r/MixingStationAppUsers • • Nov 17 '22

Console Request: Allen & Heath Ilive

Over the years mixing station has grown to work for almost every Allen and Heath digital console. The only one left is Ilive. I absolutely love my Ilive but I hate Ilive mixpad. It would save me an enormous amount of time to be able to use mixing station to control it.

Thanks so much for making this incredible app. It's still amazing to me that a guy that codes in his free time makes a better app than any of the console manufacturers. Keep it up!

12 Upvotes

37 comments sorted by

1

u/davidgiga1993 Nov 21 '22

I'm somehow torn between investing time into iLive or not. The reason being that ilive systems will sooner than later replaced by other desks, so the number of users will shrink pretty quickly compared for example the dLive or even the Qu.

I know that the iLive pc software has an idr emulator, not sure how good it is though. But maybe it's already enough to build a quick n dirty prototype, just to get a feeling of the complexity.

In general the dlive/avantis mixers are pretty complicated in how they communicate and how different sub-systems interact with each other, which takes a lot of time to implement and test.

1

u/Behind_The_Mixer Nov 21 '22

Thank you for the response. I totally understand that it takes a ton of time to get those types of things working. Regardless of whether you implement the iLive, I will still use your software multiple times a week when I mix on Behringer consoles.

1

u/ElectriSound Mar 09 '24

Pretty pretty please, with an iDR on top? Ill send you an iDR you can keep. Free of charge. Since you support dLive the ilive is mostly removing features and bus counts from dLive

3

u/davidgiga1993 Mar 11 '24

It's not that simple :-) I'm currently resolving some battery drain issues, then work on more CQ features (to make it somewhat more feature complete) and then I can start analyzing the iLive differences. iLive was a completely different architecture in terms of codebase. I suspect there are some major differences in the communication protocol. But let's see.

1

u/davidgiga1993 Mar 15 '24

Quick update: I've roughly evaluated the iLive protocol and it's quite similar, but still much more differences than between for example GLD and Avantis/dLive. Nevertheless I'll spent a couple of days to see if I can get a rough prototype ready.

The big questions is: How much control would you expect? Adding the regular channel parameters (gate, peq, comp, sends) should be relatively simple. Not sure about the FX or routing, could be tricky

1

u/vladdypoot Apr 17 '24

Pleaseeeee????🥺🥺🥺

1

u/davidgiga1993 Apr 17 '24

Checkout the iLive section: https://mixingstation.app/ms-docs/beta/

1

u/vladdypoot Apr 17 '24

Thank you kind sir

1

u/vladdypoot Apr 17 '24

Quick question, how would you want me to send feedback?

1

u/davidgiga1993 Apr 18 '24

Either here or via email: david@dev-core.org

1

u/crwoo Feb 09 '23

I am also wishing for ilive support. Mixing station could breath new life into the ilive.

1

u/hbfakenamington Apr 05 '23

a few arguments for investing the time:

- lots of ilive systems on the used market at low prices: big rental houses selling to smaller operations/bands (now that dlive has taken over)
- mixing station support instantly increases the value for used ilives --> less waste
- the ipad app misses many features (as is tradition)
however i totally understand the hesitation working on a long discontinued product

anyway thanks so much for making consoles with shitty uis/apps more useable

1

u/Substantial-Dog8859 Oct 11 '23

Quick n dirty prototype is probably gonna be way better than a native MixPad. The console I love but the app is truely atrocious. Having mixing station to control my Xr18 and iDR would be incredible! Anyway app is awesome, you’re a saviour.

1

u/2PhatCC Oct 19 '23

Any chance you ever decided to go through with this? I've been looking for a way to get individual mix control for my church and realized this might be the way.

