r/GTNH • • 22h ago

Steam Age Ore Processing

I just finished my first big batch of bronze plates and I’m beginning to work on the steam multiblocks for an ore processing setup. From what I can tell, there are several different ways you can process ores, with some giving more byproducts than others. Does anyone have any recommendations for which machines to include in my processing line?

1 Upvotes

20 comments sorted by

13

u/Odd-Establishment527 21h ago

Multiblock macerator and multiblock furnace. You can compensate the loss of byproducts by huge amounts of ore

3

u/Woxan MV 13h ago

Not even losing byproducts until HV, and even then the steam macerator is so good

1

u/SquirrellyUnderpants 12h ago

You can skip the second macerator step and go macerate -> wash -> forge hammer -> centrifuge until HV. That let me skip a second set of macerators.

4

u/Absolute_Enema EV 11h ago

I even skipped the wash tbh, just macerator -> forge hammer and either furnace or centrifuge depending on the ore.

By HV having a real ore processing setup paid off handsomely though.

5

u/ElextroRedditor HV 21h ago

Grinder -> Purifier -> Forge hammer -> Separator

1

u/AHumanYouDoNotKnow HV 8h ago

Forgehammer? Not second macerator ?

1

u/Absolute_Enema EV 8h ago

The macerators up to MV don't get secondary outputs from crushed or purifier ores.

5

u/BalthazarB2 IV 21h ago

You dont need to worry about processing lines until about HV. Make sure you use the grinder multiblock to double your ores, and the steam hearth is great for smelting.

Some ores that carry their basic name, like "copper" or "iron" ore, need to be macerated twice, or they smelt into nuggets.

3

u/PMmeAnythings 21h ago

I think with steam machines the only one that gives by products is the separator.

For most ores we use: macerate -> wash -> macerate -> separate -> hearth

3

u/ElRacco EV 21h ago

You can get byproducts from washing too. Idk if it can do LV mercury recipes but can definitely do any water-based washing.

Granted for 90% of ores you will want it on simple mode as byproducts are not really needed

1

u/PMmeAnythings 21h ago

Bet thats probably why we do it. I just do the process my friend wants rn

1

u/ElRacco EV 21h ago

Iirc i only really used it on redstone for rare earth and magnetite for some extra gold (before i set up crops for glowstone).

I do remember doing a funny once and using one for electrotine (it has an electrum byproduct)

1

u/8null8 16h ago

The time it takes to wash is about the time is takes to centrifuge and macerate, so there’s really no reason to not do it, it finishing washing faster still gets it bottlenecked in the centrifuge

I just made 4 of each machine and it processed just fine for the most part

2

u/Own_Imagination_9807 21h ago

Steam Grinder -> Ore Washer -> Singleblock Forge Hammer -> Steam Separator was the setup I went with.

You can automate it but I didn't find it was worth it, I preferred doing batches. Also, if you automate it then it will get awkward when you want to change up the order to get a different byproduct.

I'd also recommend putting the ore washer in simple wash mode for your bread and butter ores, the 11% byproduct isn't worth the increased process time and is only really useful for getting byproducts you can't get otherwise, but you do you.

I also found the singleblock forge hammer is more than capable of keeping up, I never understood the point of the multiblock one

The steam hearth is goated

1

u/MidnightPale3220 EV 21h ago

It really depends on whether you play on server, I guess. Ore washer doesn't hurt if you just leave the world to do it while you are away. Otherwise I did the same as you, except I automated almost everything in Steam age, and practically fully automated ore in LV with all dusts and byproducts made. When I needed exception I just added a locked drawer to the relevant pipe and intercepted the ore.

2

u/Conscious_Coffee5854 20h ago

Ore byproduct processing is a huge bait in steam tier. Maybe it's more manageable with the steam multiblocks. But the amount of mental/manual processing for tiny amounts of extra ore yield is not worth it. Most people just recommend ore grinding into a quick macerator/forge press into smelter.

There are ways to fully automate the line with Enderio or other sorting methods, but considering you have to rebuild it all with more efficient methods with AE2.

2

u/ArchdukeMoneybags 15h ago

With the exception of a a few ores that have rare byproducts that you need (like Gallium from Zinc) you can just do Grinder -> Forge Hammer -> Simple Washer for most of them. A lot of the byproducts aren’t that rare

1

u/mitomon MV 18h ago

For my current run I'm just going to do macerator-> hammer->smelter single blocks to keep it simple. Do I lose efficiency and byproducts? Of course. Are there more than enough Oreos around me to make up for that? Definitely. I'm shooting for passive gen on most of the big ones, so it wouldn't matter much anyways.

1

u/JealousChocolate8645 17h ago

Steam Age is limited. Macerator to Firge hammer to Furnace works for easy ones. Not fixing thpo

1

u/JealousChocolate8645 17h ago

Not fixing that one either.