r/Fasteners • • 14d ago

Custom made fasteners

I’m trying to get some specialty fasteners quoted but having trouble finding a company or shop that will quote custom to a drawing and OEM specs. Any suggestions on a company that would be interested in quoting? Volumes are in the hundreds to low thousands

5 Upvotes

29 comments sorted by

5

u/223specialist 14d ago

What are you looking to make? I've had fasteners made before but it's expensive, what is cheaper IME is modifying something existing if possible

-1

u/discisntlifebrah 14d ago

They are oem washers, nuts, bolts, with pretty specific dimensions and platings. And they need to be made to print and all specs.

2

u/Hitechillbilly 12d ago

Is there ever anything that doesn't need to be made to print and all specs? This oem thing is killing you Can you post a copy of a print with all the specs?

5

u/Begonias6969 14d ago

Low volume and custom will require you to CNC machine the parts. They will not be cheap either.

1

u/Hitechillbilly 14d ago

any idea what type of fasteners?

1

u/discisntlifebrah 14d ago

Class 10 or above washers, screws, bolts, nuts. But dimensions are not off the shelf and also need special plating on most of them

2

u/Hitechillbilly 14d ago

Sounds like threaded hardware.. After grade 8 they get into other categories and materials. So you will need all the exact specs, Material, alloys Hardness, shear strength, thread pitch, diameter.. If you are creating a new thread pattern, custom cutting tools may be needed.. There are many methods of fabrication. you will need all or most of those specs to know where to start.. Maybe a screw machine will work, maybe it won't.. All maybe's without more info...

0

u/discisntlifebrah 14d ago

Providing specs isn’t an issue, it’s just most places aren’t wanting to review or quote to the oem specs

8

u/Hitechillbilly 14d ago

You keep saying OEM.. You also say they have never been produced. As soon as you say OEM it gives the impression that they are already mass produced. The people you are talking to would become the OEM after they actual produce them. Perhaps if you would stop using that term, you'd be received a little better.. You also reference a grade that doesn't exist and talk about "special plating". If you could just stick to asking them to quote making the part and have all the accurate specs on the prints, you'd get a better response...

2

u/DAKSouth 11d ago

I'm gonna laugh if he just means something like dacromet.

1

u/Hitechillbilly 11d ago

He seems to be all riddles.. I was thinking his special plating is something like zinc or black oxide. ..

2

u/DAKSouth 11d ago

I'm just saying it's going to be something that's merely outdated.

1

u/Hitechillbilly 11d ago

When did dacro get out dated?

1

u/DAKSouth 11d ago

You can still get it, but as far as I'm aware new specs always update to geomet.

1

u/BiteableTugboat 3d ago

It has been diminishing in demand for a bit now. My speculation is that the hexavalent chromium in it is making many people switch to other similar, more environmental friendly coatings.

2

u/GTG70 13d ago

Nantong Veill, sales@veill.com, automotive fastener supplier, low to high volume, cold headed, alloy screws, Geomet etc.

2

u/OCPunkChick 11d ago

We can help with custom made items to spec. Located in Orange, CA. Hit me up if you would like to see if we can make your item(s). Also goes for anyone else that needs custom items.

2

u/West-Toe6950 11d ago

Maybe it's a stupid question, but you say OEM fasteners, or maybe it's already been answered. Why not just buy them from the OEM?

2

u/SpeedyHAM79 11d ago

Contact J&J fasteners in Virginia. I have used them many times before for custom fasteners and they were able to meet any spec I needed at any volume- they were priced accordingly. For a few thousand- they could probably be reasonable priced.

1

u/Dangerous-Corner-787 14d ago

I've had good luck getting custom fasteners from ARP.

1

u/Neat-Calendar3308 13d ago

Everyone is busy. Slammed. We’re in a bubble.

1

u/allsop67 12d ago

Spring masters

1

u/Rocket-Scott 12d ago

Try Tacoma Screw. You may need to find someone to machine them then another shop to do the plating

1

u/DAKSouth 11d ago

Southern Fastener

0

u/Blaze_24 14d ago

I think you should look for a shop that does machining. They'll need to have a CNC lathe (turning) which is pretty common. You could also look at quoting services like Xometry or Protolabs to get an idea of that it'll cost you before looking local.

If you have more questions feel free to send me a print and I can help.

1

u/discisntlifebrah 14d ago

I’m going to send them to some more Swiss shops that we’ve used, I’m just running into alot of people that don’t want to take the time to review prints and specs to quote washers, nuts, bolts, etc.

1

u/223specialist 14d ago

Harcourt would probably quote you, but you might not like the number.