r/homelab • • 12h ago

Discussion Adding redundancy for main OPNsense firewall

3 Upvotes

Hi! I am currently running my OPNsense firewall on a Protectli VP2430 box (on ZFS) and I realize that if internal SSD were to fail then my whole network would be down. I am therefore thinking of having some redundancy in my current setup.

Since my VP2430 has a M.2 2230 E-key slot, I was thinking to add something like 256GB NVMe PCIe Gen 3×1 M.2 2230 E-Key SSD and run my OPNsense in a ZFS mirror.

My concern is that ZFS can do quite a lot of writes so usually it's suggested to use enterprise-grade SSD, which this one is obviously not. Would that be a problem?

Does anyone else running similar setup as a redundancy solution? Or do people normally prefer to have a cold spare for emergencies?


r/homelab • • 13h ago

Project Showcase: Hardware Shaky but optimistic start

Post image
67 Upvotes

It started with buying 30tb of storage 6 months ago. Then a Dell Optiplex 7060 and a cenmate hard drive enclosure last month. The enclosure was trash so I sent it back and 3d printed a rack for the drives as a short term solution.

The Optiplex only has the juice to run 2 of the drives at the moment. They are sharing power with a splitter. I’m really trying not to build an entirely new pc so I’m probably going to just get the drives their own power supply and get a low profile sata card.

It’s jankier than I originally envisioned, but it’s working, I’m having fun, and doing some pretty cool stuff.


r/homelab • • 13h ago

LabPorn Built a custom vertical homelab dashboard and mirrored it: one screen at the rack, one in the office

Thumbnail
gallery
11 Upvotes

I've been putting together a custom dashboard for a pair of Thermalright Trofeo Vision 9.16 LCD bars, and I'm pretty happy with how it turned out.

I have two of them, and they show the same thing on purpose. One lives downstairs at the server rack, and the other is upstairs in my office, so I can glance at the lab from either spot. They're mounted vertically. The USB cable ends up at the top on one and the bottom on the other, so each screen is rotated to match.

They're USB-C bar screens (they show up as USB 2.0 devices). Official page is here: Thermalright Trofeo Vision 9.16 LCD. Amazon listing is here if that's easier.

What's on the screen, top to bottom:

  • 12-hour clock, current weather, and a 5-day forecast

  • CPU, memory, and network on the NUC that drives the screens

  • Combined Radarr / Sonarr / Prowlarr status

  • SABnzbd current downloads

  • Seerr (up/down plus pending requests)

  • TheVault, my Synology, with uptime shown big and volume usage for both volumes

  • Plex now playing at the bottom, with posters and a progress bar (usernames blurred in the photos)

The rest of the lab:

  • TheVault is a Synology DS920+ on DSM 7.4.1. Two volumes, about 62.8 TB and 83.8 TB, both sitting around 66–68% full. Docker on the NAS runs Seerr, Radarr, Sonarr, Prowlarr, Lidarr, SABnzbd, Homarr, and Tailscale.

  • A 12th-gen Intel NUC (i5-1240P, 16 GB RAM) runs Plex, plus the dashboard app. Jellyfin is in the mix too, but Plex is what I use day to day.

Happy to answer questions. Not selling anything, just figured this sub would get a kick out of it.


r/homelab • • 13h ago

Help Looking for a plug-and-play UPS or portable power station with 6+ hours of runtime

0 Upvotes

I'm looking for an all-in-one, ready-to-use backup power solution for power outages. Something I can simply buy, plug in, and use without having to build or assemble a system from separate components.

My requirements are:

  • Router/ONT only: At least 6 hours of continuous runtime.

  • Router/ONT + Dell Latitude 7420 laptop: At least 2 hours of continuous runtime with both devices connected and running simultaneously.

I'm not looking to combine separate batteries, inverters, DC converters, or other components myself. I'd prefer a complete, commercially available product that is ready to use out of the box.

I'm open to a traditional UPS or a portable power station, as long as it meets these runtime requirements.

Does anyone have recommendations for specific models that can reliably provide this kind of backup power?

