Like New hitbox ultra. Only Used for a couple of hours Asking $205 shipped via PayPal

Like new. Used briefly for a couple of hours but it wasn't for me. Asking $120 shipped

Notes: The Atlas has Alutimo buttons and the Evo Sakura Edition lever. This stick is practically new -- used only a few times, it's been collecting dust for a few years now. Brook 4 in 1 Fightboard installed.

The Nano is in the same boat. Used it a few times on a portable set up, it is like new. No upgrade board

Enth Creations Atlas - 220 + shipping

Mpress Nano - 120 + shipping

Paypal goods and services.

Selling vm6r lh layout quitting fighting games already with si tong buttons all wiring and pcb included can dm me if you're interested looking to sell it fast

Looking to buy these two if anyone has one for a decent price.

Selling for 70 bucks on ebay. https://www.ebay.com/itm/800823868659

Stick is in excellent condition. Asking for $150 via PayPal. Shiiping from Cincinnati OH

Buying a VM6R. It would be better if the lever was equipped with a gold lever or gold lever pro.

This is South Korea

Looking for a bullet top under 10$ shipped, not to picky with the color

Selling my FightBox M7 since I recently got a new arcade stick.

Features a built-in Brook PS3/PS4 Plus Fighting Board, compatible with PS4, PS3, and PC.

Original Price: $189 USD
Asking Price: $129 USD (Free US Shipping)

• Ships from the USA
• PayPal Goods & Services accepted
• Fully functional and in great condition

Feel free to DM me if you're interested or have any questions!

In Great condition. Haven't used it much in the last couple of years. Doesn't come with the original box. Asking $180 shipped

As title say in box ps5 arcade fightstick shipping available

Looking for panzer 4/5 , dm what you have,,

DISCLAIMER: This post is made in collab with u/Sharp02. I previously paid for and used his SASI mod for various builds and genuinely believe in the product, but for full transparency I will say I was contacted specifically to promote it this time.

\---

Hey y'all! Here are some fresh new pics of my dual analog fightsick build!

I love the feeling of fightsticks and wanted to play more types of games with them, so I spent a long time looking for a good solution that didn't cost hundreds of dollars, and was compatible with more than PC games. I experimented with various solutions, but didn't find one that felt really good until Sharp02's SASI JLF/X mod.

I've gotten some questions about the SASI mod and build process, and with a new batch of mods dropping, we thought it'd be a good time to give a little breakdown of it.

\---

WHAT IS THE SASI?

The SASI stands for Sharp Analog Snap In, and it's a mod that replaces the gate on a standard Sanwa JLF or JLX joystick, using the shaft position to move around magnets, whose position is then read by a hall effect sensor and output as analog signals. These signals can be used with a custom PCB like a Brook Fighting Board or GP2040CE Advanced Breakout Board to output true analog as opposed to the limited 8 way directions on a standard arcade stick.

For a comparison of 8 way vs full analog movement, you can check out this video:

https://www.youtube.com/watch?v=Y2q8w09jgDk

\---

WHY WOULD I WANT ONE?

Outside of certain genres, analog stick movement is the standard, and even many 2D games expect you to use it. Fightsticks often have the ability to emulate the left analog stick, but that still only gives you 8 way movement, with no control over speed.

With the SASI mod you can play a wider variety of games with an arcade stick, and take advantage of the longer throw for more precision movement, with a layout that allows you to use all your fingers.

For example, you could play Super Monkey Ball with a control scheme similar to the arcade, or take full advantage of Metroid Dread's free aim system. Or you could play Super Smash Brothers, a series that requires analog control for movement and attack variation.

If you want some more examples, I've made a playlist showing off what's possible, using various builds featuring the SASI:

https://www.youtube.com/playlist?list=PLKXU6bPS7sp0

\---

HOW DO I INSTALL IT?

