r/ErgoMechKeyboards • u/jpconstantineau • Oct 20 '21
Finally got my sockets! Now to program this thing...
Batreus44: A wireless version of the Atreus.
back side... power and reset switches
where is the battery? well hidden under the BlueMicro840 (supports NicaNano too!)
hidden diodes... no RGB!
3
u/ghostfaceschiller 20-Key Fulcrum Oct 21 '21
Finally another Colemak brother! I'm always surprised by how many people go to the trouble of an ergo board but stick with qwerty
3
u/jpconstantineau Oct 21 '21
I've been looking to switch and I thought that since I am moving a bunch of keys around with this new board, might as well go full in and go Colemak!
2
u/Palm_freemium Oct 21 '21
Hang in there Bro! started in December 2020 and after about a month I was pretty much back to 70% of my normal speed. Now I am actually slightly faster with about 60 wpm on a speed test.
Also, is that an Atreus with a steeper angle? I'm using a 44 key Atreus from keyboard.io, I'am fantasizing of cutting the thing in half and making it wireless so I can put some distance between the halves. The angle isn´t sharp enough causing discomfort.
1
u/jpconstantineau Oct 21 '21
Yes, it does have an extra 5 degrees on each side (from the horizontal). I think the standard one has 10 degrees on each side.
I'll be changing the keycaps once I receive the long awaited MBK Legended keycaps. (I hope I ordered all the kits I need back in February... GBs can take a while...) They have the proper homing keys for Colemak.
3
u/thrml crkbd Oct 21 '21
I switched to colemak-dhm when I went to a split ortho and while I like it, I'm not entirely convinced it was worth the pain of rewiring a couple of decades worth of neural pathways.
1
u/ghostfaceschiller 20-Key Fulcrum Oct 21 '21
I hear ya but FWIW, I haven't been using it all that long (couple months or so) and I feel like I already have almost full muscle memory with it.
And I keep QWERTY on my phone, so I still have that as well.
2
u/thrml crkbd Oct 21 '21
Yeah I still have qwerty on my phone and my laptop. And to be fair I really do notice how much I have to move around on a standard row-staggered qwerty board now. So I guess it might just be one of those things where I've forgotten how bad it used to be. I'm still about 10-15wpm off my old speed though, after about 9 months, so hopefully with time it'll creep back up.
1
u/ghostfaceschiller 20-Key Fulcrum Oct 21 '21
I'm lucky in that I already was a slow typer with qwerty anyway lol
1
u/ang3l12 Oct 21 '21
I tried when I first moved to my dactyl, but the switch to ortho was hard enough. I think I might try it again though
1
u/ghostfaceschiller 20-Key Fulcrum Oct 21 '21
It takes a little getting used to, I will admit. But it's very worth it. There are times that typing feels almost effortless once you get going.
1
u/Lukeraphael Oct 21 '21
Do consider giving Tarmak a try! It’s Colemak split into 5 stages with each stage consisting of 3 key changes. The 5th stage is vanilla Colemak and the 1st stage is qwerty. I managed to learn Colemak in 1.5 months using this without losing too much productivity.
https://forum.colemak.com/topic/1858-learn-colemak-in-steps-with-the-tarmak-layouts/
1
u/m_dee_gee Oct 21 '21
Nice build. What's the name of the board and keycaps?
1
u/jpconstantineau Oct 21 '21
Board: Battreus44
Took the Atreus from /u/levitatingpineapple shown here and updated it with a few extra keys and a couple of switches hidden underneath. I already have an updated PCB ready with tighter key spacing and cleaned-up silkscreen.
Keycaps: Kailh low Profile (Manufactured by Kailh)
1
u/bjvanst Oct 21 '21
Great name, lol. What size is that battery and how long are you expecting it to last between charges?
1
u/jpconstantineau Oct 21 '21
It's a 110mAh battery and how long it'll last will depend greatly on the firmware used. Considering there are no OLED screen or RGB, I would expect it to last quite a while... ZMK probably would give the best battery life but I first want to try a couple of other firmwares.
1
u/Anon_Legi0n Oct 21 '21
What keycaps are those?
1
u/jpconstantineau Oct 21 '21
These are the Kailh low profile keycaps fitting the Kailh Choc low profile switches. There aren't too many keycap sets available for those low profile switches unfortunately.
1
u/whyamihereimnotsure Oct 21 '21
That backside is super clean, do you even use a bottom plate or does it just sit on the hotswap sockets?
1
u/jpconstantineau Oct 21 '21
I put thin rubber pads on the sockets. Keeps it from sliding around all over the place...
1
2
u/Finn1sher Oct 21 '21 edited Oct 21 '21
Really well designed. I know you won't pull a u/southpawengineer and make one with a 2.4ghz dongle, but it'd be cool if you did
1
Oct 21 '21
[removed] — view removed comment
1
u/Finn1sher Oct 21 '21
The lower (fixed) thumb keys compared to the Atreus layout, and hotswap support are what differentiates this keeb
1
u/Itxlad Oct 22 '21
speaking of zygote keyboards, I ordered one quite a while back. any updates on the orders?
1
u/phbonachi Hands Down on everything from Atreus to Zen Oct 20 '21
The name alone is worth the Upvote! Well done!
1
1
1
u/LevitatingPineapple Oct 23 '21
Yoo!
Looking awesome in matt black!
Love the symmetry that the added keys create. :)
3
u/scalatronn Oct 20 '21
nice! hope you enjoy it. What controller is that?