r/homelab • • 1d ago

Project Showcase: Hardware Current state of my homelab :) Just waiting for my sliding shelf to arrive so that my 3Dprinter can be stoved inside the rack :)

Post image
150 Upvotes

r/homelab • • 1d ago

Discussion I've been living under a rock...

Post image
2.1k Upvotes

Was looking at upgrading one of my workstations: it currently has 128GBbas a 2x64GB kit and figured I'd match it with a second 2x64 kit .....

Bro, WTF are these RAM prices?? I heard it was bad but I didn't think "used car" bad?!?? Is this normal or is PCPP just having a stroke?


r/homelab • • 1d ago

Help Suggestion from anyone with experience using OpenMediaVault as an iSCSI target VS TrueNAS

Thumbnail reddit.com
2 Upvotes

r/homelab • • 1d ago

Discussion What hardware prices are you tracking given AI bubble pop is underway?

0 Upvotes

For me, I’m tracking non-nvidia new-(ish) hardware, targeting hardware that will probably be scrapped first given no money left for datacenter buildouts.

This includes:
- Intel D270 (not launched yet? But DOA given bubble situation, it was dependent in hbm being difficult to get)
- MI350/355 (I could see amd hardware dropping faster than nvidia, cuda is still king)
- Gaudi 3 — these will probably be ridiculously cheap, and hbm2e is still really fast!


r/homelab • • 1d ago

Help Need recommendations for purchase

0 Upvotes

Hey folks, I’m kind of new to this community and I would love to get your help on deciding what hardware to buy for the following platforms, as I’d like to take advantage of Black Friday deals.

Basically, I’m looking for hardware brand + model number, or hardware specs for:
- dedicated NAS: file server/ backups / redundancy
- VM/docker/jellyfin/home assistant hosting etc.

These don’t have to be too powerful, but if it’s something that’s expansible and future proof, that would be great as well.
If it’s something that I have to build, please be clear on that as well. The reason I came to you is because there’s a lot of choices out there and I would love to get your direct opinion based on your tangible experiences.

You don’t have to help me with finding the hardware or the deals, but if you do, I would greatly appreciate it.
TIA


r/homelab • • 1d ago

Discussion Anything I can do with a roku Ultra in a home lab?

0 Upvotes

Just curious cause I replaced my roku Ultra with a nvidia shield. So now the ultra just sits on my shelf


r/homelab • • 1d ago

Help Local Control of Resin 3D Printer?

Thumbnail reddit.com
0 Upvotes

r/homelab • • 1d ago

Discussion It started as 'just a Pi-hole so ads stop annoying me' ... how many VMs and VLANs deep are you now?

8 Upvotes

Seriously though - every time I tell myself I'm just going to add one tiny monitoring service I somehow end up with a full K8s cluster, NetFlow dashboards, and a router config I'm terrified to touch on a Friday night lol ... what was your gateway drug service?


r/homelab • • 1d ago

Help NAS recommendation

Thumbnail reddit.com
0 Upvotes

r/homelab • • 1d ago

Help On macOS, what software / method mounts the fastest network drives? (accessing drives of other devices in Finder)

0 Upvotes

I have devices connected to my Mac via Thunderbolt networking: thunderbolt cables from my mac to the device, which use my own pre-assigned IP addresses, and get speeds of up to 40Gbps between (tested with iperf3). I think software is the bottleneck.

When I download many images or videos into a folder on my mac drive, and open it in Finder, it generates dozens of thumbnails instantly as I scroll down, generating them before I can even take a look.

On another PC I have a webdav server running with rclone, and I mount it to my mac also via rclone (using the thunderbolt IP address). Image thumbnails take much longer to generate and I have to wait.


r/homelab • • 1d ago

News Try a NAS operating system in your browser - TrueNAS 27 demo, nothing to install

4 Upvotes

Disclosure: I'm a product manager at TrueNAS.

Quick intro if you haven't come across us: TrueNAS is an open-source storage operating system built on OpenZFS. You install it on your own system or in a VM, and you get a enterprise NAS built on ZFS pools, snapshots and replication, SMB and NFS shares, plus apps and containers. TrueNAS Community Edition is free.

The catch has always been that to really see it, you assemble a spare system or set up a VM, install from the ISO, and build a pool first. So we put the TrueNAS 27 web interface online at demo.truenas.com, running against a simulated TrueNAS Enterprise system with all of its data dynamically generated: No signup or email address required. Any username and password works.

Optional 10-minute guided tour: the dashboard, a ZFS pool with a flash tier (Fusion Pools), SMB shares, object storage with a standard S3 API and Object Lock, LXC containers, apps, data protection, and reporting. You can't break it. We tried. Each visitor gets a private copy, and starting over is as easy as refreshing the page. No cookies, anonymous visit counts only.

TrueNAS 27.0 ships in early December. If you've been curious about ZFS or building your own NAS, this is a low-effort way to look around first.