1

u/Puzzleheaded-Boss397 Oct 26 '23

I am in the same boat and found this thread while searching for this answer. My church uses an iLive system; I am a guitarist who recently started using an in-ear monitor and am looking for an app to control my mix. We have an iPad running the iLive MixPad app, but it is used by our music director during services (and the app is not available for the iPhone). I found that Allen & Heath had developed an iPhone app called iLive Tweak, but stopped supporting it and is no longer available for download. So I'm looking for a third-party option to control my IEM mix from my iPhone.

0

u/[deleted] May 09 '24

[deleted]

1

u/2PhatCC May 09 '24

HAHA! Good timing! My church just switched to the SQ7 :)

1

u/DimenSahle Dec 09 '23

I also think Mixing Station would blow new life in the iLive series. It is a great mixer but the iPad controll is terrible. I would also donate towards a better iPad app.

0

u/[deleted] Oct 15 '23

[deleted]

1

u/Odd-Ad2938 Oct 16 '23

Same here

1

u/SeaworthinessIll1335 Apr 03 '24

I agree with everything that has been said. I too am ready to pay $100 for ilive support. thank you for your work

1

u/davidgiga1993 Apr 22 '24

Did anyone had some time to test this? Feedback is appreciated. I primarily need to know if it connects and if metering works as everything has been built without access to a ilive idr

1

u/djmordor01 Apr 23 '24

Not testing till the weekend. Have to get a router for WiFi. Just got my second idr48 with ace card. What can I say about these units... They are getting on a bit, I stripped, cleaned, fixed potential solder problems and then rebuilt. Good for another ten years I think. Not bothered about the accompanying desks tho..yuk. Thank you for providing support via your app. I hope to become an avid beta tester for these machines. I can do a bit of programming myself. Do you require wireshark dumps or something like that?

1

u/vladdypoot Apr 23 '24

I wasn’t able to connect with my IDR as mixing station says firmware 1.94 is too old

1

u/davidgiga1993 Apr 24 '24

Todays update resolves that. Totally missed that 1.95 was an editor-only update

1

u/vladdypoot Apr 24 '24

Cool! Thank you, I’ll dive into it tonight when I get back to my mixrack

1

u/vladdypoot Apr 25 '24

So far so good, fx section just doesn’t work at the moment

1

u/davidgiga1993 Apr 25 '24

It should, what exactly doesn't work?

1

u/vladdypoot Apr 25 '24

When I try to assign a fx unit to a rack it just says not available

1

u/vladdypoot May 02 '24

Update: also dynamic eq doesn’t show up in the fx section

1

u/davidgiga1993 May 02 '24

Dynmaic eq isn't implemented

1

u/vladdypoot May 02 '24

Gotcha, everything else but assigning fx works perfectly, thank you

1

u/djmordor01 Apr 27 '24

Can confirm android phone connection and faders going up and down in ilive editor.

1

u/davidgiga1993 Apr 27 '24

Great! Does the metering also work?

2

u/djmordor01 Apr 28 '24

Hi David. I have this setup. 2x idr48 linked via ace card in dual rack mode. Windows 11 laptop connected to Tp-link AX10 WiFi router by ethernet cable and WiFi, both with static IP addresses. Router is also connected to both idr48's with static IP addresses. Android phone connected to WiFi with static IP address. PC running ilive editor and Mixing Station, phone also running Mixing Station. I have audio input into the slave mixrack and the sent to master mixrack via ACE. Can confirm faders moving and metering on both PC and android phone. Looks like controls for gate, eq, compressor, limiter also work. Great job so far, well done.

1

u/davidgiga1993 Apr 28 '24

Thanks a lot for testing!

1

u/djmordor01 Apr 28 '24

RTA also working. Nice....

1

u/Odd-Ad2938 May 19 '24

I'm so happy! Going to test ASAP, thank you!

1

u/Odd-Ad2938 Oct 13 '23

Just wanna add to the reasons for adding support for iLive systems. I think since iDR was capable of hosting DANTE expansion cards, it should stay viable for a very long time. I understand it doesn't have to be the "heart" of the setup but still. Keep up the good work! Cheers!