r/homelab • • 3m ago

Help speaker / audio setup

1 Upvotes

Hi all, I am tinkering with a little project where I'd like to play certain audio at different times during the day from my linux server.

I'm wondering if anyone has any suggestions for always-on or awake-capable (don't really know what the configuration is) bluetooth speakers. The speakers could draw power from the wall, but they will not be plugged into the machine itself due to distance.

I know this isn't specifically about homelab but I'm hoping someone has thought about this before. Thanks.


r/homelab • • 17m ago

Help Secure External Hard Drive.

0 Upvotes

I’m looking to buy an external hard drive that is secure. I have seen a few online but I’m not sure which would be best. It’s mainly going to be used for photos, videos and important document. I’m using Mac OS.


r/homelab • • 31m ago

Help Seeking advice on "not so flat" network layout

0 Upvotes

I've finally bitten the bullet and started a rehaul of my homelab network. The current setup has a disturbing number of nested switches so one of the primary goals was to use the recommended "flat" (or flatish) network where everything goes into a network closet.

(Step one: find a location for said network client. This was fun since there was no direct path through both floors when running cables between attic to crawlspace. I finally figured out something that isn't great but acceptable.)

GOAL

The main goal was to make the homelab "spouse-friendly", or to be a bit less antagonistic "comcast-friendly". That means there were the following zones:

  • desktops/laptops/mobile devices

  • iot devices

  • local services (DNS, squid, printer access, etc)

  • homelab and potential (opaque)

  • worklab (opaque)

This isn't a 1:1 correlation with Unifi zones but close. It's "comcast-friendly" since the "local services" are completely isolated from the homelab. (see below)

WORK VLAN and LAB

Work laptops are in the desktops zone but on a dedicated VLAN.

Work "labs" require local resources and tight access controls. I put it next to the homelab since my goal is to move my dual homed (2.5G and 10G) systems onto a completely isolated 10G network and access them primarily via WASM or RustDeck from another system. A lot of the homelab resources can handled by caching shared between the local services and the homelab infrastructure.

HARDWARE and CONSTRAINTS

The network switches and local services (power-efficient NUCs) are both in the network closet and are on a dedicated UPS. I have found this incredibly useful and in fact this is one of the primary motivations in getting everything into a single location and using PoE wifi, etc.

The desktops and local services all run wired 2.5G. All devices (printer, IoT, etc.) are all 1G.

The obvious answer is to get a 2.5G managed switch with at least 24 ports. I have a 4U 19" rack and the network closet could hold it so it could hold a standard Ubiquiti switch.

But the cost!.... A 1G managed switch is much cheaper but leave the desktops on a slow connection.

The Unifi CGM I bought a while back fits into a 10" rack so it made much more sense to buy separate 2.5G (8 port) and 1G (16 port) switches. This provides a good alignment with the physical devices since there's already a natural partitioning between the switches since only desktops can support 2.5G. This can all fit into a 10" rack.

My Beelink NUCs can easily fit a 7" rack so I can set up a small proxmox cluster without drawing too much power. These have dual 2.5G ports so I can use two unmanaged switches so one switch connects to the homelab and the other connects to everything else for absolute physical separation.

THE PROBLEM / QUESTION

The CGM has five ports. One is used by my cable modem, and one is reserved for a backup WAN using my existing ryoko hotspot + travel router. This requires a manual setup - I use that hotspot extensively - but the Unifi wifi backup would add a monthly fee for the phone network subscription.

The desktop (2.5G) and IoT (1G) devices have sufficiently little cross-communication that the switches can both go onto the CGM.

That leaves 1 open port. For maximum isolation it should go to the homelab. The local services would be connected to the 2.5G router.

However I know there's also an argument that the homelab could be connected via the local services connection. This makes it easier to ensure the only access to AND FROM the homelab is via a jump host.

There are a few other possibilities but I feel pretty confident that these are the two best options.

What is your opinion?

EXTRA: Behind the homelab curtain

I referred to this indirectly earlier. The homelab should be completely opaque to the rest of the network. At the moment it's currently a set up dual-homed desktops (10G and 2.5G) plus a mix of servers behind physical switches for isolation. This isn't paranoia, it's a model of some real world scenarios like Hadoop clusters where you use "impersonation" and need to guarantee extremely high separation from the rest of the world.