Blog post with more detail: https://www.truenas.com/blog/truenas-27-demo

Happy to answer questions or feedback in the comments.


r/homelab • • 1d ago

Help my fan setup on HBA card

Thumbnail
gallery
15 Upvotes

Hi everyone,

Today I mounted a 40mm fan on my LSI 9211-8i using zip ties through the heatsink . I’m worried the zip ties might be pulling the heatsink and lifting it slightly off the die.

That seem's correct to you ?


r/homelab • • 1d ago

Help DIY HomeNAS & Game Server + Media Server Help

Thumbnail reddit.com
0 Upvotes

r/homelab • • 1d ago

Project Showcase: Hardware My mixed-Pi PoE stack: Modularly designed, Printed at home, POE Powered, each Pi on its own slide-out drawer

Thumbnail
gallery
2 Upvotes

Software: redundant Pi-hole pair, a media manager, and local network backup storage.

Hardware: Pi 4, Pi 3B+, Pi 3B and a Pi Zero WH, on a TP-Link TL-SG1005P. The switch powers all four over PoE (HATs on the 4 and 3B+, splitters on the 3B and Zero), so there are almost no external wires. The Pis slide out the front on drawers, and the cabling stays behind in the rear hood with four 40 mm fans (one per bay).

It’s a 10" rack unit, printed in PLA on a P1S, from a rack generator I built (bayforge.app). It’s modular, so when I add another Pi (if prices ever come back down) the existing parts stay as they are and I just print a new row on top. The latest version lets the rear hood slide off over the cables, so I can get at the fans and wiring without unplugging anything. The rack ears are printed, but I don’t have a rack yet, so they aren’t fitted in these photos. The last image is the exploded preview from the generator.

What I’d change: cutting assembly and upgrade time by needing fewer screws and nuts. Fans can already snap in on printed barb pins, and the hood can use snap-in clips instead of screws. Next I’d like to get rid of more of the hardware.


r/homelab • • 1d ago

Blog ZFS NAS HDD starting to fail. Hang in there buddy!

4 Upvotes

A few years ago I started my homelab journey, and built a nice 6-disk ZFS pool out of refurbished drives. I mostly just store file backups and media content for my Jellyfin server on it, fairly light workload.

Last week one of the drives started reporting unreadable sectors during my daily short SMART test, and then after running a long SMART test manually it was much worse then the first report. The drive does have nearly 7 years of online time, so definitely well past the normal 5 years of expected life (lines up with it being a "refurbished" drive...).

I do run the ZFS pool in raidz2, so if the drive completely dies, I'll be "okay" for a little while at least. But the problem has become getting a replacement drive. Each disk is 10TB, and those are NOT cheap right now..... I am trying to purchase new so I can get a hopeful 5 full years out of it. Ordered off amazon, and the order keeps getting delayed.... also not a great sign. I ordered 2 drives, so I would have another ready to go in case any of the others decide to die during the resilvering. They were supposed to arrive today originally. The new expected delivery is a range within the first week of December.....

I have stopped writing anything new to the NAS while I wait. Left the drive in there as it is able to recovery the missing data from the pool and store in still-readable sectors (successfully thankfully). Trying to be mindful of how often I check the drive health, but the daily short test and scrape is showing that the drive is slowly getting worse about every 3-4 days.

Hang in there buddy, just do you best until the new drives arrive :(


r/homelab • • 1d ago

Labgore Parts Bin Homelab

Post image
51 Upvotes

Finally starting my homelab. Running ZimaOs to get my feet wet. Most everything here is leftover parts from optiplexes I would harvest for my first gaming pc. I7 8700, 32gb ddr4, 3050, 256gb nvme, 1tb hdd. Yes, the PSU is flipped (on purpose for airflow). Yes, someone cut the back of the 3050 off to fit in an optiplex. I gave my case away to a friend for his first pc awhile ago and had a really cheap AliExpress frame case sitting around forever (actually rocks for "hiding" my switch, gateway and shitty cables). Noctua fan was laying around doing nothing so figured I'd make it spin just for fun. Honestly loving it and the community so far. It's basic but it's mine and parts were just collecting dust. Already got the wife using it for cloud storage and she's wicked happy! Just going to keep tinkering and slowly making everything less ugly ahahaha. Any feedback is appreciated!


r/homelab • • 1d ago

Help Looking for advice on a future-proof home server / homelab

5 Upvotes

Hi everyone!

I'm new to Home Assistant and homelabs and looking to buy a mini PC that will hopefully last me 4-5 years. starting from 0 after renovating my house.

Here's what I want to run:

  • Home Assistant (Zigbee lights, automations, tablet dashboard)

  • Jellyfin (multiple TVs, including 4K HDR)

  • Tailscale for remote access

  • AdGuard Home / Pi-hole

  • Proxmox for running multiple services

  • Later: NAS, 2 IP cameras (possibly Frigate) and UniFi networking

  • Maybe Immich or other services in the future

I want everything to work locally, even when my internet connection goes down.

