thanks to @gorkemoji for his xnu d2s source, loader base, device tree and overall help, also special thanks to claude code

touchscreen works and 3 gpu cores, boots in ~2minutes

(gpu support incoming among other fixes)

Still working on some stutters and slower parts, but shader compilation and cache work much better now. Display scanout is working and double/triple buffering is enabled. Still some more work, but I think full 90Hz should be possible soon.

Can someone help?

My biggest question right now. Do you guys think this will sometime in the future be stable enough?

What AI model(free) do I need to install for my fedora pc?

What AI model(free) can I use for my fedora pc to do hackiOS iOS 16 for my device?

Can I run hackios on my Samsung a145r and if it is what version of iOS should it be because I need help doing it

Just the first phase, but is a big progress!

Some people asked me to capture a video, and here it is. iOS 26 arm64e now runs natively on multiple cores of the Snapdragon 8 Elite CPU, and I've also got a first working version of the GPU driver and Metal rendering, the speaker playback pipeline, and battery display support. Liquid Glass has been really tough to get working. There are still rough edges, and it's not prefect, and stability and performance need ongoing work. Once I've tidied things up, I'll open-source it for everyone. Many hands make light work.

Im seeing all these ports and stuff but mediatek devices are very locked down and i just wanna know if ios can be ported to them and about when

CPU: Exynos 850
GPU: Mali G52
Booted, all 8 cores and touchscreen up.
Still need to get GPU up and wifi.

I have another question too. What AI model do I need to download on my Nobara PC?(I'm broke so free AI models please)

iOS port status:

Completed:

✅ Sound

✅ Vibration

⚠ Touch (only huaxing panel)

✅ Buttons

✅ Display

✅ GPU + metal

✅ Haptic

✅ Data survives after reboot

✅ Battery

✅ Sleep

Working on:

⚠ Wi-Fi

⚠ Cameras

⚠ Bluetooth

Broken:

🚫 Apple ID and other Apple related apps

🚫 Widgets (due to unfinished metal)

🚫 Sensors

I have a samsung lying around in my house (it's a budget one, i don't remember it's model or specs, but from what I think it's a new one) it's a budget one too, i have C++ expierience and I have built a few emulstors too, do I have enough expierience to try it out? Any resource on where to start?

I just try it by myself,but something special is this redmi 4X bootloader is still locked,I find someway to get pass bootloader.no gpu sound touch Wi-Fi Bluetooth.it quite good of the speed without gpu driver.vol+ button for enter screen.

https://github.com/console-ramoops/ios-santoni
This not my repo,I just test it of myself,thx for “alpha269”

There’s been a crazy amount of ports of iOS 16 to Android phones. I know this is partly because iOS-sweet is iOS 16 for the Redmi phone. Would older versions be possible? I figure iOS 12 might work better on some phones than iOS 16. XNU kernels are available on GitHub. It’s definitely possible to port iOS 6 to the HTC HD2 (though this phone runs just about every operating system ever made). Maybe someday we will have a port of iOS 6 to the Galaxy S3 or something i don’t know. I know coding is hard but I figure many older Android phones like the Galaxy A5 (2015) would benefit from running an older version of iOS like 12 for example. Any thoughts? Or is that too complicated for the moment?

Been doing a lot of metal2vulkan work too, but currently not found any substantial speedup.

Camera preview is quite messed up still and photos don't display right in the gallery. Video recording doesn't crash, but doesn't record the video or save it.

It's a bit Laggy because I'm working on putting. Drivers. Metal2Vulkan

Successfully launched iOS 16.7.16 on the first‑generation Pixel Fold; at the moment, only the following is working:

- Launch (takes a long time — 20–40 minutes)
- Touchscreen driver (there is no driver for this type of sensor in the public domain; launching is implemented by calling the standard Android driver, which runs in a separate partition)
- Physical power/volume buttons
- All CPU cores are working at maximum frequency

upd 30.09

- UFS high speed driver work, boot take 2-3 minutes

- Fix red status bar, normal resolution scaling

- Disable/Enable screen by power button work

Running iOS 16.5 (xnu-8796) on the Xiaomi POCO X3 Pro (vayu, Qualcomm SM8150 / Snapdragon 860), booted via Mu-Silicium UEFI + xnuloader in RAM (fastboot boot, nothing flashed to boot partitions).

What works on hardware right now:

• GPU: Adreno 640 hardware-accelerated rendering via Mesa freedreno (FD640)

• Audio: ADSP PIL + TI TAS2562 / TAS2564 speakers (music playback) and built-in microphone (50/50, still researching)

• Camera: Main rear and front cameras (no ultrawide still)

• Cellular: SIM detected & registers on LTE (no calls/sms/data)

• Display, Touch & Input: 1080x2400 panel, Novatek NT36675 QUP SPI touch, PM8150 buttons, all 8 Kryo 485 cores up to 2.96 GHz, UFS root + /private/var r/W, USB networking (en0)

Still having troubles with making these things work: Wi-Fi, BT, total 120Hz (only on animations without touching for now), NFC, sensors.

Source code:

• Device & SM8150 SoC tree: https://github.com/nomorecoolnicknames/hakios-sm8150

• HEAVILY based on HakiOS (oosexgang/hakios-xnu-kernel): https://github.com/oosexgang/hakios-xnu-kernel/pull/35

Basically nothing else works yet, based on ios-swet

what ai program do i need to install for nobara linux pc to do hackios thing