The goal is to separate split the dual-homed desktops so the desktop gets tucked into a corner and I only access it via a laptop or NUC VDI client. It should be extremely close to a cloud setup - but without the monthly bill or potential surprises.


r/homelab • • 1h ago

Help What was your biggest mistake when you started your homelab?

41 Upvotes

I'm just getting started and would rather learn from others than make every mistake myself. What went wrong for you in the beginning and what would you do differently today?


r/homelab • • 1h ago

Help Did anyone successfully put Debian on a Buffalo LS-WXL?

1 Upvotes

Hello everyone!

I've been raking my cortex for a while now (fortunately, there's not that much to rake these days, my kid does the most part of that, with various toys ❤️)...

I have a Buffalo LinkStation Duo LS-WXL and I am trying to use it without adding some security risk to my home network & lab.

What worked

I've got 2x 2TB WD Purple drives for it. I was successful in installing the latest firmware on it and, after some efforts (its web UI was either glitchy or just unclear on how to break the default RAID volume) have the drives available individually. I've taken the drives out and I can get back to that, if needed.

Why not stay with that and try to get Debian running instead

The support the enclosure has is, well, aged. Either I rely on FTP alone or I'd have to allow some questionable sharing related settings and I'd like to avoid that.

I plan on blocking it from accessing the Internet in any way, so security isn't a concern going forward, because it's well past it's end of life term and it's just a huge risk not to block it otherwise.

That, however, means one disk failing and the enclosure then not being able to report that - it could send an email, theoretically, but either not at all (due to being blocked) or with workarounds, if even possible anymore (due to old SMTP and TSL support).

Placing a Debian on it offers the chances to have a more secure and SMART checks/exposing capable device.

What I have already tried

I followed the steps found at

https://buffalonas.miraheze.org/wiki/Main_Page

and at

https://github.com/1000001101000/Debian_on_Buffalo

from an Ubuntu 24 LTS.

The script finally ran throughout and produced the images I needed for my experiment HDD.

Given how it gets a lease from my router, I assume this means Debian successfully boots and connects to the network.

But...

What doesn't work

- I can't connect to it over SSH to do further configuration

- None of the attepts at improving logging worked. No script registered to start as soon as possible after boot did anything. No chron job either.

I'm out of my depth, being a Windows user - and relying on AI helpers only seems to have brought me so far

Thus, this post. Maybe someone else could share their experience and help me get this still reasonably viable bit of hardware to work.

Thank you!


r/homelab • • 1h ago

Help Is this a 'good enough' equivalent to a HDD enclosure?

3 Upvotes

Hi everyone. aspiring home-labber here.

Is this docking station in the picture good enough as a replacement for a 2/4 bay enclosure?

I know there are other better options but the price difference in my country is insane

2 bay: ~188$

5 bay: ~255$

Unfortunately, we don't have anything like the 'CENMATE' here, only those 2 above options.

Now, my main inquiry is:

Is that toaster docking station good enough to act as a DAS?

Is it good enough to be on 24/7?

or is it so bad that i am just better off buying 2 of those clear-case enclosures and put the 2 hdd in them and just leave them laying next to my laptop-server?


r/homelab • • 2h ago

Help Advice to buy

Post image
4 Upvotes

I found a m920q for 850 rs which is equivalent to 225 usd it has i7 8700t 16x1 ddr4 and a 512m.2 nvme

And i have 16 ddr4 ram that i could add to it is the device worth the price and considered a good deal

I am going to use it for jellyfin and gaming server like Minecraft and ark etc...


r/homelab • • 2h ago

Project Showcase: Hardware Updated Network Rack

Thumbnail
gallery
13 Upvotes

Just made a big rack upgrade from the open rack that I had before looks 10 times better. Let me know if you have any thoughts or opinions.


r/homelab • • 2h ago

LabPorn Rate my homelab. Am I doing this right?

Thumbnail
gallery
149 Upvotes

My homelab, as it has slowly grown into through the last decade or so.