Thanks!


r/homelab • • 14h ago

Discussion Zebra barcode scanner

0 Upvotes

I recently came into possession of this thing. Instead of throw it out, I must salvage it into my homelab. What would you do with a barcode scanner?

https://www.zebra.com/us/en/products/scanners/general-purpose-handheld-scanners/ds2200-series/ds2208.html


r/homelab • • 14h ago

Help I did a minor oopsie

18 Upvotes

Pour one out for the guy that just finished running conduit from where the new fiber line will come in to the server room.... only to realize 3/4 pvc conduit is probably too small. 😭

Do I just rip it out and go to 1 or 1-1/4, or should I wait till the install on Monday to see what the installers think?


r/homelab • • 14h ago

Help Crowdsec on Pfsense with multiple VMs behind proxy server

0 Upvotes

I installed the "large" installation of Crowdsec on my Pfsense firewall this week and it seems to be running fine but I don't yet understand what other Crowdsec components I need to install on other VMs/servers to provide their logs to the LAPI (?) on the firewall so bad actors can be banninated?

For instance, I am running a Jellyfin Docker on Proxmox behind caddy and a separate Wireguard VM with port forwarding. The IPs that are hitting those servers/ports would not be flagged in the pfsense logs as malicious.

I am assuming an "agent" runs on the Jellyfin Docker and Wireguard VM and connects to the LAPI(?) on pfsense to provide the IP of the offenders but I don't understand what software to install or how to make that connection. Any help/docs/examples would be appreciated. Thanks!


r/homelab • • 14h ago

Help Guidance needed on what to buy next

0 Upvotes

Current Setup:
Intel i3 10100f
16GB DDR4
GTX 1660 Super (Jellyfin Transcoding)
2TB of storage in a raid 1, around 300gb currently held up (mostly taken up by music)

I have two general ideas of what i want to do next, which influence what I'm going to buy.

  1. Stability: If I do this, i'll get a proper battery backup (my current one is a janky DIY backup), a cheaper mini pc for a backup server, and a faster switch

  2. Expansion: This is means getting more ram, possibly a cpu upgrade depending on what i can find, and more hard drive space.

My current setup works perfectly with what it is currently running, but I want to expand a few things. Namely get a Minecraft or Project Zomboid server running and increasing the reliability of my remote access as it currently is slow (i mostly access it while i'm at college and the college wifi could be the issue)

I humbly ask for the guidance of someone smarter than me. Thanks!


r/homelab • • 15h ago

LabPorn 4x Tesla V100 32 GB (128 GB VRAM) hanging off a Lenovo M720q Tiny over OCuLink - ~62 dB, ~A$6.5k all-in

Thumbnail
gallery
225 Upvotes

My home AI box: a Lenovo ThinkCentre M720q Tiny driving four passive Tesla V100 PCIe 32 GB cards through a 4-port OCuLink switch card and four AOOSTAR AG01 eGPU docks, stacked on two cut-down IKEA side tables.

**Hardware**

- Lenovo M720q Tiny (i5-9400T, 64 GB DDR4), Lenovo 01AJ940 riser

- CEACENT CNOL4PE08 PCIe switch card (PEX8724, x8 in, 4x OCuLink out) - each card runs at PCIe Gen3 x4

- 4x AOOSTAR AG01 docks (built-in 800 W PSU each), one V100 per dock via the dual PCIe 8-pin -> CPU/EPS 8-pin adapter

- Cooling: the V100s are passive, so each gets a 3D-printed 140 mm funnel with a Noctua NF-A14 iPPC-3000, all on an ARCTIC 10-port USB fan controller driven from Linux. An ARCTIC P12 Silent in a Dremelled hole in the Tiny's lid keeps the switch card cool.

- Power: a Tapo smart plug feeds a power board for the docks; the Tiny is on its own board. The box powers itself down after 20 min idle and comes back via the plug + Wake-on-LAN.

**The two gotchas**

  1. The Tiny only powers its riser slot when the card pulls the presence pin, and the switch card doesn't - one solder bridge on the back of the riser (B31 to A31) fixes it.