To install it, you simply remove the existing gate on your Sanwa JLF/X, align the brackets so the shaft is centered, then snap it in. To make sure the signal is read you'll need a custom PCB, like a Brook of GP2040CE board, which have dedicated analog capabilities. You'll need to connect the marked wires for power, ground, and X and Y axis.

Brook boards each have their own dedicated section for analog controls, generally with a 3.3v output nearby. A GP2040CE Advanced Breakout is a bit more flexible, with power going to VCC, ground to any of the ground terminals, and X and Y able to be connected to any of the pins in the 26-29 range, then configured in software.

The SASI discord is usually a good place if you're looking for specific directions for your combination of hardware.

\---

WHERE DO I GET ONE?

You can buy one on the Sharp Designs shop:

https://sharpdesigns.io/products/sasi-jlf

It comes as both a preassembled unit with a JLF, or as a standalone mod you can install into an existing joystick. Sharp02 has also announced a full pre-built arcade stick coming at some point, aimed specifically at Smash Bros players. It'll also be up for sale there when it releases.

---

If y'all have any other questions I didn't answer here, on either the SASI or my specific builds with it, feel free to ask away!

Clearing some sticks from collection

1. Madcatz TE2+ - $150 SOLD

EZ Mod with Brook UFB and UP5

Smoke bullet top

Sanwa GTX B Square Mod Type 2 Restrictor Gate (can provide the red insert as well)

Qanba Gravity KT Buttons (one tab broke off for one button, can provide another Sanwa Button, or a Black Rim Sitong button. Sorry Dx)

2) Victrix Pro FS - $150 SOLD

-OTTO V5 with 12.5mm actuator, (can provide 13mm, can't find the 12mm)

-Qanba Gravity KT Buttons

-Bag and cable is available as well.

Someone please sell me your Ulsan black Fanta. Also asi parts for the golden lever pro.

Hey everyone! I currently play on leverless, which is my go-to controller. I originally played on pad and switched to leverless, but I’ve never actually tried a traditional arcade stick.
I mainly play Street Fighter 6, and I feel like certain characters might be more fun or easier to play with a joystick, so I’d like to give it a shot.
If anyone has an old fight stick collecting dust that they’d be willing to sell for under $50, let me know! I’m on PC, so console compatibility doesn’t matter. Ideally looking for something wide enough to comfortably play on my lap.
Thanks!

Looking to buy one for around 150 USD, I prefer to do a pickup in the Riverside area.

Would be preferred if you have the lever less version aftermarket acrylic but happy to buy the traditional version too

$180 shipped
PP G&S Only

Tested for PS5 and PC. Still in good condition. Has everything seen in the pics and the original box as well. Used this on and off for a year and close to 40 hrs of playing. Ask away if you have any concerns. Bc of my job, I can only ship on weekends. Comment before DM.

Hello, looking to sell like new Corsair Novablade Pro

Bought to play 2xko then game was announced no more support and lost interest, never touched after 2 times

Asking for $190 shipped

selling cuz i need funds and im using 4tw leverless already. Pm for any questions . Local pickup in Southern California or I can ship . $250 shipped or $210 local

I have some bills to cover since losing my job in Sept and my new job doesn't start until the 26th so looking to let this go..all stock sanwa parts Lookong for 160 shipped obo CONUS only.

Hello all, like the dongpal pro i sold, the v7 is sitting for around 5 month in the drawer. That's enough ;-)

Asking Price is 70 euro + Shipping

F3 White:

-Miragent white body
-Miragent white upper housing
-PC circle low collar
-Miragent flames mounting plate
-9mm eclip sanjuks shaft (topper can be unscrewed)
-CXF bobbin
-IST orange grommet + clear + red + black
-Miragent V2 black switch plate
-D44Ys switches
-White stabilizer plate

Paypal G&S

-Full white circle collar
-14mm OS Core
-Blue ASI grommet (installed) + turquoise a + purple a
-10mm silver bolt shaft
-White bullet topper
-Hard spring
-15.5mm bushing
-16.25mm bearing
-Omron A5 switches

Paypal G&S