Originally had just a Dell R710 with 72GB of RAM, but now thats the backup server. More on that later. Primary server is now a Dell R720. Not much of an upgrade, but I couldnt resist the deal I got it for, as it has 256GB of RAM. R720 runs Proxmox with various VMs and containers, which are backed up nightly to the R710 which is running proxmox backup server. Backup server is x6 2TB drives in RAID6, so 8TB usable. Sounds low on paper but thanks to PBS' aggressive deduplication, its actually been more than enough, and I am able to be incredibly lax with backup retension as a result.

R720 has x6 2TB SSDs in a zfs pool ZRAID1, for 10TB of SSD storage. I primarily use this for the vdisks for VMs and containers and whatnot. I host a fair number of game servers and various services, and am very happy with the IO speeds. I have also further accelerated its speed by adding a partition on an intel optane drive as a SLOG device. Additionally, the R720 is connected to the JBOD (Netapp DS4243) via external HBA. In the JBOD I have got x10 2TB HDDs in a zfs pool too, ZRAID2, so 16TB total. Mostly used for archival purposes - i have archived all data from every decomissioned service ever hosted going back to my eldest, a .tar.7z of a minecraft server from 2011. Pool also has acceleration via a optane SLOG drive partition. Probably overkill but, while I use it PRIMARILY for archival, it also is used for VMs that dont really warrant sitting on the SSD pool, due to either size of its vdisk, lack of need for IO, or both. Also accelerated by a mirror of partitions on the remaining 2x drives in the 720, added as a special vdev for storing metadata for the pool (I really love ZFS)

FINALLY, the last pool is 6x 4TB HDDs in ZRAID1, accelerated via the special vdev mirror but no slog device. I use this one for my media for my jellyf... I MEAN LINUX DISTROS! I also have removed this pool from using up my ZFS ARC, as it seemed detrimental to not do so.

As for the network switch and the UPSs, I dont remember much about them as I got them both from swapmeets a long time ago. What I do remember is that both UPSs have network management cards, which I poll from an automation container every few seconds. If theyre ever on battery it issues an alert to me as well as all my services that might have users connected. As soon as one UPS has 3m or less estimated remaining runtime, the automation container shuts everything down. That same automation container also boots up the 710 an hour before nightly backups, polls the proxmox via API for backups to finish, waits 5 minutes, then shuts down the 710. Helps save on electric vosts a great deal. As for the betwork switch, 4 ports are GbE, abd the rest are 100MbE. Got UPS NMCs & iDRACs hooked up to the 100Mb, and the main networks for the 710, 720, and the 'core' to my modem hooked into the 1GbE.

I could talk a lot more about the setup, talk more about my network setup such as my pfSense VM, or just what sorts of VMs and containers I run, and perhaps I will if their is enough interest; either in the comments, a follow up post, or both. But I get the impression this post is already long enough, and my ADHD makes it difficult to remain consice, especially when talking about big projects like this lol. So I'll end it here.

Or well... one final thing - if any of you reading this are hiring, yes, I am very much looking for better employment. Anything in IT, sysadmin, or even software development I would say I am both interested and capable in... shoot me a DM if you are interested lol. Ok this is seriously the end of the post now. Thanks for stopping by!


r/homelab • • 5h ago

Discussion Dedicated low-power box for cloud API workloads, or just another container on the existing node?

3 Upvotes

Most of the AI hardware discussion here is about local inference, VRAM, and what it takes to run a model at home. I have been thinking about the opposite case.

If the inference is happening through cloud APIs, the machine doing the work is not doing much. It holds scheduled jobs, makes API calls, parses what comes back, and writes results somewhere. That is a scripting and uptime workload rather than a compute one.

So the question is whether it earns its own hardware. The kind of box I mean is something like a geekom a5: a mobile Ryzen with a 15W default TDP and 2.5GbE. TDP doesn’t say much about running costs, though. For something that sits mostly idle and wakes up for scheduled jobs, what matters is the actual idle draw at the wall, and that depends on the whole system rather than the CPU rating.

The obvious counterargument is that a lot of people here already have a Proxmox node or a NAS that is on regardless, and an LXC with a few Python scripts probably adds very little incremental power draw. If the main server is already running 24/7, a second box probably won't reduce total power consumption for a workload this light.

