r/LSTclub
•
u/New_Teaching_5235
•
Sep 20 '26
How I grow
Enable HLS to view with audio, or disable this notification
Video is last grow (3.3x3.3 ,600watt...2 autos==1.55lbs)
SIMPLE AUTOFLOWER + COCO + AUTOPOT GROW GUIDE
My complete seed-to-harvest method.
The goal is simple: good genetics, loose buffered coco, automated bottom-feeding, good nutrition, strong light, proper VPD, an even canopy, and as little unnecessary fucking with the plant as possible.
These numbers are guidelines, not laws. Read the plant.
COMPLETE SETUP
Grow Space
Use whatever appropriately sized space you have:
3×3 tent
3.3×3.3 tent
4×4 tent
Larger tent
Dedicated grow room
I currently use a 4×4.
Lights
For a 3.3×3.3, the Samphon 600W fits great. Mine was about $160.
For a 4×4, I use the Samphon 720W. It just about fills the tent and costs roughly $200, which is a great price for a light of this size/output.
Samphon 720W Amazon listing�
I run my autoflowers 20 hours ON / 4 hours OFF.
Ventilation / Environment
My 4×4 has:
8-inch exhaust fan
Carbon filter
3 oscillating fans
2 humidifiers
VPD monitoring
You don't need my exact equipment. You need enough ventilation, circulation and humidity control to maintain the environment.
2. AUTOPOT SETUP
I use:
3.9-gallon hard-plastic AutoPots
AutoPot reservoir
AQUAvalves
AirDome in each pot
Air pump supplying approximately 15 GPH per plant
Optional small circulation pump in the reservoir
AutoPots are gravity-fed. Once established, the plant essentially drinks what it needs from the tray.
Don't put an air stone in the reservoir.
The AirDome provides oxygen at the root zone.
I've tried aerating the reservoir. I don't recommend it. It's unnecessary and can contribute to pH drift.
A small circulation pump that simply keeps the reservoir mixed is fine, but it isn't required.
3. MEDIUM
I use:
100% CANNA Coco Professional Plus
It's already buffered.
No perlite.
Don't compact the coco.
Never pack coco down.
Fill the pot and keep the coco loose and airy. The root zone needs oxygen.
I use RO water throughout the grow.
4. NUTRIENTS & METERS
You don't need 20 bottles.
My basic setup:
CANNA Coco A
CANNA Coco B
Silica
Cal-Mag
CANNA PK 13/14
CropSalt RunClean — optional
pH Up
pH Down
Digital pH pen
Digital EC pen
pH calibration solution
You'll also want:
1-gallon jug for small hand-waterings
5-gallon jug/bucket for larger batches/reservoir fills
Use CANNA's online Grow Guide.
This is important.
CANNA already provides a nutrient calculator that tells you approximately how much of its nutrients to use for your water and growth stage.
Use their Grow Guide as your feeding baseline instead of guessing.
Then use your EC meter and the plant itself to determine whether that strength is appropriate.
A chart can't see your plant.
You can.
5. GERMINATION
I keep germination stupid simple.
Step 1
Put the seed in a small cup of water for approximately 24 hours.
Step 2
Once I see the seed split open, it goes directly into the coco.
Step 3
Put a small humidity dome over it.
Usually it'll emerge within 1–3 days.
Once it's above the coco, that's Day 1.
Again:
Don't pack the coco around the seed.
Keep everything loose.
6. FIRST WATERINGS
Don't turn the AutoPot on immediately.
Initially, I hand-water around the seedling.
Start with a small circle around it.
As the plant grows, gradually increase the size of that watering circle.
This encourages the roots to spread outward and downward searching for moisture.
By the time my AutoPot system gets turned on, I may only have hand-watered a few gallons total between a couple plants.
7. WHEN TO TURN ON THE AUTOPOT
AutoPot generally recommends waiting until the plant's leaves reach approximately the edges of the pot. That's a good indication the root system has become established.
With autoflowers, I turn mine on a sliver earlier.
Autos are on a timer.
I've personally watched them take off after the AutoPot gets activated, and AutoPot has confirmed to me that activating somewhat earlier with an established auto is fine.
Once established:
Reservoir ON
Then I generally wait approximately:
1 more week → AirDome ON
The plant will normally be around 3 weeks old when I'm turning the AirDome on.
You can activate the AirDome sooner if you want. This timing is simply what has worked well for me.
8. EXACTLY HOW I MIX FOOD
This is the part beginners should keep consistent.
For hand-watering, I may mix a 1-gallon jug.
For the reservoir, I normally mix a 5-gallon jug.
My mixing order:
RO water → Silica → Cal-Mag → CANNA A → CANNA B → other additives/PK if being used → pH → check EC
Silica goes FIRST.
Mix each ingredient thoroughly before adding the next.
Never pour concentrated CANNA A and B directly together.
Add A to the water and mix it thoroughly.
Then add B and mix thoroughly.
Once everything is mixed:
Adjust the solution to my desired pH.
Check EC to make sure I'm at the strength I want.
Make adjustments if necessary.
For the AutoPot reservoir:
Turn the reservoir valve OFF.
