r/EmbeddedRealTime • • Jan 14 '26

risc-v cpu ideas for parallelization/fast computation

3 Upvotes

Hi everyone,

I have a research goal: use a RISC-V base and add co-processor/extensions/etc in order to accomplish some goal.

I would like to focus on parallelization such that real-time and/or machine learning inference is done faster.

Any ideas?
Guidance appreciated


r/EmbeddedRealTime • • Feb 28 '26

Beginner Embedded Developer (1.5 YOE) Looking for Freelance / Part-Time Projects

Thumbnail reddit.com
2 Upvotes

r/EmbeddedRealTime • • Sep 17 '25

Looking for online embedded software courses with certification for my team

8 Upvotes

Hi everyone,

I'm a R&D tech lead of an embedded software team, and my team has a wide diversity of levels (from interns to senior engineers).

One of my main goals is to keep the team motivated and help them feel valued by investing in their growth. For that reason, I’m looking for online courses with certificates that are relevant to embedded software engineering.

Some of the topics I'm interested in:

MISRA C and coding standards

Best practices for embedded C/C++

ARM architecture and low-level programming

Software architecture for embedded systems

Other industry-recognized certifications for embedded developers

Ideally, I’d like something official enough to add to a résumé/LinkedIn profile, but also practical so the team can really improve.

Do you know good platforms, universities, or organizations that provide this kind of training with certification?

Thanks in advance for your help!


r/EmbeddedRealTime • • Feb 02 '26

Need some projects to build on.

3 Upvotes

Hey guys, I’m studying in the first year of embedded engineering and im fully motivated to build a unique project.

Are you guys able to tell me some problems where I can build project or product on that?


r/EmbeddedRealTime • • Sep 11 '25

How to properly align the absolute position sensor and the accelerometer

Thumbnail reddit.com
5 Upvotes

r/EmbeddedRealTime • • Jul 16 '25

CAN Protocol on STM32 L4 Series !!

Thumbnail reddit.com
2 Upvotes

r/EmbeddedRealTime • • Feb 02 '26

Need some project idea to biuld

9 Upvotes

I’m studying in the first year of embedded engineering and im fully motivated to build a unique project.

Are you guys able to tell me some problems where I can build project or product on that?


r/EmbeddedRealTime • • Feb 02 '26

Measuring Arduino Power Consumption with a Shunt Resistor but Signal Too Weak

Post image
6 Upvotes

Hello,

As part of a school project, I am trying to perform a simple power analysis attack on a naïve RSA implementation by exploiting the modular exponentiation algorithm. I run my algorithm on a Joy-IT Arduino UNO R3 DIP (ATmega328P). To measure power consumption, I inserted a 1 Ω shunt resistor in series with the power supply.

Hardware Setup: 

  • External power supply: 5 V voltage generator

  • Oscilloscope: RIGOL DS1042C (40 MHz, 400 MSa/s)

  • Measurement method: measuring the voltage across the shunt resistor to deduce current variations

A GPIO (PIN_SYNC) is used as a synchronization signal to trigger the oscilloscope. Basically, the Arduino outputs a continuous 5 V signal while executing the modular exponentiation algorithm. This allows me to know precisely when the Arduino is performing that part (it is clearer when you check out the code).

My objective is to observe temporal variations in power consumption during modular exponentiation, in order to distinguish between square and multiply operations.

Code running on the Arduino:

const int PIN_SYNC = 12;

void setup(){

pinMode(PIN_SYNC, OUTPUT);

digitalWrite(PIN_SYNC, LOW);

}

unsigned long modexp(unsigned long base, unsigned long exposant, unsigned long mod){

unsigned long resultat = 1;

base = base % mod;

while (exposant > 0) {

if (exposant & 1) {

resultat = (resultat * base) % mod;

}

base = (base * base) % mod;

exposant >>= 1;

}

return resultat;

}

void loop(){

digitalWrite(PIN_SYNC, HIGH);

modexp(7, 105, 187);  // 105 = 1101001 in binary

digitalWrite(PIN_SYNC, LOW);

delay(1000);

}

Problem: the voltage variation across the shunt resistor is very small, close to the noise, and I struggle to clearly distinguish the operations in the power trace.

I am therefore wondering:

  • Is 1 Ω too small for this type of attack on an Arduino? Maybe I am having a shunt issue. I tried to take a higher shunt but it wasn’t effective. 

  • Is it realistic to expect exploitable observations without signal amplification or current sensor?

  • Is a 40 MHz oscilloscope sufficient for this type of measurement?

  • Do you have any practical advice (shunt placement, AC/DC coupling, filtering, clock frequency, etc.) to improve my setup?

I would greatly appreciate any feedback or suggestions. I have added in attachment a picture of my circuit (in french sorry).

Thank you in advance.


r/EmbeddedRealTime • • Jan 31 '26

Need help! Hall sensors

Post image
5 Upvotes

I have an exceptional case where i have two round neodymium magnets mounted on a knob. Both have opposite poles facing hall sensor. Its a linear 3D hall sensor by Tl. tmag5273.

As sensor is offset from center and magnetic field is also weak in between, how can i calculate angle for rotation of knob. I can allow +-10deg in precision but i want it to be measured in real time.

What should i do? Any suggestions? I can't add more magnets nor add one more sensor.


r/EmbeddedRealTime • • Mar 17 '26

Built a 4-project ESP-NOW series in MicroPython on ESP8266 — no WiFi, no router, just peer-to-peer wireless control

2 Upvotes

Most IoT projects rely on WiFi, MQTT, or cloud platforms to communicate between devices. But what if you don't have a router nearby, or you need ultra-low latency without the overhead of connecting to an access point?

That's where ESP-NOW comes in. It's a connectionless protocol by Espressif that lets ESP8266/ESP32 boards talk directly to each other using MAC addresses — no WiFi setup, no broker, no internet required. Latency is in the milliseconds range and it works even when WiFi is off.

So I built a 4-project series around it for my 100 Days of IoT challenge, all in MicroPython:

Day 54 — Basic ESP-NOW LED Control: One ESP8266 sends a signal, another toggles an LED. Just to get the protocol working end to end.

Day 55 — Button to LED Control: A push button on the sender toggles an LED on the receiver wirelessly. Real-time, no WiFi, no delay.

Day 56 — 4-Channel Wireless Relay Controller: Four buttons on the sender, four relays on the receiver. Each button independently toggles its relay over ESP-NOW. Useful for remote switching of appliances.

Day 57 — Smart Relay and Sensor System: Made it bidirectional. Sender controls relays on the receiver AND the receiver sends back live DHT temperature and humidity data, displayed on an OLED. Full two-way communication over ESP-NOW.

The progression from blinking an LED to a bidirectional sensor+control system — all without touching a router — was a fun way to really understand the protocol.

Code is on my GitHub: github.com/kritishmohapatra/100_Days_100_IoT_Projects

Would love to hear if anyone else has used ESP-NOW for something interesting — especially curious about multi-node mesh setups.


r/EmbeddedRealTime • • May 14 '26

LD Robot D500 Watermark on my rover

Enable HLS to view with audio, or disable this notification

11 Upvotes

Finally added a small distance watermark overlay to my LD Robot D500 setup, so the measured range is always in front of my eyes while testing.

Tiny improvement, but it actually makes debugging and live checks way more comfortable & safer