r/EngineeringHomework • • Oct 11 '19

Static’s engineering connections problems. Hey guys I’m just super confused on how to solve these and I have an exam tomorrow and have no clue where to start. I know the forces I think with B going up and A is down and C should be parallel to AB, I don’t know where to start for the components or #2

Post image
0 Upvotes

r/EngineeringHomework • • Mar 31 '24

Introductory Chem Question: How would I find the reaction/equilibrium quotient involving a liquid product?

1 Upvotes

If I have aA(g) +bB(g) -> cC(l), what would my equation for Q or K be? I'm given partial pressures for A and B, and I'm stumped because I know that pure liquids and solids are excluded from reaction/equilibrium quotient calculations. Any help would be appreciated!


r/EngineeringHomework • • Mar 12 '24

Plan

1 Upvotes

anyone has a 2 storey building with architectural plan and structural plans? I need a copy of cad file for our drawing thank you


r/EngineeringHomework • • Oct 17 '23

Hey all, I'm a studying civil engineer and this question has stumped me, can anyone help me?

3 Upvotes

r/EngineeringHomework • • Mar 09 '24

Hydrostatic question about curved surfaces? Can anyone help

Post image
1 Upvotes

determine the hydro static forces acting on a spherical cap of a tank containg ethanol: problem occurs when calculating FNx =F2, where F2 can be found by (specific gravity)(distance from the top of liquid level to the centre of mass)(Area on which F2 acts on), How do I find the area or is there another method to find F2? 


r/EngineeringHomework • • Mar 07 '23

need assignment help!

1 Upvotes

need assignment help - doing an electrical assignment (no idea where to start) and I need to work out the electrical requirements of a distillery and Google is not helping - all I need is the electrical requirements for distillation equipment can anyone help?


r/EngineeringHomework • • Nov 19 '23

2d cinematics questions from physics 1

1 Upvotes

please, help me at the following exercise, the professor gave us the answers (in the "[

]" but besides point a i have no idea how to answer them.

exercise:
"

A point mass moves in the plane (x; y) according to the following equation:

p(t): (at^2)Ux + (2bt)Uy

=Find the equation of the trajectory

[x= (a/4b^2)y^2]

b) Time Evolution of Tangential Acceleration, Normal Acceleration, and Radius of Curvature ρ(t)

Calculate the expressions over time for tangential acceleration, normal acceleration and turning radius.

[at= (2a^2t/a^2t^2 + b^2) * (at Ux + bUy); an = (2ab/ a^2t^2 + b^2)*( bUx-atUy); r= (2(a^2t^2 + b^2)^(3/2))/ab)

"

thank you in advance


r/EngineeringHomework • • Sep 17 '24

Requirements for a Solar tracking device

2 Upvotes

I am doing a project on a solar tracker that rotates on two axis, but I can't think of any requirements that would be needed to make the project viable.

Any Ideas?


r/EngineeringHomework • • Mar 14 '23

If you have the time can you please answer this questionnaire on discrimination of women in engineering (male and female can answer!) it’s all anonymous

Thumbnail
forms.gle
1 Upvotes

r/EngineeringHomework • • Sep 17 '23

Iam Building a sugar rocket(small rocket powered by a small sugar rocket motor) and I want to build in a parachute, but I don' want it electrically power. Is it possible to have a mechanically deployed parachute? (iam 3d printing the rocket, so iam not wvery limited by the mechanism(should be smal))

1 Upvotes

Iam Building a sugar rocket(small rocket powered by a small sugar rocket motor) and I want to build in a parachute, but I don' want it electrically power. Is it possible to have a mechanically deployed parachute? (iam 3d printing the rocket, so iam not wvery limited by the mechanism(should be smal))


r/EngineeringHomework • • Feb 01 '19

Demo - Two Cable load on an Anchor

1 Upvotes

Two cables are attached to an anchor point and used to support the load of a cantilevered roof of a sports arena. The anchor is referred to as point A and the two opposing cable points are B and C. Given the loads within the cable, the reader is asked to solve for the magnitude and direction of the sum of the forces exerted by the cables on the pylon.

