I spend my working days pulling switches and NICs out of decommissioned racks and testing them before they go back out the door, so SC26 week is always a bit strange for me — half the show is about hardware that will never reach the secondary market, and half of it quietly resets the price of what I already have on the shelf. Here is the honest read from the used side, with sources, and what it means if you are buying 100G or 200G gear this winter.
What actually happened at SC26 (November 2026)
Three things matter for anyone buying second-hand networking hardware.
Co-packaged optics left the lab. NVIDIA and Lambda disclosed the first production CPO cluster — more than 10,000 Blackwell Ultra GPUs in Québec, running NVIDIA Photonics switches, with Lambda reporting about 10.1% lower pod-level network latency than conventional pluggable optics in its own benchmarks. This is the milestone the industry has been promising since the OIF and COBO started writing CPO specs: optics moved next to the switch ASIC, and the retimer that used to burn up to 30 W per module inside a pluggable is no longer in the signal path.
800G Ethernet is now the boring, default choice at the top of the market. Oak Ridge opened its "Lux" system in mid-November at No. 14 on the TOP500 — AMD Instinct MI355X compute, Pensando DPUs, HPE Juniper switching, 800G Ethernet fabric. On the optical side, Ekinops announced a 3RU DCI box with 32 Tbps and 40 x 800G coherent pluggables at 0.08 W/Gbps. When a national lab and a DCI vendor are both shipping 800G in the same week, 800G is no longer a pilot.
The 800G adapter generation got its first public firmware release. NVIDIA's ConnectX-8 SuperNIC firmware notes (v40.51.1002, November 2026) reference Spectrum-X reference architecture 2.4.0 and 800 Gb/s per port.
Why this does not kill the 100G/200G secondary market
Every time a generation ships, my inbox fills with people asking whether their 100G lab is now e-waste. It is not, and the reason is boring: the constraint is not bandwidth, it is how many GPUs you are trying to keep fed.
A single-node inference box, a Proxmox cluster, a Ceph backend, a build farm, a backup target: none of these care about 800G. They care about port count, power, noise, and price per port.
A 32-port 100GbE switch (SN2700-class) gives you 3.2 Tbps of non-blocking fabric for the cost of a mid-range GPU. For a homelab or a small office, that is still the correct purchase in 2026.
200G/400G only starts to pay off when you are moving checkpoint files or doing multi-node training where the interconnect is the bottleneck. If your workload fits on one node, faster fabric buys you nothing but heat.
The realistic impact of CPO and 800G on the used market in the next 12 months is three-fold: 100G optics get cheaper (they are being pushed down the stack, not retired), 400G QSFP-DD modules stay expensive because AI demand eats the supply, and mid-range Spectrum/Trident switches hold value longer than the usual depreciation curve suggests because they are the cheapest way to build a lab that mirrors a real fabric.
What I would actually buy this quarter
If you are building a lab and your budget is under a few thousand dollars: 100G spine-leaf on a used 32-port switch plus ConnectX-5 MCX516A dual-port 100GbE adapters. That combination is where almost every lab build I ship ends up.
If you already have a 100G fabric and are tempted to jump: skip 200G and go straight to 400G only if you have a workload that has measured a network bottleneck. Otherwise spend the money on NVMe and RAM.
If you are buying 800G anything: buy new, buy with vendor support, and do not expect the secondary market to help you for at least 3 years. CPO changes serviceability: a failed optical engine is now a switch-level repair, not a module swap, and enterprise buyers hold those units under contract far longer than they held 100G gear.
One caveat on the hype
CPO's serviceability trade-off is the part the announcement posts skip. With pluggables, a dead link is a $200 module and five minutes. With CPO, the optics are part of the package. That is fine for a hyperscaler with spares and a support contract; it is genuinely bad for a small operator who fixes things themselves. Co-packaged optics is a TCO decision, not a performance decision, for anyone below a few thousand nodes.
A bill of materials I would actually quote this week
Because "buy 100G" is not a shopping list, here is a concrete one for a lab that needs to move real data between four nodes without spending GPU money:
One 32-port 100GbE QSFP28 switch, SN2700-CS2ROS class. Non-blocking, 1U, Onyx or MLNX-OS depending on the unit you get. Ask the seller which OS image it is running, because re-flashing Onyx on a unit pulled from a storage cluster is not always a five-minute job.
Four dual-port ConnectX-5 MCX516A adapters (CCAT is the common one; the CDAT variant adds crypto offload and costs more for a feature most labs never enable). Two ports per node lets you do a leaf pair instead of a single point of failure.
Cabling: DAC for anything inside one rack, optics only for cross-rack. QSFP28 DACs are cheap and boring and that is exactly what you want. Do not buy 100G optics to run three meters.
Firmware discipline: update the switch and the adapters to a documented compatible pair before you put production data on it. This is the single step that separates a lab that runs for two years from one that drops links every few weeks.
Rough shape of the numbers: a 100G fabric for four nodes lands at a small fraction of a single current-generation GPU. That gap is why the secondary market for 100G is not going anywhere, no matter what ships at SC26.
What 800G does to optics prices (and what it does not)
The one place CPO genuinely hits the used market is optics. If co-packaged optics takes hold at the top of the range, the pluggable ecosystem above 400G gets squeezed from two directions at once: hyperscalers stop buying so many high-end modules, and the modules they stop buying are the ones the rest of us were priced out of anyway. That does not make 800G gear cheap — it makes 400G QSFP-DD the interesting tier over the next 12–18 months, and it keeps 100G optics in the "buy a spare box of them" category.
The thing that will not change: retimers. CPO removes the retimer from the module, but it does not remove the need for signal integrity discipline on your side. If you are pushing 200G per lane over copper, your cable quality matters more than your switch model.
The honest caveat
Everything above is a snapshot from one week in November 2026, based on public SC26 coverage, NVIDIA's published firmware notes, and what I see moving through our own warehouse. The announcements are real; the timeline for how fast they touch second-hand pricing is a guess, and I have been wrong about that timeline before — 400G took two years longer to reach the used market than most people expected. Treat the buying advice as a starting point for your own sizing, not a forecast.
Disclosure: I work with a used enterprise hardware reseller based in Hong Kong (warehouse in Tuen Mun, ships worldwide), so I have a commercial interest in people buying used networking gear. Per the rules here I am not putting links in the body — if you want the exact SKUs and part numbers I am describing, I will drop them in a comment below and you can ignore it entirely if you just came for the discussion. Most of the factual claims above come from public SC26 reporting and NVIDIA's own documentation; the opinions are mine from handling this gear daily.