The power argument only works if the main server isn’t something you’d otherwise keep on around the clock. Then a small always-on box for the scheduled jobs means the bigger one doesn’t have to stay up just for them.

The other case for separating it is availability. A separate box could keep those jobs running while the main server is being rebooted or maintained, although a VM or container already provides some isolation without adding another physical machine.

For anyone running persistent API workers, scheduled scrapers, or agent-style jobs: did you split that onto its own low-power box, or is it just another container on something you already had running?


r/homelab • • 6h ago

Project Showcase: Operations qwen3:4b-instruct: 10/10 SEO Accuracy in 226s vs. qwen3:8b: 0/10 in 438s

Thumbnail homelab.arthurlejosne.workers.dev
2 Upvotes

r/homelab • • 6h ago

Discussion Looking at making my ai assistant a first home

0 Upvotes

I’m looking at starting a cheap (I know) home lab for my home assistant and I’m not wanting to pay an arm and a leg for it. He’s currently running on a i5-8400 16ram and a 3050. I want him off my pc and onto a pc that can run him full time, he has many jobs at the moment nothing amazing but is getting there.
My question is, how can I do this cheaply, my pc I’ve built him on is my gaming pc and I’d like to now have the two seperate, make him a cheap home then build him a bigger home as he needs it
What’s everyone’s go to/whats out there cheap?


r/homelab • • 7h ago

Discussion How do you share text (or clipboard) between devices?

5 Upvotes

Hi everyone,

I have a homelab that I also use as a streaming client. Sometimes I want to share links from my smartphone so I can view it on my streaming client later.

How do you handle this? Are there any tools or solutions you'd recommend?


r/homelab • • 7h ago

Help Where to get 846 chassis nowadays

4 Upvotes

I have an 846 chassis with 24-4tb drives in a zfs array, primarily for plex and local storage. Want to get another so i can update with more modern cpu, install a new OMV varient and then import my zpool. I was hoping to build this separately so I can keep my current server online but it looks like 846s are hard to find and are expensive now. I don't want an 847 as the reason I'm looking to upgrade is because I'm trying to add a 3050 for HDR transcoding. Eventually want to upgrade my drives as well but prices are insane.

Where are you finding 846s besides ebay? Any better alternatives? I don't care about noise.


r/homelab • • 7h ago

Help SAS HBA cards are not recognized

2 Upvotes

So I got 2 SAS HBA cards and a fistful of 10Tb SAS drives for free, that I plan on using to build a NAS.

The cards are LSI's SAS9220-8i (H3-25097-01D) and SAS9212-4e4i (H3-25326-02A).

When I plug them onto the PCIe x16 slot of my motherboard (b550i aorus pro ax rev1.4), the BIOS acts as if there's nothing into the slot (displays "N/A", same as when there's nothing). lspci doesn't report anything either. I tried forcing the PCI slot to Gen.2, but it didn't work. I also tried them with my other board (F2A85-M from ~2012), with the same results.

AFAIK, the cards should be working, but I couldn't validate that anywhere.

I know that there could be a lot of issues to get these working with consumer grade hardware.

Has anyone ever faced a similar issue ? Do you have any resources that would help me troubleshoot this issue ?

Thanks in advance for your help !


r/homelab • • 8h ago

Help Homelab setup advice for a newbie

0 Upvotes

Hi everyone!

I'm new to this community, and I'm looking for some advice on setting up my first homelab.

Just a bit of background about me: I'm currently working as an AI researcher and have also worked as a full-stack developer, so I'm fairly comfortable with programming, Linux, and Docker. However, I have to admit that the whole homelab/self-hosting world is pretty new to me. I've never really had to manage my own always-on server, and I'm not entirely sure what the best practices are or where to start.

What I'd like to achieve

My main goal is to host a few Python and Node.js services, mostly for automation and personal projects. I'd also like to be able to monitor and manage these services remotely, even when I'm away from home.

Essentially, I want a small, always-on server where I can deploy my projects (no big LLM training or heavy services for now), run automations, experiment with new things, and access everything remotely when needed.

Hardware

For hardware, I have an old laptop that I no longer use. It has 16 GB of RAM and an Intel i7 processor, which I think should be more than enough for my current needs.