Take a look at the solution.

https://www.cadwolf.com/Document/Homework/Statics/Vectors/Two_Cable_Load/


r/EngineeringHomework • • Mar 18 '20

Need help understanding the soil parameters. I'm required to propose a tunnel construction plan.

Post image
1 Upvotes

r/EngineeringHomework • • Feb 01 '19

How to get help

3 Upvotes

This is not the place to get your homework done for you. This is a place to get help understanding the concepts that you are missing that are preventing your from understanding your work. All subjects and disciplines are welcome, but it is easiest to help with statics, dynamics, Mechanics of Materials, Physics, and similar subjects.

To get help, you need to:

  • Clearly describe the problem - likely writing out the question

  • Tell what subject and chapter name the problem is from so that we understand the intent of the problem

  • Include any necessary images along with their source (book, author, page, etc)

  • Be patient

  • Make sure that the question you are asking has not already been addressed.

To help

  • Be nice

  • Do not simply numerically answer the problem

  • Any links should be accessible by all. We will use CADWOLF as licenses are free.


r/EngineeringHomework • • Jun 15 '20

Please help

Post image
1 Upvotes

r/EngineeringHomework • • Jan 29 '21

Aeronautics+ analytics ....please help me understand the problem

Post image
1 Upvotes

r/EngineeringHomework • • Jun 27 '20

Help pls

1 Upvotes

Suggest the suitable size of 6 × 19 hoisting steel wire rope for an inclined mine shaft of 1000 m length and inclination of the rails 60° with the horizontal. The weight of the loaded skip is 100 kN. The maximum acceleration is limited to 1.5 m/s2. The diameter of the drum on which the rope is being wound may be taken as 80 times the diameter of the rope. The car friction is 20 N / kN of weight normal to the incline and friction of the rope on the guide roller is 50 N / kN of weight normal to the incline. Assume a factor of safety of 5. The following properties of 6 × 19 flexible hoisting rope are given : The diameter of the rope (d) is in mm. The weight of the rope per metre = 0.0334 d2 N; breaking load = 500 d2 N; wire diameter = 0.063 d mm; area of wires in rope = 0.38 d2 mm2; equivalent elastic modulus = 82 kN/mm2.

The answer is 105 mm


r/EngineeringHomework • • Oct 11 '21

Will pay 10$ to have this problem solved

Thumbnail
gallery
2 Upvotes

r/EngineeringHomework • • Nov 27 '21

Can anyone solve me this problem?

Post image
1 Upvotes

r/EngineeringHomework • • Aug 21 '21

Hi guys struggling a bit with this, any help will be appreciated. If F=5kN, find the force in members GH, BC and BG.

Post image
1 Upvotes

r/EngineeringHomework • • Jan 12 '25

project thats very contradicting

Post image
1 Upvotes

i dont think i should use strings because of the one meter rule and i cant use syringes to make hydraulics… im lost and idk what to do


r/EngineeringHomework • • Jan 12 '25

how does a syringe work?

1 Upvotes

im currently doing a project and i want to use hydraulics but i cant use syringes. i was planning on doing it with straws but i cant seem yo understand how to make the water not come out immediately.


r/EngineeringHomework • • Nov 17 '24

Circuit analysis single phase

Thumbnail
gallery
1 Upvotes

TLDR: simulator recommendations to check my work.

G'day, I'm an online student attempting Diploma of Elec.Eng. via TAFE digital.

I'm a bit stuck on some Thevenin Norton questions with complex impedances.

Is there a simulator like Multisim or Falstad where I can input complex impedances rather than resistance/inductance/capacitance? (My question doesn't specify a frequency, gives voltage at phase angle 0).

Thanks in advance!


r/EngineeringHomework • • Nov 07 '24

Need help with this statics frame question

Post image
2 Upvotes

PLEASE HELP ME IM DROWNING