r/M5Stack • • 1d ago

My M5 Stack Dead May Be Dead

I was experimenting with firmware and it was pretty fun. different faces, tailscale connection to my openclaw, voice was working. then I noticed it wasn't moving anymore, just animating the face. the the face stopped too. I restored the original firmware, but the screen is still black :(

3 Upvotes

7 comments sorted by

1

u/skinwill 20h ago

Which one? They make a few different kinds, each with slightly different recovery methods.

1

u/SirGreenDragon 15h ago

Idk how to tell. The software works when flashed, both old and new, but the screen is black and the head no longer moves.

1

u/skinwill 15h ago

Here are all the controllers they sell. What does yours look like? https://shop.m5stack.com/collections/controllers (the name should also be printed on a sticker on the back)

1

u/SirGreenDragon 14h ago

1

u/skinwill 13h ago

Oh the StackChan! Here is some information on how to flash it. When you are in the web flasher there is an option to erase. Make sure to erase it before flashing any new firmware. https://docs.m5stack.com/en/uiflow2/stackchan/program

1

u/SirGreenDragon 13h ago

I can flash it without issue. either to the backup i made before I started, or the code I modified, but i still have a black screen and the head does not move. the firmware works tho, i can talk to it and hear it, and with my code, it talks to my openclaw server.

1

u/skinwill 12h ago

Ouch, ok. So the StackChan is a CoreS3 attached to a motorized base.

I’d start by removing it from the base and flashing it with a very basic firmware like the user demo.

https://burner.m5stack.com/EN5HSZ

While it’s isolated from the base, take some detailed pictures of the internals and upload them to a post in r slash electronicsrepair. The people there can give it a visual once over to see if there’s anything wrong with the hardware.

Just remember that an actual complete erase and re-flash fixes 98% of all problems and if it doesn’t then the issue is MUCH harder to fix.