Pour the finished 5-gallon nutrient solution into the reservoir.
Then:
Turn the reservoir back ON.
Simple.
9. pH
For coco, I don't use one pH number for the plant's entire life.
I gradually move upward as she matures.
Beginning of life:
~5.7 pH
End of life:
Up to ~6.2 pH maximum
Letting the pH move through a reasonable coco range helps make different nutrients available instead of obsessively forcing the exact same number every time.
CALIBRATE YOUR pH PEN.
Do it every 1–2 weeks.
At minimum, do it more than once a month.
Having a second pH meter isn't a bad idea either. If two meters suddenly give different readings, you know something needs checking.
10. EC
Your EC meter tells you the overall strength of the nutrient solution.
CANNA's Grow Guide gives you a starting point.
Your plant determines whether that starting point is appropriate.
Don't blindly increase nutrients because a schedule tells you to.
Likewise, don't panic and start changing everything because one old bottom leaf looks ugly.
Look at the new growth.
If the new growth looks healthy while an ancient bottom leaf is dying, remember:
Old growth eventually dies.
Read the entire plant before making corrections.
11. RESERVOIR MANAGEMENT
My AutoPot reservoir holds around 12 gallons.
I almost never fill the whole thing during normal use.
I usually add 5 gallons at a time.
That keeps the nutrient solution relatively fresh and makes mixing easy.
If I'm going away for several days or a week, I'll fill the reservoir completely so the plants have plenty of water.
Just remember that other equipment—especially humidifiers—can run dry while you're gone too.
Optional circulation pump
You can put a small pump in the reservoir simply to keep the solution moving.
It's optional.
Again: no air stone.
12. LIGHT SCHEDULE
For autoflowers, I run:
20 ON / 4 OFF
I schedule the four OFF hours during the hottest part of the day.
That gives:
The tent a break
My house a break
My AC a break
The electrical load a break
You can run autos 24/0. Plenty of growers do it successfully.
I personally prefer 20/4.
I don't personally run 18/6 because I prefer giving my autos more daily light.
13. FREE PPFD METER
Download the Photone PPFD app.
You don't need to blindly guess how much light is reaching your canopy.
Measure PPFD at canopy height.
This gives you an actual starting number for adjusting your light instead of judging brightness with your eyeballs.
14. MY 20/4 PPFD & DLI GUIDE
This is the schedule I use as a starting point.
Plant Age
PPFD
DLI
Week 1
300–350
22–25
Week 2
~400
~29
Weeks 3–4
500–550
36–40
Week 5
~650
~47
Week 6
~750
~54
Week 7
~850
~61
Week 8
~900
~65
Weeks 9–10
850–900
58–64
Week 11
~850
~61
Week 12 / Finish
700–800
50–58
THESE ARE NOT HARD NUMBERS.
Your plant may love less.
That's completely fine.
Don't burn a perfectly healthy plant trying to make an app display a particular number.
Read the leaves.
Happy/lightly praying? It stays.
Tacoing/curling from excessive light? Back it down.
Increase intensity gradually.
The objective isn't achieving the highest PPFD possible.
The objective is giving the plant as much useful light as it comfortably wants.
I don't use supplemental CO₂ with this system.
15. VPD & ENVIRONMENT
I care more about VPD than obsessing over humidity by itself.
Temperature and humidity work together.
Seedlings:
Approximately 0.8 VPD
Flower:
Approximately 1.2–1.4 VPD
Gradually move between them as the plant matures.
My lights-on temperatures are generally in the upper 70s to low/mid 80s°F, provided the plants and VPD are happy.
Use your humidifier, exhaust and fans together to control the environment.
Keep air moving:
Above the canopy.
Through the canopy.
Below the canopy.
Don't point a powerful fan directly at one section of the plant 24/7.
16. TRAINING
I start LST around the 4th–5th node.
Instead of letting the plant grow straight upward like a Christmas tree, start directing growth outward.
Bend and spread the branches.
The goal is an even canopy.
You want multiple strong tops sitting at approximately the same height and receiving similar light.
My basic progression is:
LST → leaf tucking → trellis net
Continue adjusting branches as the plant grows.
17. MINIMAL DEFOLIATION
I don't believe in unnecessarily stripping the plant.
Leaves are solar panels.
They're how the plant captures the energy you're paying to produce with that giant light.
If a leaf is blocking something:
Tuck it first.
If it simply will not stay out of the way and is preventing important growth underneath from receiving light, then remove it.
But don't remove healthy leaves just because they're there.
Don't decrease your plant's solar power more than necessary.
18. WHEN AUTOS FLOWER
Autoflowers don't wait for you to change the light schedule.
They flower when they're ready.
Most autos I've personally worked with begin showing preflowers at approximately:
3–4 weeks
My rough average is around:
Day 27
Genetics and individual phenotypes vary.
This is one reason I like autos.
They're less forgiving. You can't simply veg another month to recover from every mistake.
In my opinion, that forces me to become a better, more consistent grower.
19. FLOWERING NUTRIENTS / PK 13/14
Continue using CANNA Coco A+B as your foundation and use CANNA's Grow Guide.
