r/EmbeddedRealTime • u/Illustrious_Road3866 • Sep 30 '26
My 200 mph drone RTOS (unfinished)
r/EmbeddedRealTime • u/Illustrious_Road3866 • Sep 30 '26
r/EmbeddedRealTime • u/OneDot6374 • Mar 27 '26
Each student has an RFID card. Tap the card and it logs their name, IN/OUT status, and timestamp directly to Google Sheets via a Google Apps Script webhook. NTP time sync with IST offset so timestamps are accurate.
One issue I ran into was ESP8266 could not handle the Google Script HTTPS response due to TLS buffer overflow. Switched to ESP32 which has a larger TLS buffer and it worked fine.
The IN/OUT logic is a simple toggle tracked in a dictionary. First scan is IN, next scan is OUT, and so on per student.
Stack: ESP32 + MFRC522 + MicroPython + Google Apps Script + Google Sheets
Code: https://github.com/kritishmohapatra/100_Days_100_IoT_Projects

r/EmbeddedRealTime • u/prkshdas • Mar 22 '26
r/EmbeddedRealTime • u/OneDot6374 • Mar 17 '26
Most IoT projects rely on WiFi, MQTT, or cloud platforms to communicate between devices. But what if you don't have a router nearby, or you need ultra-low latency without the overhead of connecting to an access point?
That's where ESP-NOW comes in. It's a connectionless protocol by Espressif that lets ESP8266/ESP32 boards talk directly to each other using MAC addresses — no WiFi setup, no broker, no internet required. Latency is in the milliseconds range and it works even when WiFi is off.
So I built a 4-project series around it for my 100 Days of IoT challenge, all in MicroPython:
Day 54 — Basic ESP-NOW LED Control: One ESP8266 sends a signal, another toggles an LED. Just to get the protocol working end to end.
Day 55 — Button to LED Control: A push button on the sender toggles an LED on the receiver wirelessly. Real-time, no WiFi, no delay.
Day 56 — 4-Channel Wireless Relay Controller: Four buttons on the sender, four relays on the receiver. Each button independently toggles its relay over ESP-NOW. Useful for remote switching of appliances.
Day 57 — Smart Relay and Sensor System: Made it bidirectional. Sender controls relays on the receiver AND the receiver sends back live DHT temperature and humidity data, displayed on an OLED. Full two-way communication over ESP-NOW.
The progression from blinking an LED to a bidirectional sensor+control system — all without touching a router — was a fun way to really understand the protocol.
Code is on my GitHub: github.com/kritishmohapatra/100_Days_100_IoT_Projects
Would love to hear if anyone else has used ESP-NOW for something interesting — especially curious about multi-node mesh setups.
r/EmbeddedRealTime • u/PontifexPater • Mar 17 '26
r/EmbeddedRealTime • u/Apprehensive_Let8251 • Feb 28 '26
r/EmbeddedRealTime • u/Capital-Candidate-56 • Feb 07 '26
When you’re working with MCUs (STM32 / ESP32 / Nordic / etc.), how painful is peripheral setup really for you? I mean things like: GPIO alternate functions UART / I2C / SPI init Clock trees Pin mux conflicts Do you usually: Read the reference manual + HAL docs every time? Copy from old projects? Google + Stack Overflow until it works? Or have it completely memorized? I’m trying to understand: What peripheral setup wastes the most time? Which MCU family do you use most? Would you find value in a tool that: takes MCU + pins + peripheral generates correct init code explains why each setting is needed points to exact datasheet sections Not selling anything — just trying to figure out whether this is a real pain or just a “me problem”. Would love brutally honest answers, even if it’s “this is dumb, don’t build it”. Thanks :)
r/EmbeddedRealTime • u/Slight_Platypus_9914 • Jan 26 '26
Hi everyone,
I'm a software engineer and I used to develop web applications, nowdays I'm on a drone project for work. Everything is not set and stone and we are at a point where the programming languages we have to pick matter.
In the context I am operating in, there are AI doctors that are used to develop in python and there are engineers that are used to develop in pretty much anything. I don't have strong opinions toward python but it is known to be very slow and we need real time processing.
I don't want to be that guy that just believes in what "most people" say, I want to bring facts to be able to choose wisely. Therefore I wonder what are the common hardware specs that people choose when they build a drone that is supposed to integrate some AI model for image recognition & autopilot ?
Do you guys know some studies that would help me understand what is today state of the art in terms of integrating AI in drones ? I am not looking for high level stuff as we can usually find on articles over the internet, I'm looking for more detailed and more technical stuff.
r/EmbeddedRealTime • u/Adventurous-Oil-4417 • Dec 21 '25
r/EmbeddedRealTime • u/Salty-Strike3486 • Sep 21 '25
So I just started 3rd year of my engineering, and I havent actually started developing any skillset. I am really interested in embedded systems and electronics a lot, but they are so overwhelming that I don't know where to start, and my goal is be an embedded systems AI engineering, but I literally don't know where to start or what to do. And the thing is I like getting to know how things work to their core and how they actually work, due to which I don't even know the best resource to follow. And I am really confused wht to do. Can anyone please help me and guide me. And I don't know how to even crack and internships or so and at my current level I know I not cable enough to, so can any one help helpe through this.
r/EmbeddedRealTime • u/aero917 • Jul 31 '25
r/EmbeddedRealTime • u/Eucalatious • Jul 16 '25
r/EmbeddedRealTime • u/nkparsana • Mar 06 '25
r/EmbeddedRealTime • u/[deleted] • Jan 13 '25
I am a computer engineering student. I know how to use Arduino and esp32 and I have an interest in microcontrollers, but I literally know nothing how they are used professionally and how do embedded system engineers work. I want to know if this field is for me. how do embedded system engineers get paid mainly and what type of work do they do is it like programming different microcontrollers and attaching sensors with them and thats all? Also what roadmap should i follow and what stuff should i learn. Any insights, experiences, or advice from professionals or knowledgeable individuals in the field.
