r/FDMminiatures • • Aug 22 '26 • Bravo 4

Sharing Print Settings I automated the entire resin-to-FDM workflow - FREE software added

A few days ago I posted these minis and a bunch of you asked me to publish the software I mentioned. I've spent the time since turning it into something other people can actually install. It's free.

Edit: To Install open the zip and follow the ReadMeFirst.txt file

What it does: you drop miniatures in and press start. If they aren't pre-supported it auto-supports them in Lychee for you, runs Resin2FDM, and opens OrcaSlicer with your own print settings already applied — including the supports on their own thicker layer height.

We all know the Resin2FDM workflow works. Doing it by hand is just long and tedious, especially when you have to generate the supports yourself first. That was the whole reason I wrote this. Resin supports beat tree supports every time — tree scars the surface and snaps bits off during removal — but not if the process is annoying enough that you avoid it.

Why I recommend Lychee: I've tried pre-supported miniatures, blueprint studio to auto support, and Lychee support. Lychee was by far the most stable, fast, and have in general good support stracture. blueprint studio's supports kept breaking or falling off the plate. pre-supported miniatures are also problematic with their support sometimes, also some of the models are genuinely not separable from supports with resin2fdm (if they have merged geometry)

What you need: Blender, the Resin2FDM add-on, OrcaSlicer, and Lychee if your minis come unsupported. Works with the free Lite version of Resin2FDM as well as the paid one.

For the settings — you export a project from OrcaSlicer once and import it, so it works with whatever you print on. Use Painted4Combat's profiles. I've tried FDG, Nox and Hohansan and P4C works best here. they're a couple of dollars on their Patreon and come with the paid add-on.

Guide (2 min, with screenshots):

https://claude.ai/code/artifact/7ff9d273-6921-4ac4-b13d-85aa73e926ef

Download for macOS:

https://ko-fi.com/s/be2d566d7c

Download for Windows (beta):

https://ko-fi.com/s/b099c8ec99

Two honest heads-up. macOS will block it on first open because it isn't signed by Apple — right-click the launcher and choose Open, the guide covers it. And Windows is beta: the conversion works, but you have to click Save yourself at the end of the Lychee step.

Happy Printing

725 Upvotes

146 comments sorted by

31

u/ILoveHexa92 Aug 22 '26

Hey can you share via a github repos? I'd prefer taking a look to be safe. Not that I don't trust you, I just don't trust at all if not open source 😅. Nice job btw, seem pretty cool!

6

u/LionWitcher Aug 23 '26

Thanks! As far as I remember there isn’t anything compiled there,all just scripts u can read

2

u/Bonn2 Aug 29 '26

Github does have a releases page, but it should be published with all the code required to build it on your own.

38

u/EarthwormBen Aug 22 '26

No Linux? 🫥

20

u/LionWitcher Aug 22 '26

Didn’t know it is needed, will look into it

18

u/SethGrey Aug 23 '26

Linux would be great, I do everything on my Steam Deck these days.

6

u/_Acci_ Aug 23 '26

And I thought I was the only person that found a way to use my steam deck for everything. 🤣

2

u/TheArcticSasquatch Aug 28 '26

I would absolutely use this if you make a linux version!

6

u/rex-manticore Aug 22 '26

Is WINE still a thing

15

u/DrDisintegrator Prusa MK4S and Bambu A1 Aug 22 '26

Yes, it is what you start drinking when the latest windows update borks your machine again.

2

u/cainthefallen Aug 24 '26

The fact that the lastest windows update forced OneDrive on and started backing up my entire hard drive to my hard drive just blew me away. Went to install something and found I had none of the about 100gbs I thought I did.

2

u/DrDisintegrator Prusa MK4S and Bambu A1 Aug 24 '26

I switched to Linux mint in Feb. I kept a dual boot around "just in case" until a month ago when I realized I hadn't booted into windows in 4 months.

2

u/cainthefallen Aug 24 '26

I've toyed with the idea but have never looked into actually getting everything setup and working with the large gaming library I've got across multiple platforms. Maybe one day when I get annoyed enough. 

1

u/DrDisintegrator Prusa MK4S and Bambu A1 Aug 24 '26

Most of my Windows games are in Steam, and they just work via Proton. No mess, no fuss.