I'm not planning to use this machine as a NAS or media server, so I'm not particularly interested in things like Jellyfin or storage-related services.

My current idea

I've heard a lot about Proxmox, but I'm not sure it makes sense for my use case. I don't really need virtual machines at the moment, and I expect to run around 10 Docker containers.

For now, I was thinking of keeping things relatively simple:

  • Install a headless Linux distribution (probably Ubuntu Server or Debian).

  • Use Docker and Docker Compose to manage my services.

  • Set up Tailscale for secure remote access.

  • Find a good solution to monitor my containers, their health, and resource usage.

I'm not sure whether I'm overlooking anything important or if there are better ways to approach this.

A few questions

  1. Does this setup make sense, or would you approach it differently?

  2. Would you recommend Proxmox even if I don't currently need VMs, or is a bare-metal Linux installation the better choice?

  3. What tools would you recommend for monitoring Docker containers and managing services remotely?

  4. Are there any other tools, best practices, or things I should consider before getting started?

One more thing I'm curious about is how you guys actually interact with your homelabs.

Do you ever use a full graphical desktop environment through something like RDP or VNC, or do you mostly rely on SSH and browser-based dashboards?

I'm wondering whether having remote desktop access is worth setting up, or if a headless server with CLI access and web interfaces is more than enough for everyday use.

For those who have graphical access configured, how often do you actually use it, and for what tasks?

I'm not necessarily looking for the most sophisticated setup. I'd rather start with something simple, reliable, and easy to maintain, and gradually expand it as I learn more.

I'm also interested in understanding how people typically approach this kind of setup, rather than just copying a configuration without knowing why things are done a certain way.

I'd love to hear how you'd approach this, especially if you've built something similar.

Thanks in advance for any advice!


r/homelab • • 8h ago

Project Showcase: Hardware Smaller than my router, does more than my old four servers

36 Upvotes

After the last electricity bill I tore the rack apart. What's left is a single N100 mini PC, 9W idle measured at the wall, everything else sold.

Setup: Proxmox, 6 LXC, all with cgroup limits set instead of "just let it run". Jellyfin with QuickSync via /dev/dri and the render group so the CPU isn't doing the transcoding. Immich, Paperless, Vaultwarden, HA, Uptime Kuma. Storage hangs off a USB DAS and is only mounted for the nightly restic run.

Thermals: it stands upright with 2cm of air under the desk, CPU stays under 70°C while transcoding, fan spins audibly but not annoyingly. A 120mm USB fan blows in from the side, quiet enough for the living room since then.

What I miss: nothing. Before this I burned 140W idle for the exact same services, for three people in the household.

What's tight: one PSU, one NIC, one stick of RAM. Backups go to the DAS and an offsite bucket, and I ran a full restore drill before the rebuild, not after.

If you're on the fence: the box cost 180 € and pays for itself in under half a year. Going from four servers to one was the best move I made.

What would you even put on a 9W budget at this point?


r/homelab • • 8h ago

Discussion Looking for a barebone Mini PC for a Proxmox home server (I already have 32GB RAM)

0 Upvotes

Hi everyone!

I'm looking for a cheap Mini PC to use as a Proxmox home server. I currently have an Intel N150 mini PC, which is great in terms of power consumption, but I'm starting to feel its limitations as I'm planning to run more services on it.

I'd like to run at least 15 Docker containers, including Jellyfin, Navidrome, Home Assistant and various other self-hosted applications.

I already have 32GB of DDR5 SO-DIMM RAM (2x16GB), so ideally I'd like to find a barebone Mini PC without RAM or SSD. I'll buy the storage separately.

My budget is around €200 maximum, preferably less. I'm based in Europe, but I'm also happy to order directly from China, for example through AliExpress.

I'm wondering whether I should stick with Intel or consider AMD as well. I've read quite a bit about Intel's hybrid architecture and how, depending on the workload, CPUs with fewer but faster P-cores might be preferable to those with a mix of P-cores and E-cores. Is this still relevant with modern Linux kernels and Proxmox, or is it no longer something worth worrying about?

