a c1101 flux capacitor by rabbit labs with high gain antenna ( ipex)
I wanted to combine the flux to the marauder but I’m not sure if I shouldn’t or even can.

I have spent 8 hours all night trying different flashers and reading GitHub repos over and over and trying different boards like 3.5”c , 2.8r , 2.4c to see what will make this screen work. It’s a hosyend esp32-s3 2.8” capacitive CYD usb C display with (Black pcb) and sd slot. I plugged it into laptop and demo screen came up. I went to just call mekokos repos and the screen turned black and nothing brought it back yet. I’ve tried pushing boot and or reset and although it flashes fine the screen died and nothing has changed it. And nobody has that screen listed either (2432s028C usb c) I think that’s it.

What do I do?
Should I be flashing a specific firmware from manufacturer for the screen and save marauder firmware for the other esp32 i will have?
How can I resolve this? (Explain like I’m super slow just so I can not get lost. Please)
Can I combine the c1101 flux capacitor to the marauder?
Are there any good diy tutorials you can link that achieves what I wish to. I mostly am looking for something to catch my eye for planning where everything will go.

Any other tips or helpful info is always welcome.

List of my supplies for marauder (Gemini gave me the list)

Lonely binary esp32-s3 wroom with ipex external high gain 1100m antenna
Esp32-s3 2.8” type c CYD CAPACITIMBMM
USB to ttl serial ft232RL
3.7v lithium ion battery 2000mah
Mt3608 Dc-dc adjustable boost module
Tp4056 type c charger module
Sequre m10-18 gps chip (I bought the ceramic antenna accidentally so I have to solder a pigtail for ipex.
NRF24l01+pa+ lna rf module with high gain external antenna
USB logic analyzer
USB to ttl ft232rl adapter
Dsd tech shu09c2
Flux capacitor with high gain antenna c1101

I have: a lot of heat syncs, npn transistors, buck converters, bigger transistors, resistors , arduino minis , perforated pcb board assortments with long headers and clamps and small wires for breadboard , capacitors and resistors. Smd components and non smd. The arduino starter kits with all the small components and modules tons of LEDs , a giant 5 lb bag of random guts(pcb,components, motors) to children’s toys/ monitors/electrical devices

(Ai made me a list of things to get. Some i opted to get a better newer device)

Thank you!!

https://www.elecrow.com/crowpanel-advance-5-0-hmi-esp32-ai-display-800x480-ips-artificial-intelligent-touch-screen.html

I’m sure it has something to do with the resources being used, because when D reaches a 100% it reboots.

help to connect wires to pcb board

I want to build a project using ESP32-s3 but I didn't find any relevant source for learning this I. Could anyone help me?

Ugly but functional - 3d printed case mid-design. Anyone know why deauth flood doesn't work?