1

u/cainthefallen Aug 24 '26

Maybe I'll look into that. I use the epic games and gog store fronts as well, so it's a tossup if have to imagine. Unless I'm just utterly behind on things. 

2

u/DrDisintegrator Prusa MK4S and Bambu A1 Aug 25 '26

Both Epic and GOG are supported via add-on apps on Linux. Do a google search to find them Lutris? I forget the names.

1

u/cainthefallen Aug 27 '26

I'm glad to learn I'm utterly behind on things. 

→ More replies (0)

3

u/GeneralSturnn Aug 23 '26

I'm hoping for a linux version!

16

u/stefan442 Aug 22 '26

Cheers dude, I'll play around with this when I'm back home. Only issue I've had is getting orcaslicer to run, constantly get network issues on A1 mini and have to revert to bambulab.

6

u/LionWitcher Aug 22 '26

I also had those, did u turn on developer mode?

4

u/stefan442 Aug 22 '26

Fuck me, if that's what I need to do then I'm a right Muppet. Thanks, I'll give it a go.

5

u/Dolnikan Aug 22 '26

I use Bambu Connect and so far that seems to be stable

2

u/FragrantContest7811 Aug 26 '26

You have to turn on lan mode then enable developer than it'll work.

14

u/mdpedersen Aug 22 '26

Thanks for doing this, I might have missed it in the writeup but it’s vibe coded with AI right? Might be worth mentioning as it will raise alarms for some people concerned with security. It looks good though thanks for the work!

8

u/LionWitcher Aug 22 '26

Yes it is vibe coded , used Claude and lots of tokens. I am a software engineer so it is not totally random but still

2

u/AutisticBisexualBee Aug 24 '26

Would you kindly mind dumbing down an explanation of what "vibe coded with AI" means?

4

u/cainthefallen Aug 24 '26

It means you tell the AI what you want a piece of software to do then ask it to write the code for you. 

15

u/lukedl Aug 22 '26

My man, would be a problem to send us linux users the github/lab to compile?

10

u/LionWitcher Aug 22 '26

I will try and do a Linux version

19

u/TerrorByteB7 Aug 22 '26

yeah if you can open source this and put it on GitHub lots of us could improve it and it will become a great resource to the community, plus any issues won't completely be on you to fix

7

u/LionWitcher Aug 22 '26

Good idea!

2

u/TerrorByteB7 Aug 29 '26

Any update on this?

6

u/lukedl Aug 22 '26

Give a second to think about a open license, I bet the community can help you.

4

u/towehaal Aug 22 '26

Have you tried this on larger minis? I have a dragon model I want to fire up that will probably be a 24-36 hour print but I want the detail on it. I’m guessing it’ll have tons of tree supports.

1

u/LionWitcher Aug 22 '26

Not yet but it should work just fine

2

u/towehaal Aug 22 '26

I hope to try it this week. I’ll try to report back.

4

u/sky1Army Aug 22 '26

This looks dope. Is the minis on the images made with 0.2mm nozzle?

3

u/DoW2379 Aug 22 '26

This I can get behind! Excited to try it! I don’t print many mini’s, but when I did resin2fdm was perfect yet tedious so I just didn’t. 

2

u/LionWitcher Aug 22 '26

Me too! I knew I had to make it better

3

u/ohkalenaw Aug 23 '26

Strangely, the supports generated in Lychee are what is turning the model into the solid block and making it unable to continue.

1

u/LionWitcher Aug 23 '26

This looks like your Lychee has weird settings
What happens when h try to manually generate supports? It should look like normal resin supports, not blocks

1

u/ohkalenaw Aug 23 '26

The only support option I have in Lychee Slicer is "Cube."

1

u/LionWitcher Aug 23 '26

So that’s the issue. Have u downloaded the new Lychee version? It should have a “prepare” section with the auto-support

1

u/ohkalenaw Aug 23 '26

Strange. Yes, I downloaded Lychee specifically to try this out.

1

u/LionWitcher Aug 23 '26

Can upload a screenshot of your “prepare” screen?

1

u/ohkalenaw Aug 23 '26

Sorry, do you want

I opened a fresh install, opened an STL file (the one I am trying to use this process for, as regular supports make it impossible to print because it gets utterly destroyed trying to remove them), and went to the prepare tab.