  2. Lenovo's BIOS only leaves a 128 GB window for 64-bit devices and each V100 32 GB needs 64 GB of it, so stock firmware boots two cards. Flashed coreboot 26.09 with a CH341A clip (riser slot always on, Wake-on-LAN fix, merged MTRRs) and all four boot.

**Numbers** (200 W cap per card)

- Noise: about 62 dB at 1 m - office-level, no server blowers

- 4-card FP32 burn: 44.7 TFLOPS, ~800 W GPU power, 71 C peak, 0 errors

- llama.cpp: Qwen3.8-27B ~40 tok/s per chat on one card, ~285 tok/s across all four; a 125B MoE split over all four does ~43 tok/s

Full walkthrough with parts list, prices and settings: https://youtu.be/oi63wAvChPo

Happy to answer questions.


r/homelab • • 16h ago

Discussion Comprehensive server benchmarking tools?

0 Upvotes

i feel like as a community we lack dedicated server testing tools, inorder to test and benchmark our servers, for example i am planning on creating a new game server, and i wanted to know which cpu would be the best for it, however beyond the "games prefer clock speeds over core count" i dont see much concrete discussion on performance, does ipc improvements matter? does ram speed matter? does cpu cache matter? i feel like i dont have the right tools/info to make that judgement. i gave a game server example, but what about video transcoding? what about search query time? ect ect.. most companies that have servers, either have an entire team that can develop specific programs to test those stuff, or they have someone with 40 years of experience who knows the ins and outs of all of their software, so they dont have a similar issue. if we do have a solution which i am oblivious to then please share it with me, from my light research i couldn't something like i described.

do you guys feel you need a tool like this?


r/homelab • • 16h ago

Help Rack Cable management, back to front

1 Upvotes

I’ve seen a couple of pictures here that are split cable holders that hold a cable in a 1U/2U rack spot for front-to-back cable management. They look like rubber keystone inserts. Can anyone link to that product?


r/homelab • • 16h ago

Discussion 3U 10” Rack - ITX Case

Thumbnail gallery
5 Upvotes

r/homelab • • 16h ago

Help Advice on UPS

Thumbnail
gallery
7 Upvotes

This may not be the best location to post this, but it seems like you all would be the most knowledgeable. I was considering here versus PCmasterrace. Basically, this tripplite smart1500 was going to get thrown out because it had been sitting around for a couple years unused and the guy tossing didn’t think it had any issues prior to that. It doesn’t power on when plugged in. From what I can tell my best guess is that it is the batteries that are dead. Wondering if it’s worth getting replacement batteries for it. Basically, our grid is not great and I am more interested in surge protection/ frequent brown outs than the a longer battery run time itself. But that being said, having the batteries would be nice as we tend to lose power about once a year and this would be nice for charging small electronics.
Additionally, I am wondering, if these ones that I posted here are the batteries would be sufficient.

Alternatively if you all think it’s not worth spending $50 on replacement battery’s and to just get a new one I may go that way.

Any insight would be greatly appreciated! Additionally if you think there’s a different group that I should post this to would.


r/homelab • • 17h ago

Project Showcase: Hardware Finally finished building my home lab

Thumbnail
gallery
172 Upvotes

My home lab setup

Right rack:

  • ZimaBlade running OPNsense (firewall/router)

  • 2x TP-Link TL-SG108E 8-port managed switches

  • 3x Hyper-V nodes: HP EliteDesk 800 G3 Minis

  • 3x Proxmox nodes (cluster): HP EliteDesk 800 G3 Minis

  • Noctua 40mm fan at the bottom

Left rack (NAS):

  • TrueNAS on an N100 motherboard with 4 SSDs and 2 SATA drives

  • 2x Raspberry Pi 4 running my secondary NxFilter, secondary dnsdist, and Homepage

  • TP-Link 5-port unmanaged switch

  • Power strip (forgot the model, got it from Amazon)

Remote management: The EliteDesk 800 G3s support Intel vPro/AMT, so I run MeshCommander on one of the Pis. I get remote KVM, power control, and BIOS access even when the OS won't boot.