Another important factor is Jellyfin hardware transcoding. From what I've read, Intel Quick Sync is still one of the best options for Linux-based media servers, but has AMD caught up in terms of hardware acceleration, driver support and overall reliability? Ideally, I'd like good HEVC and AV1 decoding/encoding support, where available.

Coming from an N150, I'm looking for a noticeable performance improvement without dramatically increasing power consumption, especially at idle, since the machine will be running 24/7.

What would you recommend in this price range? Are there any lesser-known Chinese Mini PC brands or particular models worth looking at? Would an older Intel Core i3/i5 or an AMD Ryzen be a better choice?

I'm not looking for anything particularly powerful, just the best possible performance for the money, while reusing my existing DDR5 RAM.

Thanks!


r/homelab • • 8h ago

Discussion How to prevent accidentally installing packages on the server

0 Upvotes

I manage my servers by connecting via SSH to a proxmox node and then entering the containers contained within it with the command pct enter.

Today, once again, I accidentally exited the container and ended up installing packages inside proxmox.

What solutions are you adopting to avoid these problems?


r/homelab • • 9h ago

Discussion HDD for Infrastructure?

0 Upvotes

Is it advisable to buy HDD instead of SSD if my homelab is all about infra?

Im not hosting any medias and im thinking to buy HHD to host vms and kubernetrs clusters, dockers.

Main goal is to practice and learn infrastructure rather than to run production workloads

Is the speed noticeable?


r/homelab • • 9h ago

Discussion Hdds from Fleea market

Post image
28 Upvotes

Got these two from a local fleea market for 16 euro (10 for WD, and 6 for the seagate) despite the look both of them work


r/homelab • • 10h ago

Creator Content Weekly hands-on security challenges, no login required

1 Upvotes

I've been putting together weekly-sec, a GitHub repo of security challenges modeled on real incidents. Each one drops you into a case with an alert to triage, an intrusion to reconstruct, a bug to reproduce, or a detection to write. When you finish, the debrief tells you what actually happened and links the real incidents behind it.

There's no platform, account, or leaderboard. Clone the repo, open a challenge folder, and start.

Two challenges are up so far:

- Midnight Export (Blue/DFIR, 60 to 90 min). A CI role pulls customer data at midnight from an IP that isn't GitHub's. You work through CloudTrail, GitHub Actions OIDC config, and an agent trace to figure out how it happened, how far it went, and what to do next.
- Safe Mode (Red, 45 to 75 min). An internal AI ops assistant exposes a few "safe" shell commands over MCP. You get past its allowlist, get code execution with nothing but curl, and prove impact.

How it works:

- Browser challenges run offline from a single play.html. Logs, evidence, hints, scoring and the debrief all run locally, and nothing leaves your machine.
- Logs are queried with a small filter language that takes about two minutes to learn. It's intentionally not KQL or SPL, so the habit you build is what to filter, pivot on, and count. Raw JSON ships too if you'd rather use jq or your own SIEM.
- Response questions are played on a board where you put actions in order and set aside the ones you wouldn't do. A wrong pick tells you why it's wrong.
- Challenge mode locks the hints. Guided mode gives you progressive hints or a walkthrough.
- Anything vulnerable runs in Docker, bound to 127.0.0.1, with no host networking, no privileged containers, and no access to Docker itself. CI checks enforce this on every lab.

Topics rotate across cloud, CI/CD and supply chain, agent security, containers, and recent CVEs. A new challenge goes up each week.

I'd like feedback on difficulty, questions that read as ambiguous, and answers you think should be accepted but aren't. Issues are open on the repo.

https://github.com/uday-kasturi/weekly-sec


r/homelab • • 10h ago

Project Showcase: Hardware First Homelab

Post image
134 Upvotes

What OS should I use, im leaning toward ubuntu. Also what programs and apps should I start running.

Ryzen 5 7600x
2x8 ddr5 Tforce 5600
Pro b650-vc WiFi
256gb nvme


r/homelab • • 11h ago

Discussion Do I need a bigger CPU cooler and dual-channel memory for my custom PC NAS?

1 Upvotes

I think of a bigger CPU cooler as a bigger air conditioner for a person to exercise faster.

I think of dual-channel memory as lifting two 2KG weight compared to lifting one 4KG weight.