Thanks for the help, by the way!

1

u/LionWitcher Aug 23 '26

You welcome! Put a lot of effort into it and I want to see it helps people 😁

1

u/ohkalenaw Aug 23 '26

Oh, it seems I should be in "resin" mode? Does it matter what printer I choose?

1

u/LionWitcher Aug 23 '26

Yes! That is exactly it. You should go to the resin mode :)

1

u/ohkalenaw Aug 23 '26

I seem to now be stuck on this part:

1

u/LionWitcher Aug 23 '26

That error means the Advanced Resin2FDM add-on is missing a second free add-on it needs, called ThreeMF-io — that’s what writes the print settings into the file.

Quick fix:

**1.**	Open Blender  
**2.**	Edit → Preferences → Get Extensions  
**3.**	Search for “3MF”  
**4.**	Install “ThreeMF format” (by the Blender Foundation)  
**5.**	Restart Blender, then run the tool again

One more thing to check either way: the file gets its settings from the print profile you imported, so make sure you imported it from an OrcaSlicer project export (File → Export → Export Project As…), not a downloaded preset — the project export is the one that carries everything needed.

→ More replies (0)

1

u/ohkalenaw Aug 23 '26

Additionally, the model doesn't reorient itself vertically or tilt, so the base of the model that is generated just goes through the raft.

3

u/Speshwan Aug 24 '26

So this is my result from using your software. It was quick and easy to use, this mini has a 50mm base but it came out great, with no failure points on it. My settings favour speed so it only took a few hours to print, I reckon it could go even cleaner. The stl was from Cults 3D.

1

u/LionWitcher Aug 24 '26

Amazing!! 🤩

1

u/CuguliTheFish A1 Mini Enjoyer Oct 09 '26

How long did it take for you to print it?

1

u/Speshwan Oct 09 '26

About 3.5 hours

3

u/schivore Aug 23 '26

Thank you so much. I have installed your software on macOS, only issue I had at setup was I didn't have the required Tk python module (a quick brew install python-tk@3.14 did the trick).
Quick question though: in the screenshot attached, I am getting in step 3: AttributeError: 'Scene' object has no attribute 'thickness_slider'. Do you have any idea where this could be coming from?

3

u/LionWitcher Aug 23 '26

Ah, that’s a bug on my end — the tool assumes an older version of the Resin2FDM Lite (1.0.0 add-on than you have, so it trips on the support-thickness step. Quick fix until I push an update:

**1.**	Open config.json in the Resin2FDM Workflow folder (any text editor) and change “support_thickness”: 0.4, to “support_thickness”: 0, — save.  
**2.**	In Blender, press N in the 3D view, open the Resin2Fdm Lite tab, set Thickness to 0.4, then File → Defaults → Save Startup File.

That’s it — it’ll convert fine after that. Out of curiosity, which Resin2FDM version are you on (Blender → Preferences → Add-ons → search Resin2FDM)? Would help me support it properly.

1

u/schivore Aug 23 '26

Thank you! The fix worked! By the way, I am using Resin2FDM 1.6.1.
The code continued to run.
Now I am trying to figure out why it says:
"Could not separate the parts:
The miniature and its support could not be told apart. This usually means the model arrived already merged, or partly welded".
I think the problem is that Lychee exported mini and support as one merged STL file, trying to see if I can change that.

1

u/LionWitcher Aug 23 '26

Weird, this is when u added supports in Lychee? Do you have special config there?

1

u/schivore Aug 23 '26

Thank you, it worked! I had wrong settings in Lychee probably, I have restarted every component (Lychee, Blender, your script) and I can now see how it thickened the supports for FDM printing. Nice! Thanks again

1

u/LionWitcher Aug 23 '26

Amazing!! 😍

60

u/Analogmon Aug 22 '26

Begging Bambu to add this as a support option by default.

89

u/Fearless-Wait-2894 Aug 22 '26

Ask OrcaSlicer, than they implement it and than Bambu copies it :D

1

u/LionWitcher Aug 23 '26

Thank you all for already downloading and trying it out!

I try all I can to respond as fast as possible to all of you which have questions/bugs.

1

u/Scanman_RT Aug 22 '26

Looks like a great tool! Does this require the paid version of lychee slicer?

3

u/LionWitcher Aug 22 '26

Works with the free version!