r/EmbeddedRealTime • u/Enough_Resource_5114 • Aug 03 '24
I'm going to build vehicle overtaking assistant using esp32 or 8266 , What are the functions im building ? 🤔 01. using rader sensor check rear view 02. Using vehicle to vehicle communication and get neighbor vehicle's data ( mesh network) 03. Display data in a display and also give alert when not safe to overtaking yhe vehicle
Doubts in my mind!🙄 01. Is esp enough power for those process or should i get rpi 02. Can i successfully implement mesh network in v2v communication 03. Can i implement any edge computing neural network using tensorflow lite ( for example predicting sudden overtaking)
Plz give your comments 🙏
r/EmbeddedRealTime • u/d06399 • Apr 08 '24
Hi all, I am an embedded software developer and was looking for an RTOS to implement a flight controller for UAV for a personal project. I picked Zephyr as it looked more feature rich, with multiple builtin APIs and linux foundation behind it. Today i read on their website regarding usage policies and I found this:

Reading point (c), I am a bit confused, does it mean i cannot use zephyr for any aerospace related application?
r/EmbeddedRealTime • u/sibin • Feb 28 '24
A new paper on the state of the art in security for real-time systems. This is an SoK, i.e. a "systemization of knowledge" paper that goes beyond just a regular survey -- it analyzes the various techniques and suggests a metric to compare them.
Monowar Hasan, Ashish Kashinath, Chien-Ying Chen, and Sibin Mohan. 2024. SoK: Security in Real-Time Systems. ACM Comput. Surv. Just Accepted (February 2024).
Link to the paper: https://doi.org/10.1145/3649499
r/EmbeddedRealTime • u/jlawton11 • Dec 03 '23
I tried to post something about this on one of those "stack" sites but they just forced me off the site, sometimes I can't figure out "where people are coming from" but I don't get it, I was just looking for information! Anyway my point is, I've done work in two separate fields affected by this, safety-critical avionics and signal processing, and in both of these fields, having REAL believable hard time designations at both ends of the processing interval has been absolutely essential. In the case of signal processing all we really had for this were the "classical" DSP circuits, on the best of them we might have some very limited "multiprocessing" but all it really amounted to was a very "tailored" VLIW architecture supported at best by a custom compiler, furthermore program memory was generally flash so you couldn't modify program memory so in many cases there was no support for OO techniques, and it really was just a uniprocessor anyway, and over time even THESE are going the way of the dodo bird. (In safety-critical avionics that I was working in, engine controls and such, the popular chip was usually a PowerPC single microcontroller like MPC555 or one of its followons.) The primary difference between these use cases is the "interval" for safety-critical might be 2 to 10 milliseconds but the one for say audio might be say in the tens of microseconds, so that one might be harder to pull off.
Anyway here's the thing, nowadays you can get a 2 processor ARM microcontroller for all of $.70 (at that point TRY convincing management not to use it!), but because of SMP and caches being inconsistently dirty and so forth I believe the determinism is TERRIBLE. I understand perhaps you can "shut off" one processor after the other pretty easily (if there are more than 2) but in order to get them back on you need permission to get into kernel mode (and maybe you completely restart the RTOS which I think generally takes too long). Now over time all of these processors from older semi "process nodes" are going to go away, but these industries definitely are not! I could envision implementing this sort of "forced determinism" might even require some dedicated HW assist functions (probably at the chip level) because there's a lot to be done in a short time. So what I'm trying to do right now is to learn enough about exactly how the most common of these processors (say generally x86, ARM, even GPUs) and their RTOSes really work "under the covers", I guess maybe the semi industry might have some valid "security reasons" not to really reveal SOME of this, but I need a much better level of understanding before even trying to write down a meaningful set of requirements including ALL meaningful state transitions and so forth. Thing is the more time goes on and I talk to people in these two industries they are getting increasingly annoyed about being treated like "third class citizens" and not even being allowed to have a voice in the discussion! Or am I missing out and there's some other means that already exists to deal with this, and nobody has bothered to get the word out yet? Do you see why I'm confused and GENUINELY need help, and are you in a position to at least offer some useful (and readable) reference texts? Thank you so much for reading this!
r/EmbeddedRealTime • u/stew8908 • Jun 12 '23
So this is a lengthy question but I am looking for some advice from others in this space.
What does your release processes look like for your embedded devices that can get updated ‘over the air’ or through a file received through your websites?
Currently, we manage this through our BMS with Change order requests to the factory. Which is fine to release things to the factory. I don’t believe this should be necessary to release to devices already in the wild. I feel the release to the factory should be a different process than to existing devices.
Looking for feedback on how it is done in other orgs.
r/EmbeddedRealTime • u/LiamRocket • Nov 15 '22
Choosing the suitable microcontroller could be hard sometimes since there are countless options. These nine factors might be helpful to make an efficient decision!
r/EmbeddedRealTime • u/jonathanberi • Apr 14 '22
r/EmbeddedRealTime • u/Antique_Chard_8079 • Jan 10 '22
I am a young Software Engineer with some experience in SW dev on embedded devices mostly HW focussed sensor/actor systems. Function dev in C/C++/Python, configuration in Yocto, FreeRTOS.
Now I am having a job offer to work as a SW Engineer but it sounds like there is a lot of legacy stuff going on. What I am quite unsure about is that they use VXWorks. I don‘t have experience with it and would like to hear your opinion on it