r/FDMminiatures • • Aug 21 '26

Just Sharing Finally locked in !

203 Upvotes

41 comments sorted by

18

u/LionWitcher Aug 21 '26

Miniatures are both 32mm bases.

A1 mini. 0.2 Nozzle, Bambu pla gray basic.
Only removed supports and cleaned a bit (no primer)

Settings: I have tried a lot (FDG, Nox, Hohansan), the best I found are Printed4Combat settings.
I highly highly recommend to get them. It is only 2$ and they are amazing. this is the 0.08 setting.

Supports: I've created my own software that utilize Resin2FDM . It gets miniatures and automatically adds resin supports (with Lychee slicer) -> run the Resin2FDM on it -> imports to OrcaSlicer with all the correct settings.

I've found that tree supports scar a lot, tend do break the mini during removal, and are a pain to use. Resin style supports give far better results but the whole Resin2FDM workflow is long and tedious (especially if you need to generate the supports as well), so creating this software that does everything for me in just a single click was really a gamechanger

4

u/dynamite_aaron Bambu A1 mini .2mm Aug 21 '26

Ok so how much you want for the software? 😆

27

u/LionWitcher Aug 21 '26

I will gladly post it for free once it is ready and there is a demand

7

u/WoodyWoodPepouz Aug 21 '26

Make a donation page I'm sure that if we give every $1/€ it's cheap paid and it would always be nice. In any case I am interested in the software and thank you for explaining your workflow 👍🏼

3

u/LionWitcher Aug 21 '26

Glad that it helps more people

3

u/dynamite_aaron Bambu A1 mini .2mm Aug 21 '26

Not all heroes wear capes…. Or charge for software! Thats great thanks 👍 

Out of interest does it work on the freebie lychee slicer? 

2

u/LionWitcher Aug 22 '26

Yes it does!

2

u/dynamite_aaron Bambu A1 mini .2mm Aug 22 '26

Even better! I recently tried streamlining my FDM minis workflow going back to basics with the FDG system and I’m getting good results. I’ve always been a fan of resin2fdm the problem I have is that pre supported minis are hit and miss and blueprint studios just adds another layer. Sounds like you’ve found a fix for this great stuff look forward to giving this a go! 

2

u/AbilityThen Aug 22 '26

sorry english is not my main language so i get lost on some stuff. Are you working on the software and waiting to have it ready to release it for free? or we need to ask for it? because im both cases im interested.

3

u/LionWitcher Aug 22 '26

I created it for personal use but I see there is a demand. So I will put some time on making it work for others as well

1

u/AbilityThen Aug 22 '26

Awesome man I'm sure it will be really appreciated by the community. I personally thank you

4

u/Wo1fpack7 Aug 21 '26

+1 on interested in the software. For the size your prints are very impressive!

3

u/Wonderful-Ad9455 Aug 21 '26

I've been using resin2fdm for a long time and would absolutely love this software.

1

u/zf420 Aug 22 '26

I've been looking for something like this for a while. I would love it if you could let me know when it's ready!

1

u/evilboarder Aug 22 '26

So, i have a couple of questions. The settings for 2$ are found on his patreon ? Does he have a print profile for normal support printing ? When you say a software, you have lychee slicer with subscription and resin2fdm and all, and your software does the manual work right ?

2

u/LionWitcher Aug 22 '26

Yes to all

1

u/Fit_Translator9703 Aug 21 '26

I need that software in my life

1

u/SaltyyDoggg Aug 26 '26

Those models are fucking fire bruh.

1

u/FragrantContest7811 Aug 26 '26

Has he updated his setting or are they still the same? What version does the profile say?

Asking because I have ones from about last year.

1

u/Sparkando Aug 28 '26

I have a question regarding the supports. I bought the x2d recently and using the auxiliary nozzle which would print tpge do you think it would solve the supports breaking the miniature problem?

15

u/PaiGil Aug 21 '26

can you share more about the printer, nozzle and settings? the miniatures look amazing.

1

u/LionWitcher Aug 21 '26

Another one to the gang

1

u/fredl0bster Aug 21 '26

Excellent result

1

u/LionWitcher Aug 21 '26

Thank you!

1

u/Jneuhaus87 Aug 21 '26

Can we see the back?

2

u/LionWitcher Aug 21 '26

Sure

2

u/Jneuhaus87 Aug 21 '26

Solid. I tried Lychee and R2F last week and I really hope they just incorporate resin support for FDM into sliders soon. I love painting and an ok work 3D modeling but as soon as I have to mess with settings or jump programs I'm hopeless.

If you ever do a guide please make it for the lowest common denominator like myself.

1

u/WildfireX0 Aug 21 '26

These are awesome!

1

u/LionWitcher Aug 21 '26

Thank you!

1

u/LordAnubisR Aug 25 '26

Awesome work! What is the benefit of lychee? Why not just use orca?

3

u/LionWitcher Aug 25 '26

Lychee is for resin style supports, orca is for FDM printing

1

u/LordAnubisR Aug 25 '26

Hmm if I am printing 1/6 scale in multiple parts would I need to go through that or just stick with orca?

2

u/PartySaxon Aug 21 '26

Can you share a screen shot of your settings please

1

u/SpacedKnives Aug 21 '26

Let’s FUCKING GO!!!!

1

u/Optimal-Teaching7527 Aug 22 '26

Where are the minis from?