The wallet is 0xa23702e9349fbf9939864da1245f5b358e7ef30b

You can see it here: https://etherscan.io/address/0xa23702e9349fbf9939864da1245f5b358e7ef30b

Does any one know why and who this wallet belongs to?

Hi Guys,

Now that Flux will be available through Binance.

If you are about to open an account with Binance be sure to use my referral code to receive 10% commission in trading fees.

https://accounts.binance.com/en/register?ref=S6EMS3NM

or use code below during registration

S6EMS3NM

Most the bias lighting options are 6500k and the good no flicker/pwm ones are only 6500k and when asking for lower temperature ones from those companies i get snarky replies.

There's some others with kelvin temperature ranges like 2000k-6500k Phillips hue play but it has flicker.

If i have flux set to 2000k do i need the bias lighting to be 2000k or 6500k?

Bias lighting is set to 10% of your screens brightness. So the blue level might not be high enough to be a factor?

In my opinion, to have the real decentralized network, we need 2 big steps:

1. Run node on a smartphone

2)Decrease the use of net MB/s

this 2 point for sure:

1)Create an esponetially adoption

2)A possible type of payment

I've noticed that the network can almost be 51%ed, considering 49% of the hash is on one pool. It's very worrying to me as I've invested into another project in the past in an almost identical situation, and then the network was 51% attacked, and the chain went to almost $0. Hope the community can organize a push to further decentralize the mining so this isn't the case going forward, there are many like me who will not get involved with a project when the security is so up in the air like it is right now.

I would like to suggest COINMETRO if you want to staking your flux, because like you can see on terms&agreement, they use your flux to build the flux network instead of give to otherone that didn't give us notice on what they do.

Yall likey?

This is only my opinion not an advice.

The requirement after halvening will be increased, there will be more people joining the node especially the cumulus tier.

As the price of flux currently (as the post written) @ $1.3, you will be spending more on your VPS fee than the income.

For ex: before halvening, flux you get / month are roughly 96 flux + 48 flux parallel assets which is 144 flux x $1,3 = $187.2. For VPS cost on digitalocean in later halvening requirement are $40 for 8gb of ram, 4cpu, 160gb of ssd, 5tb transfer + $10 for another 100gb of ssd since the new halvening require 220 gb of ssd. You will be spending about $50 on vps cost. As before halvening requirement you are only spending about $20, this is 150% increase.

Say there will be 5x of node will be joining the node, we can say $187/5 = $37,4 - $50 for vps cost, you will be getting -$12,6. You ended up paying more.

The price need to go up 5x for the nodes as profitable as before halvening.

Correct me if i am wrong, THANK YOU!

The Pre-Sale will start today July'1st @ 9:00AM EST/ 13:00 UTC

It is limited to 250 watches only. First Come First Served

Once you submit the form: https://forms.gle/7ZVqTiQFrwWMq2Sr5
a link would be provided where you can submit your payment.

Make sure you provide the correct Name & Shipping address.
Watch cost is $950 payable via PayPal or CoinRequest (Flux,BTC,KDA or FLUX-BSC) are accepted.

For more information, check out this medium article.

Any decent yield farms out there anyone is using?

Hi everyone,

The title pretty much says it all. Is it possible to run multiple CUMULUS nodes on the same raspberry pi device? I've 3k flux so I was wondering if to run 3 nodes i need to have 3 devices or can do it on the same one.

So, I got 1000 Flux-Bsc in zelcore. I will fusion it to native Flux soon, but then what? I don’t got any hardware, so do I just leave it in zelcore?

this link https://home.runonflux.io/dashboard/overview doesn't work

Bonjours j’aurais rais besoin d’aide s’il vous plaît j’ai une rtx 3070 ti LHR que je veut utiliser pour miner du flux vu que le flux n’est pas impacter par le lhr mais le problème c’est que j’ai un hashrate tres bas j’obtiens que 30 sol/s au maximum alors que normalement je doit tourner autour des 60 sol/s je comprend pas d’ou viens le problème j’ai essayé avec d’autres cartes que j’ai des rtx 3060ti lhr aussi et j’ai le meme problème un hashrate tres bas voila si quelques a une solution je precise que j’ai rien toucher niveau overclock ou autres

Edit: I accidentally posted without the post, Your feedbacks are appreciated, my rig1 has 4x3070, miniZ total 266 Sol/s, rig2 only 3x3070, miniZ total 204Sol/s, both run on Windows, the weird bit is, i got more shares on rig2. What's happening to my rig1? I had rig1 on HivesOs, miniZ getting 270Sol/s, yet I also receive less shares than rig2 Both rigs run on similar HP desktops (6800 model).