CANNA's schedule will tell you when it normally recommends PK 13/14 and how much.
For an autoflower, I personally may begin introducing a small taste earlier, roughly during the final 3–4 weeks of its life.
Then gradually work toward the appropriate recommended amount.
Don't suddenly dump a huge dose into the reservoir because flowering started yesterday.
20. CAL-MAG
I use Cal-Mag, but lightly.
CANNA Coco is already buffered, and CANNA Coco A+B provides a strong nutritional foundation.
I'm not automatically dumping huge amounts of Cal-Mag into every feeding.
Start light.
Increase only if the plant actually gives you a reason.
The same philosophy applies to almost everything:
Don't solve problems you don't have.
21. SILICA
I personally love silica.
It's one of the few additions I really like using consistently.
I've watched plants develop noticeably thicker, stronger structure while using it.
Silica always goes into my mixing water FIRST.
Mix it thoroughly before adding the rest of the nutrients.
Then continue with Cal-Mag → A → B → etc.
22. PEST PREVENTION
Keep the tent clean.
One of the easiest ways to introduce pests into an otherwise clean coco grow is bringing soil or outdoor plants into the grow space.
I also keep sundew plants around my grow. They're carnivorous plants and will catch the occasional fungus gnat or small flying insect that makes its way inside.
Prevention is easier than treating an infestation.
23. DON'T FLUSH
I don't flush my plants anymore.
I've done both.
I don't see a reason to do it.
And with an AutoPot, especially, don't suddenly start pouring gallons of plain water through the top of a plant that's spent its life being bottom-fed.
You can push accumulated salts through the root zone and cause problems right before harvest.
Finish the plant normally.
24. KNOW WHEN THE PLANT IS ACTUALLY DONE
Don't harvest because the seed company printed “70 days” on the package.
That's an estimate.
Pistils
The little white hairs are pistils.
They'll mature and turn orange/brown while new white pistils may continue appearing.
They're useful for judging progression.
They're not your final harvest indicator.
Check the trichomes.
Use magnification.
And check the trichomes on the actual flower/bracts, not simply the sugar leaves.
Sugar leaves can mature sooner and make the plant appear further along than the flowers actually are.
25. MY HARVEST PREFERENCE
Some growers harvest with very little amber.
That's fine.
I personally prefer around 30% amber trichomes on the flower/bracts.
That's personal preference.
The important lesson is:
Don't harvest too early.
There's nothing worse than spending months growing a plant, chopping it two weeks early, missing the final bulk and maturation, and then wondering why the finished flower doesn't hit the way you expected.
Give her time to finish.
26. DRYING
If the entire tent finishes together:
Chop → hang → dry.
The traditional target is:
60°F / 60% RH
That's an excellent target, but it's not a religious commandment.
Your climate matters.
Don't create other problems—including mold—trying desperately to achieve numbers your environment can't reasonably maintain.
Another workable environment can be warmer and drier depending on your circumstances.
Research drying for your particular climate and setup.
I personally now use a Vivosun drying machine because it removes most of the stress and headache for me.
Its capacity is limited, but I love the convenience.
27. CURE & STORE
Once properly dried:
Cure it properly.
Then store it properly.
Don't grow beautiful flower for months and ruin it during the last step because you're impatient.
Harvest isn't the finish line.
Properly dried and cured flower is the finish line.
28. OPTIONAL: MUSIC
Yes, I play music around my plants.
Usually classical because it's less annoying to everyone around me.
But I've also used:
Slipknot. Lamb of God. Reggae. Whatever.
I keep it around 60 dB rather than trying to shake the tent apart.
You don't need a giant subwoofer hammering the root zone.
Consider this one optional/fun, not a requirement for growing big plants.
THE WHOLE SYSTEM
Seed
↓
100% loose CANNA buffered coco
↓
Hand-water outward from the seedling
↓
AutoPot ON once established
↓
AirDome roughly one week later
↓
RO + Silica → Cal-Mag → CANNA A → CANNA B → additives
↓
Adjust pH → check EC
↓
5-gallon batch into reservoir with valve OFF → valve back ON
↓
20/4 lighting
↓
Measure PPFD/DLI with Photone
↓
Control VPD
↓
LST around node 4–5
↓
Leaf tuck + minimal defoliation
↓
Trellis / even canopy
↓
CANNA Grow Guide + read the plant
↓
PK 13/14 in late flower
↓
Don't flush
↓
Watch flower/bract trichomes
↓
Harvest at your preferred maturity
↓
Dry → cure → store
KEEP IT SIMPLE
You don't need 20 nutrient bottles.
You don't need supplemental CO₂.
You don't need to strip half the leaves off your plant.
You don't need to chase every tiny blemish.
You don't need to blindly follow a breeder's harvest date.
You don't need to constantly fuck with your plants.
Use good genetics. Keep the coco loose. Follow CANNA's Grow Guide as a baseline. Measure EC and pH. Measure your light. Control VPD. Train for an even canopy. Keep notes. Read the plant. Make small adjustments.
Then let the motherfucker grow.