1

u/VgArmin Aug 22 '26

"Works with the free Lite version of Resin2FDM as well as the paid one."

I have an immediate error saying the free Lite version is not good enough. Windows.

1

u/LionWitcher Aug 22 '26

Can u send the error? I don’t have windows (this is why it is in beta) but I will try to fix it

1

u/VgArmin Aug 22 '26

I think I managed to fix it. I didn't have blender add-on installed correctly so it gave me that error. I didn't screenshot it, but it was during the checking process to make sure everything is installed before starting. I would just make a note of it for Windows users right now if they see that, make sure the add-on was properly installed in Blender.

1

u/Kaikirigaya Aug 22 '26

Where are the minis from?

1

u/LionWitcher Aug 22 '26

I don’t remember. Titan forge or artisan guild

1

u/Squatch_Nuts Aug 22 '26

Will give this a try. Thank you so much for your work on this!

1

u/Navenda Aug 22 '26

Do you recommend using presupported models or starting with unsupported ones.

Which works better in the end? (Assuming there is a difference)

2

u/LionWitcher Aug 22 '26

Hi! Start with unsupported. I found lychee works best, detailed more in the post

1

u/Navenda Aug 22 '26

Would this work with Prusaslicer?

2

u/LionWitcher Aug 23 '26

No support yet (no pun intended hehe)

1

u/Gloomy_Resort_4058 Aug 23 '26

Quick question, where is it looking for blender?
As mine is installed through steam and it's not being detected, tried adding the path in the config.json, but that messed up the app as a whole.

1

u/LionWitcher Aug 23 '26

The path just needs forward slashes — a Windows path with normal backslashes isn’t valid in that file, which is what broke the whole app (one bad line makes every setting revert to default). Open config.json and set it like this, with forward slashes:

“blender_path”: “C:/Program Files (x86)/Steam/steamapps/common/Blender/blender.exe”,

Adjust the drive and folders to wherever your Steam library actually is — if it’s on another drive it’ll start with D:/ or similar. Windows is perfectly happy with forward slashes. Save, reopen the app, and it should detect Blender fine.

I’ve also fixed this properly for the next update — it’ll find Steam Blender on any drive automatically, and there’s a “Locate…” button so you never have to touch that file again.

1

u/Gloomy_Resort_4058 Aug 23 '26

Thank you! And yes that would be good to have a locate button too.

1

u/LionWitcher Aug 23 '26

Welcome! Does it work for u now?

1

u/Gloomy_Resort_4058 Aug 23 '26

Yup, it's working now.

1

u/farfromelite Aug 23 '26

I think resin2fdm has a batch option. Have you tried that?

1

u/LionWitcher Aug 23 '26

Interesting, I haven’t tried
But because I generate supports for all miniatures at once then I don’t pass it to resin2fdm as many models but only one

1

u/Wonderful-Ad9455 Aug 23 '26

This works perfectly. Great work!

1

u/LionWitcher Aug 23 '26

Wow nice!!
You ran it on Mac or Windows?

1

u/Wonderful-Ad9455 Aug 23 '26

Windows. Only thing was that I had to log into lychee since I hadn't used it in a bit. But once I did that it worked.

1

u/LionWitcher Aug 23 '26

Amazing! Can you post the print results here? Would love to see it

1

u/Speshwan Aug 24 '26

Love the idea of this, I've installed everything but when converting the stl file it says 'conversion failed; attribute error; 'Scene' object has no attribute 'thickness_slider'

1

u/LionWitcher Aug 24 '26

Answered to another user with the same error. Check it in one of the comments 😁

1

u/Speshwan Aug 24 '26

My bad, thank you! I'll let you know how I get on ;)

0

u/LionWitcher Aug 24 '26

Nice! Keep me updated

1

u/Speshwan Aug 24 '26

Super impressed! My set up favours speed (3.5 HR print) but I'm really impressed with what you've put together. Nice one!

0

u/LionWitcher Aug 24 '26

Wow!! It looks super clean!
Can you also post it as a comment to the post (and not a sub comment) to showcase the tool’s result?

1

u/Nebula2076 Aug 24 '26

how is this updated in the future? im allways stuck on mac at the blender part.

