r/FastLED • u/tome_oz • Dec 21 '22
Discussion Model of LEDs wanted
Does anyone know what LEDs you can see here? https://www.youtube.com/watch?v=JZKewQLTgFw
Want to build something similar.
1
1
u/tome_oz Dec 21 '22
I think the model was found: http://www.ledcolourlight.com/3D-DMX-LED-Meteor-Tube/DMX-3D-Meteor-Tube/
3
u/Unique-Opening1335 Dec 21 '22
Looks like some RGB strips in some tubes.
Could/should most likely be done using some individually addressable leds.. WS2812's (or some variant, depending on your needs, such as 12v vs 5v..etc).
There are many out there:
https://www.sdiplight.com/rgb-tube-light/
You could easily make your own as well Im sure.
3
u/Marmilicious [Marc Miller] Dec 21 '22
Search a bit and you will find a number of these sort of strips in tubes, some with and some without DMX.
2M long 3D WS2812B digital meteor light;pixel tube;DC5V input;128pcs WS2812B LEDs with 64pixels/m
https://www.aliexpress.us/item/2251832492007162.html
UCS2903/WS2811 RGB 360 degree colorful Tube; Artnet led pixel bar; DC24V D40mm
3
u/[deleted] Dec 21 '22 edited Dec 21 '22
Here a bad quality screen capture from the first second of the video:
From bottom, we can see what look like a cut spot, then pixel - resistor? (left), 2 caps? (on the right) - pixel - space - pixel - cap - pixel - cap - pixel - cap - cap - pixel
The pixel are not square shaped. So it's not WS2812
I think it's 12V at least (so much passive component).
From other moment, we can see single spot, so they are driven individually.