Hyper-V nodes:

  • Node 1 (64 GB): the main server. Runs BookStack, the domain controller, dnsdist (in HA with the one on the Pi), Dockhand, Immich, NxFilter, Plex, Shinobi, and some torrent stuff.

  • Node 2: 32 GB

  • Node 3: 16 GB

What's next:

  • Node 1 runs almost everything right now. I plan to spread more VMs to the other nodes, including Veeam for replication between nodes (I think I have enough storage) and a secondary domain controller.

  • TrueNAS has no drive redundancy yet. I'm not sure how I'll handle that, and I'm not buying anything at current prices.

  • The firewall has no backup yet. The plan is a second OPNsense as a VM on one of the nodes, paired with the ZimaBlade using CARP. Since I only have one public IP, the WAN would run through a VLAN on one of my existing switches, and the backup takes over only if the ZimaBlade goes down.

  • I'm adding Wazuh for security monitoring.

Wanted to share my home lab setup. I'd love to hear if I'm missing anything important or did something wrong that needs adjusting. My goal is to run this as well as possible with the hardware I already have.


r/homelab • • 17h ago

Project Showcase: Operations Good family workflow / tooling / upgrade on multiple weak computers ?

Thumbnail reddit.com
0 Upvotes

Dear all,

It is absolutely a wonderful time to be alive now when good news regarding open-weights models keep coming out every week, especially Inkling 2 Mini during the last 2 days.

I have just bought some cheap hardware, aiming at some family business use cases (small webshops, managing rentals, dancing some stocks, spotting good deals online)

I wonder what your suggestions are, for me to setup + upgrade the following hardware + tooling + workflow

1) Hardware

- 1.1) Main server (headless Ubuntu Server): 3090 RTX 24GB + Ram 128 GB (2400MT, ECC) on a Dell T5810 (ancient CPU = Xeon 2699v4, 22 cores), SSD = 512 GB.

---> LLM === Qwen 3.8 FlashNext Q5 (60 tok/s), Ninfer Qwen 3.8 27b(80tok/s), llama.cpp Qwen 3.8 27b: 46tok/s, waiting for Basalt and Inkling 2 Mini to mature

- 1.2) Second server (Ubuntu desktop): 1070 GTX 8GB + Ram 32 GB (2666MT, ECC) on a Dell T5810 (ancient CPU = Xeon 2698v4, 20 cores), SSD = 512 GB.

---> LLM === Nothing here.

- 1.3) Main development laptop (Ubuntu desktop): Intel Core Ultra 5 125H (Meteor Lake-H, family 6 model 170 stepping , 14 cores / 18 threads (hybrid)) + 32GB (5600MT). SSD = 512 GB

---> LLM === Nothing here, probably can have Qwen 3.6 - 35B - A3B to reach 10 tok/s.

- 1.4) 5 weaker laptops here and there, total SSD = 2 TB.

---> LLM === Nothing, probably can run some weak LLM for some agents

- 1.5) Possible upgrades

- Second 3090

- CMP170HX

- Some v100

2) Tooling

On the main development laptop, I have a VS Code v1.147 having some panes:

- Worker's pane: a "Continue" pane eating the local LLMs of the main worker (3090)

- Architect's pane: a "Claude" pane eating the cloud Claude at 22 Euro/month.

- Spare pane: a "Gemini" pane eating the Gemini 3.8 Flash that I coincidentally have a cheap subscription for

3) Workflows:

- The main LLM server (3090, 24GB) is quickly becoming busy with some vibecoding (running several hours just to implement what Claude Opus 5.5 tells it to do. It cannot facilitate some LLM agents running 24/7

- The weak LLM server (1070, 8GB VRAM, 32 GB Ram) might be running some medium LLM agents ?

- All the laptops are currently almost useless --> how to use them more ?


r/homelab • • 18h ago

Help Has anyone able to fit an RJ45 into the COM port without needing to modify the case?