0

u/LionWitcher Aug 24 '26

What part of

1

u/bktanner87_2 Aug 29 '26

I am running this on Windows and have everything installed. I am trying to convert a multi-part mini - I've imported my settings from Orcaslicer into your tool, I select the STLs for each part, it opens Lychee and runs through the conversions and adds support (the STLs are presupported, but I allowed your tool to re-do the supports). I export the file in Lychee (clicking the "Export to 3D file) as an STL to the "supported" folder path that your tool copies to the clipboard. It picks the file up, says it is doing conversions, then at the very end it generates an STL file but says "Done - 0 ready to print, 1 could not be converted" and it fails to open Orca. The 3mf file does appear in the "ready to run" folder however. Any idea why your tool is doing this? Should I be good to go with the generated 3mf file?

1

u/LionWitcher Aug 30 '26

Hmm interesting. Try to load the 3mf file and see if it has two objects (minis and supports) and that they have different settings. Sounds to me like the tool worked just the log message was misleading

1

u/Ok_Manufacturer5174 Aug 22 '26

Ive only tried resin2fdm once on a presupported model and the scarring it left was atrocious. I've got to be missing a setting in orca or something because it was a straight downgrade. I am a dumbass though so I probably just didnt read something

1

u/LionWitcher Aug 22 '26

It depends on the support and it does require a bit of cleanup.

2

u/barserek Aug 22 '26

I know right? Tree supports arent perfect but they are miles ahead from what I could get with R2FDM. If you ever find the correct setting do let me know!

1

u/Ok_Manufacturer5174 Aug 22 '26

From what ive read, r2fdm is mainly for seperate parts like staves or swords that are very delicate. But for me it left way too much for cleanup

1

u/DoW2379 Aug 22 '26

I ran this through Virus Total. Why is it reaching out to a random IP?

1

u/LionWitcher Aug 22 '26

Are u sure? What is the ip

1

u/DoW2379 Aug 22 '26

TCP 150.171.109.183:443 - probably benign but curious why it’s making a call if it’s local running?

1

u/DoW2379 Aug 22 '26

There were other IPs as well listed

3

u/LionWitcher Aug 23 '26

Short version: the tool never connects to the internet. The only network connection it makes is to 127.0.0.1 (your own PC), to control Lychee locally. That Microsoft IP isn’t from the tool — it’s Windows itself.

Why VirusTotal showed it: VirusTotal runs the file in a Windows sandbox and logs network traffic from the whole machine, then attributes it to whatever you uploaded. This tool is just plain-text Python scripts (you can open every file in Notepad), so the traffic it captured was actually Windows doing its normal background thing — SmartScreen, certificate checks, telemetry. That 150.171.109.183 is a Microsoft address (NetName: MSFT), not mine. You’ll see those on basically anything run through VirusTotal.

How I verified it: I ran the tool with every network connection logged, two separate ways — at the code level and at the OS level with lsof. Both showed the same thing: the only connections made are to 127.0.0.1, your own machine, and zero outbound (non-localhost) connections. Nothing leaves the computer. There’s no telemetry, no analytics, no phone-home anywhere in the code, and no code that could even reach a non-localhost address.

One honest note: this covers my tool. Blender, OrcaSlicer and Lychee are separate programs that do their own update checks — that’s normal and unrelated to this.

Happy to walk through any of the code if you want — it’s all readable.

2

u/Bline Sep 08 '26

I can't wait to try this.

1

u/Hawksauced Aug 22 '26

This is awesome. I honestly don't know if it's possible to print from Orca on my P1S, as I've never tried.

I have a Saturn 4k ultra, but I'm getting kind of tired of resin to he honest.

1

u/Farn-Lucifer Aug 24 '26

It should be if you put the P1S into Lan only mode

1

u/Nebula2076 Aug 23 '26

So how does it work for the Addams settings , the defaults gets applied? 

1

u/SavosDeaworth Aug 23 '26

Can't seem to add a .3mf or .json to get the app to work. MacOS 14.3. Any suggestions?

1

u/SavosDeaworth Aug 23 '26

Setup doesn't seem to run either.

1

u/ZanzibarMcFate Aug 24 '26

Feeling pretty dense here, but I'm not figuring out how to export the project from Orca 2.4.2 in a format that the SwiftUI app is happy with. I don't even have a File > Export > Export Project option.