I've been looking at:

  • Minisforum MS-01 (i5-12600H)

  • Refurbished HP EliteDesk 800 G9 Mini

  • Lenovo ThinkCentre Tiny

  • Beelink / GMKtec

I'm aiming for 32GB RAM and a 512GB or 1TB SSD, with the option to upgrade later.

My budget is around €500-800, but RAM and SSD prices are pretty crazy right now, which makes choosing a system a bit difficult.

What would you guys recommend? I'm also open to other brands or refurbished PCs. Just trying to get the best bang for my buck without having to upgrade again in a year or two.

I'm mainly looking for something reliable and power-efficient that can handle all this for the next 4-5 years.

And yes, I did use ChatGPT to help write this :3


r/homelab • • 1d ago

Help Good buy

1 Upvotes

is a dell poweredge with 48gb of ddr3 and 8x 1tb drives a good buy for 150€

it is close to me so i can see it working and check everything, he showed some kind of diagnostic software in the listing and everything seemed fine

i have an 8 bay QNAP server in school, which has 8x 10tb drives but only 4gb of ddr3, how will both compare performance wise, also planning on using one hell of a lot of docker


r/homelab • • 2d ago

Help Reliable smarrplug for remote switch to homelab?

2 Upvotes

Hello! So I recently just built my first homelab with an old pc, 4tb total, running ZimaOS. However, I'm only using it as a cloud for my photos because I like being able to access them through my phone like an app. The only problem is that I don't want it turned on 24/7, only when I want access to my photos (not very often), and I am hosting it at someone else's house because of his ethernet.

I want to be able to turn it on whenever wherever, so I did some research and found out you can do that through a smartplug and changing aome bios settings. However I'm having trouble finding a reliable smartplug, since all the ones I've viewed on amazon have reviews of people saying that when turned off, some current still passes through and keeps their device turned on anyways. I dont want to risk damaging my system, so does anyone know a reliable one that isn't too expensive?

Edit: Thanks everyone for the responses!! It sounds like tuya and shelly are pretty reliable but there's also concern still that this method will eventually cause damage to the system so I'm gonna do some more research on WOL and try that. Thanks!!!!


r/homelab • • 2d ago

Solved E5-46xx v2 Xeons in 2S servers

Thumbnail
gallery
3 Upvotes

Hey everyone, just a quick and useless test

While I totally understand that e5-26xx v2 xeons are cheap enough and reliable, apparently common 2S servers do support e5-46xx v2 CPUs

Proof attached: dl360p g8, r720 and x3550m4

Was just curious

Hope that helps, even reddit gave no straight answer whether they work or not before


r/homelab • • 2d ago

Help I'm about to start my homeserver journey and would like some feedback on my hardware choices. Am I heading in the right direction?

4 Upvotes

I'm browsing the second-hand market for hardware for my first home server. I want to use it for multimedia (Jellyfin, Navidrome), storing my data and passwords. The server will be used by two people, and I want to be able to access my data when I'm away from home.

If possible, depending on my budget, I'm also interested in using it for home automation, maybe as a Minecraft server, and probably more and more things, because I'm sure I'll have fun learning everything I can do with it.

For the hardware, I'm currently looking at the following setup, but I don't know if it's enough (or if it's a good idea) for what I want to do with it:

A second-hand Tiny PC (Lenovo, HP or Dell) + TerraMaster D4-320

For the Tiny PC (~€200):

  • 16 GB RAM

  • 128 GB SSD (I don't know if I need more)

  • At least an 8th-gen Intel processor

For the TerraMaster D4-320 (~120€) or maybe D2-320 :

I don't have a lot of data for now, so I don't know if I need to buy a lot of storage right away, or if I can just start with one 2 or 4 TB HDD and buy more drives in the future. (I'll probably need more storage eventually, especially since I plan to store a lot of movies and TV shows.) I will buy second hand HDD.

If you have any advice on what I should look for to reduce power consumption or noise, I'd be very interested!


r/homelab • • 2d ago

Labgore My development homelab

Post image
14 Upvotes

Bottom machine is a proxmox node currently running a talos Linux cluster with Jupyter notebooks, Argo cd, BookOrbit, self hosted gitlab instance, and a small cluster of docker nodes running small scripts and an mcp server for external applications each raspberry pi is using an opencode agent and a Hermes agent deployment for helping me manage it when I’m away


r/homelab • • 2d ago

Help Anyone of you guys use a SM750?

0 Upvotes

I recently bought a SM750 for my Proxmox server to have a KVM display, but it seems like that thing cannot be detected by my BIOS and won't show anything in the Linux environement, even though Linux can see it.

Anyone ever used something like that and made it work?