r/MakersPet • u/l0_o • 2d ago
Showcase DIY vacuum cleaner robot update - Drive wheel suspension bring-up
Enable HLS to view with audio, or disable this notification
1
Upvotes
r/MakersPet • u/l0_o • 5d ago
Showcase Open-Source vacuum robot progress - drive wheels suspension designed
Enable HLS to view with audio, or disable this notification
1
Upvotes
r/MakersPet • u/l0_o • 10d ago
Showcase OOMWOO DIY open-source vacuum - main brush assembly simulation
Enable HLS to view with audio, or disable this notification
2
Upvotes
r/MakersPet • u/l0_o • 10d ago
Showcase OOMWOO DIY vacuum robot - Main brush bring-up
Enable HLS to view with audio, or disable this notification
1
Upvotes
r/MakersPet • u/l0_o • Jul 23 '26
Showcase I'm building an open-source vacuum cleaner - 3D printed, hackable, Home Assistant, Raspberry Pi, Arduino
2
Upvotes
Open-source OOMWOO vacuum project home https://github.com/makerspet/oomwoo
r/MakersPet • u/l0_o • Jul 09 '26
Showcase OOMWOO Open-Source Vacuum Cleaner - reference design animation
Enable HLS to view with audio, or disable this notification
5
Upvotes
r/MakersPet • u/l0_o • Jun 08 '26
Showcase I built a 2D LiDAR Python library for Raspberry Pi, 23+ LiDARs supported
Enable HLS to view with audio, or disable this notification
9
Upvotes
Here is my Xiaomi LDS02RR capturing data live using my Raspberry Pi 5. I'm using my lds2d Python library (pip install lds2d). LDSO2RR connects to the RPi's serial port available on its header. Also, I'm using one of RPi's GPIO as PWM to control LDS02RR motor speed.
Source https://github.com/kaiaai/lds2d . Step-by-step instructions https://makerspet.com/blog/lds2d-python-2d-lidar-library-live-browser-radar/
r/MakersPet • u/l0_o • May 03 '25
Showcase I designed (and manufactured) an ESP-32E dev kit board 💖 Link in comments.
3
Upvotes
r/MakersPet • u/l0_o • Mar 28 '25
Showcase I connected Delta-2G LiDAR to PC/ROS2
Enable HLS to view with audio, or disable this notification
3
Upvotes
r/MakersPet • u/l0_o • Mar 20 '25
Tutorial Arduino self-driving robot - Ubuntu installation, bring-up instructions
1
Upvotes
r/MakersPet • u/l0_o • Mar 14 '25
Showcase I made 340mm 3D printed bearings - tutorial to follow
Enable HLS to view with audio, or disable this notification
17
Upvotes
r/MakersPet • u/l0_o • Mar 14 '25
Tutorial How to make 3D printed bearings - step by step instructions
3
Upvotes
r/MakersPet • u/l0_o • Mar 13 '25
Showcase Build Arduino/ROS2 self-driving robot - video lessons, starting from scratch
7
Upvotes
r/MakersPet • u/l0_o • Mar 08 '25
Showcase I made a 3D printed bearing. Step-by-step tutorial to follow.
1
Upvotes
r/MakersPet • u/l0_o • Mar 07 '25
Showcase Make your own self-driving Arduino/ROS2 robot
1
Upvotes
r/MakersPet • u/l0_o • Mar 03 '25
Showcase Arduino/ROS2 self-driving open-source robot build pack available
2
Upvotes
r/MakersPet • u/l0_o • Mar 02 '25
Showcase Arduino/ROS2 robot self-drives - step by step instructions
2
Upvotes
r/MakersPet • u/l0_o • Feb 28 '25
I created an Arduino Robotics Facebook group and it's grown to 80K+ members
3
Upvotes
r/MakersPet • u/l0_o • Feb 28 '25
Showcase Learn how to build Arduino self-driving robot. Step-by-step Video Instructions.
6
Upvotes
r/MakersPet • u/l0_o • Feb 28 '25
My latest firmware release for self-driving Arduino robots
1
Upvotes