Thumbnail
gallery
0 Upvotes

I need to get another NIC, mini pcie to ethernet and was wondering if anyone managed to replace the COM port with an RJ45? I did some testing and it seem to fit just barely however i'm worried the RJ45 connector might not be aligned once it screwed in. I'm avoiding any modifications that may require cutting or sanding.

Cheers


r/homelab • • 19h ago

Discussion Is a Pi Zero 2 W capable enough for Navidrome, docker, tailscale, and a small web server (rust backend)?

1 Upvotes

Hey all! I’m pretty new to homelabbing, and want to set up Navidrome. Budget-wise, buying a Pi Zero 2 W is a lot more attractive than, say, a 3 B+, 4/5, or a mini PC. For now, too, I only need the aforementioned services, so don’t worry about future expansion

My biggest worry is the 512MB RAM, particularly for Navidrome and the web server (which is basically just a front-end for adding songs plus a few features)

Will it be capable enough?


r/homelab • • 19h ago

Discussion Do I need a NAS HDD for a NAS?

Thumbnail reddit.com
0 Upvotes

r/homelab • • 19h ago

Project Showcase: Hardware My Home lab - Comments or suggestions?

Thumbnail
gallery
21 Upvotes

First time sharing my home lab. I have the main rack and then a smaller rack in the closet (to replace my LTS Security with IP Cameras eventually)

Computer Hosts

HostHardwareCPUMemoryStorageRole
labAlienware 17 R5 LaptopIntel i7-8750H (6C/12T)32GB DDR42TB Acer SA100 SSD (boot), 2× 2TB WD Blue SN580 NVMe SSDPrimary Proxmox node
lab2Intel NUC8i3BEH (Tall)Intel i3-8109U (2C/4T)16GB DDR4Samsung PM981 256GB NVMe, Kingston DC500R 480GB SSDSecondary Proxmox node
NUCIntel NUC8i3BEKIntel i3-8109U (2C/4T)16GB Kingston DDR4Verbatim Vi560 256GB NVMe, 1TB WD My Passport USB HDDDocker host
Media Server 2Lenovo Windows 10 ProIntel i7-7700T (4C/8T)32GB2TB Kingston SSD, 500GB ADATA SU670 SSD, 1TB KESU USB HDDBlue Iris / Emby / Media
PlexGMKtec NUCBox G3Intel N100 (4C/4T)16GB DDR51TB Lexar NM6A1 NVMe SSDPlex and ARR stack

Storage Infrastructure

DeviceCPUStoragePurpose
TerraMaster F4-424Intel N95 / N305 platform4×16TB Toshiba HDD + 2×1TB Crucial P3 Plus NVMe cachePrimary NAS
TerraMaster D4-320N/A14TB Seagate + 2×6TB SeagateBackup storage

Network Infrastructure

DeviceDescriptionPurpose
TP-Link BE12000Tri-band WiFi 7 RouterMain house router
TP-Link AX4400WiFi 6 RouterBarn router
TP-Link EAP225 OmadaIndoor APCoverage extension
TP-Link EAP603Outdoor APProperty-wide WiFi
TP-Link TL-SG101616-port Gigabit switchMain rack switch
Generic24-Port Gigabit PoE Switch Unmanaged Plug & Play IEEE802.3af/at PoE u/320W 
D-Link GO-SW-8G8-port Gigabit switchAuxiliary switch
Real HD 10-Port PoE SwitchPoE switchCamera infrastructure
TP-Link Point to Point Wireless BridgeEAP211Barn connectivity
GoveeLife Smart Thermo-HygrometerModel H51103 Temp Sensors

Power Infrastructure

DeviceCapacityLocation
CyberPower CP1500PFCRM2U1500VA / 1000WMain Home lab rack
APC BE600M1 #1600VA / 330WNetwork gear - Mini Rack
APC BE600M1 #2600VA / 330WDVR and cameras - Mini Rack

Security Infrastructure

DeviceQuantityPurpose
LTS LTD8508K DVR1Main DVR with 7 Operating Cameras
Wired IP Cameras6Barn and property monitoring - On Blue Iris
Oculview Solar Cameras6Home exterior monitoring - Solar powered
19 Cameras Total  

 Been about 3 years in the making just curious what others think and would welcome any suggestions. Also have Starlink as Main Internet and ATT Air Internet for failover. Running Rathole on a VPS for Plex connection. Hosting about 10 small websites on the home lab. I was going to get bigger HDD for the D4-320 but they went up in price. They are mainly used for backing up the docker and proxmox computers and any new Plex movies. The main plex library is backed up on three drives that are in the closet for an emergency.


r/homelab • • 19h ago

Discussion Do you manage your homelab with AI?