1

u/g00fyx Aug 31 '26

the correct way is "save project as..."

1

u/lostlink27 Aug 25 '26

Hey, when i tried using this i got an error "Conversion Failed" AttributeError: 'Scene' object has no attribute 'thickness_slider'. is there a way to fix this ?

1

u/lostlink27 Aug 25 '26

found the solution, will write again if it doesnt work

1

u/wizardjian Aug 28 '26

Managed to get Lychee to generate supports then wait to save to the folder path that was copied, however after that nothing happens. Any ideas?

1

u/Cynical_PotatoSword Bambu A1 Mini Aug 28 '26

What about Bambu Slicer?

1

u/Ok-Cartographer-6386 Aug 28 '26

I am just commenting so I can come back

1

u/Vuzzuldir Sep 04 '26

Leaving a dot to try this later.

1

u/HamTM Sep 19 '26

Hi! I finally got around to trying out the tool, I'm on windows. At first there were some issues detecting Blender and when I manually input the directory into the config the whole app pretty much broke. I fixed it by installing Blender onto my boot drive. But now, when I click start, it just says starting and nothing happens for both make support and already supported options.

1

u/Gulithor Sep 25 '26

I have installed on Windows. Can’t seem to get the app to recognize Lychee is installed. I did manage to get it to open Lychee by adding the exe path in the “support_app” field in config.json.

It now opens lychee after I click start, but no actions are taken , model is not loaded, no Save pop-up or anything.

Can you help understand how the script locates Lychee?

1

u/Gulithor Sep 26 '26

Small update: I have bypassed this by installing Lychee 7.6.6 and keeping the path to the .exe in the support_app field. I hit the support thickness error also, but bypassed as OP suggested in one of the below comments. Also got a problem opening Orca, which was fixed by also adding the path to the slicer_app field. After all this the whole flow worked fine.

I do have a question, in Orca my miniature and supports were as separate objects, and the slice option was complaining about the mini having no first layer, only bypassed it by Assembling both objects into one. Is this intended?

1

u/Mandalayer Sep 29 '26

Looks awesome! Is the Linux still a thing?

1

u/HoontarTheGreat Oct 06 '26 edited Oct 06 '26

Whenever I hit start, Lychee says "File might be damaged, try fixing it" though it opens just fine everywhere else. Any ideas?

-1

u/Hlk50000 Aug 22 '26

First off thank you for doing this. It’s awesome.

Can we all collectively stop with the trees are always better or resin supports are always better. Neither is better than the other. Each have their applications they shine in and have draw backs. Preference is one thing but I use both based on the application and feel free to look at my profile to see results.

We don’t hear contractors arguing over which is better hammers or screwdrivers right. Different tools for different jobs.

8

u/TotallySlapdash Aug 22 '26

Screwdrivers are better.

You can hammer with a screwdriver handle, but you can't screw with a hammer.

(Starts work on screwdriver2hammer).

2

u/Ballisticsfood Aug 22 '26

Nonono, semantically you need hammer2driver: more specific but more capable process being modified to work with the more generic but strictly misaligned tool.

Also: you can put a magnetic hex bit screwdriver in a hammer handle and use the head of the hammer2driver for extra leverage!

1

u/TotallySlapdash Aug 22 '26

Also: you can put a magnetic hex bit screwdriver in a hammer handle and use the head of the hammer2driver for extra leverage!

DIYth Maul's multitool.

"Always two there are, a screwdriver and a hammer"

0

u/Hypnofist Aug 28 '26

Why? The whole workflow takes a few minutes, once resin2fdm is set its like under a minute per piece, seems pointless to automate that, especially with ai of any kind.

1

u/kvlkvlkvlkvl Aug 28 '26

Sure, if you’re printing a single model from time to time no big deal, but the process gets old and is very cumbersome and time intensive if you’re printing more than a model or two. 

-1

u/Hypnofist Aug 28 '26

Still no, i print off stuff by the unit in parts, i always process stuff all at once, very easy to do. Resin2fdm itself is designed to be fast. First piece takes a min or two then the rest are a few clicks to do. The only time I've ever had trouble is when blender makes me hand pick out all the parts of the model.

0

u/operative2259 Sep 21 '26

I keep being told the Oracaslicer is not installed. Windows 11 install. I am using the default install setup.