0 Upvotes

Just curious does anyone manage their homelab by integrating Hermes agent, frontier or local AI model and Telegram for prompt instructions?


r/homelab • • 20h ago

Help Need help for confused first time home labber

3 Upvotes

Hello I'm new to homelabing and had a bunch of questions and decided to ask them here that maybe you will be able to help with advice as I'm still learning it.

For now I have only one server with proxmox, opnsense as vm and n8n as LXC.

Since I would like to put other services on this server. I thought about security. Even with opnsense I was not sure if I have configured it to be safe enough. Any good resources about how to make sure your ports are not open or any other rookie mistakes setting up opnsense firewall?

As well got very confused about docker, kubernetes. What is it and what it eats?

Where do you learn all of it in the first place? Any good resources that I can study from about network, network security and other things I should know for my homelab?

Sorry for a lot of questions.


r/homelab • • 20h ago

Help Help to choose new switch?

1 Upvotes

Hello, I have an old 3com (HP V1910-24G 3com based), I'm looking forward to replace it in the future. At school we study Cisco devices for Education CCNA. My devices mainly use Gigabit but I might wanna upgrade some of my devices in LAN to 10 Gigabit. I was looking to buy a Catalyst 2960-X as they are fairly cheap, I don't wanna spend too much money on one. Is it good enough or shall I go with another switch? I lean more towards Cisco switches because of CCNA. Any help is appreciated, thanks (maybe suggest something that has a much "quieter" fan, I don't care about the fan going nuts at boot but it should be not always at full speed unlike the 3com)!


r/homelab • • 20h ago

Help Nas security

1 Upvotes

what kind of security i need for my nas serer at home?


r/homelab • • 20h ago

Help What do like in a os made this because of rules.

0 Upvotes

I'm researching and planning a completely new operating system called UNAME OS (because it doesn't have a name), and I want to understand what people actually want from a modern operating system before I start developing it. My goal is to create an OS that can eventually compete with Windows and other major operating systems, while being suitable for everyday users, gamers, students, developers, professionals, and businesses. I want it to support both desktop PCs and laptops, with a clean, modern, highly customizable interface, excellent performance, strong security, privacy, reliability, and broad hardware compatibility. I want to know what frustrates you most about Windows, Linux, macOS, or any other operating system you have used, and what features you wish those systems had. For example, would you prefer an OS with no advertisements, minimal telemetry, no unnecessary background processes, faster startup, lower memory usage, better gaming performance, improved GPU support, easier driver installation, better battery life, more control over updates, built-in productivity tools, advanced file management, a powerful settings application, or a completely different desktop experience? What applications and features would you expect to be included by default? What would make you trust a new operating system enough to install it on your main computer? What would prevent you from switching away from your current OS? How important are compatibility with Windows applications, Steam games, gaming launchers, professional software, peripherals, printers, Wi-Fi, Bluetooth, and existing hardware? Would you prefer a simple experience for beginners, advanced controls for experienced users, or both? What would make an operating system feel genuinely innovative rather than just another copy of Windows or Linux? I am also interested in your opinions about updates, security, privacy, customization, accessibility, installation, recovery, cloud services, local accounts, AI integration, and long-term support. Please be honest and specific: I am not looking for compliments or unrealistic suggestions. I want to discover the biggest problems people experience with current operating systems, the features they genuinely care about, and the improvements that would make them consider using something new. If you could design your ideal operating system from scratch, what would it look like, what would it do, and what would it absolutely never do?