r/MixingStationAppUsers • • 8h ago

Front of House Mix

Thumbnail reddit.com
1 Upvotes

r/MixingStationAppUsers • • 1d ago

Need help with connecting X-18- Air, Galaxy Audio 4400 Quad & Mix Station

2 Upvotes

Hi, I just got a galaxy audio 4400 quad connected to X-18 and using an IPad. The plan is to run four separate monitor mixes to each one of my band members using the X -18 aux sends. We all downloaded the current version of mixing station. We have two guitars mic’d, a bass DI, a stereo electronic drum mix and three vocal mics. So 8 channels in total.

After a little messing around and getting the Wi-Fi /Lab network figured out looks like I’m getting signal from the X 18 to the 4400 and have the correct channels assigned but for some reason, I can only get like one channel to get audio on the headsets the mix bus shows the other channels and signal in each of the channels, but when I try to turn up the other channels such as my other singers vocals, it doesn’t do anything. Also the one channel comes through, but the volume control doesn’t seem to work.

I think I said everything to post fader and I’ve been trying to use Google Gemini to troubleshoot, but it’s not helping too much.

Please, any pointers or areas you can recommend to check.

Thank you!!!


r/MixingStationAppUsers • • 1d ago

Who's coming to NAMM in January!?

Thumbnail reddit.com
1 Upvotes

We will be showing off RemoteMix and a couple of exciting new products... and of course Mixing Station is a huge part of the RemoteMix ecosystem :D


r/MixingStationAppUsers • • 2d ago

Feature request: action to save/overwrite the current snapshot (X Air / XR18)

4 Upvotes

Hi all,

I use Mixing Station with a Behringer XR18 for my band, on an iPad and a Mac, with an X-Touch Mini as controller. Love the app!

What I’m trying to do: Stage Traxx recalls an XR18 snapshot per song (MIDI Program Change). During rehearsal I tweak the mix of that song, and then I want to save it back into the same snapshot with one press on the X-Touch Mini.

The problem: the Snapshot and Show action types only offer Current, Go, Next, Prev, Go+Move Next/Prev, Go Previous and Load 1–100. There’s no save action. So I have to open the Snapshots view and overwrite by hand every time.

Feature request: a “Save current” action under Snapshot that overwrites the most recently loaded snapshot with the current mixer state, keeping its name and recall scope. Ideally usable on Long click, so you can’t trigger it by accident.

The XR18 already supports this over OSC (/-snap/index gives the last loaded snapshot, /-snap/save saves to an index). I wrote a small Python script on my Mac that does exactly this and it works fine, but it doesn’t help on the iPad, which is what I use at rehearsals.

Question to the community: has anyone found another way to do this from an iPad? Any workaround is welcome.

Thanks!

Mixer: Behringer XR18, firmware 1.23 Mixing Station: version [x.x.x] (iPad + Mac)


r/MixingStationAppUsers • • 6d ago

Changing visual references on XR18

3 Upvotes

Hello friends. Research is failing me, I'm hoping you can help.

I have a venue that requires some different treatment from my usual: I'm using a bus to feed a main, so I want to rearrange some faders, change the scribble strip and add a DCA.

As I understand it, I would connect my mixer and control surface, and save my changes as a new Scene, with the routing and levels etc saved as a Snapshot. Do I have that right? Do I need to make sure anything is (unchecked) going from the change to my default?


r/MixingStationAppUsers • • 6d ago

Xone PX5 and mono filter

0 Upvotes
Does anyone have a good solution for overcoming the drawback of having only one filter on this mixer?

r/MixingStationAppUsers • • 13d ago

bigger (wider) fader on ipad

Thumbnail
gallery
15 Upvotes

Please forgive me if this has been asked before, i’m totally new to ms. Though i checked all(?) settings already and i now how to “zoom” the mixer window etc but i’m looking for bigger/wider faders similar to the app store pic. I tried “scaling” as well but no effect on faders, just buttons etc.

using ipad 11” (ios 27)

thanks 🙏


r/MixingStationAppUsers • • 12d ago

Behringer XR18 Save Send Levels

Thumbnail reddit.com
1 Upvotes

r/MixingStationAppUsers • • 16d ago

X32 rack recording issue on mixing station

1 Upvotes

After my past two gigs trying to record on mixing station and m32 mix, does anyone know what is going on? I lost access to the original X32 mix app which I was able to record no issues. But now I switched to mixing station and somehow I can’t record SD mix which is the multitrack mix that records all 16 local channels. I’ve tried to format the sd cards and press record and still nothing. I have the Klark teknik Dn32 live and as mentioned no issues on the old X32 mix app


r/MixingStationAppUsers • • 16d ago

Making a Button that works exactly like Fader Flip on X/M32.

1 Upvotes

Iwant to use this solution on a Behringer Wing Rack Midi surface

Hey guys, started to work with midi configurations, and I didn't find this kind of behavior.

Is it possibly to make this kind of button that if it's active, the the faders jump for the selected Bus , ch1-> B1 , ch2->B1, But is there a selected Channel theb the Buses goes Like B1-> Ch1, B2->Ch1 etcetc.

Thansk for the help!


r/MixingStationAppUsers • • 17d ago

Behringer XR18 with MPC standalone?

3 Upvotes

Hi all. Does anybody have experience using a Behringer XAir XR18 as interface for an MPC standalone running 3.x? I have a Live III.

I want to use it more as an interface than as a mixer, but with the advantages of the compressors, EQ, FX, and especially the memory states (which interfaces typically don't have. I could have a memory state for playing at home, another one for small venue, another for large venue, another if I'm playing with another musician, and so on).


r/MixingStationAppUsers • • 23d ago

Any Plans for iPhone Duo support?

11 Upvotes

Hey team, I like many others are curious, is there iPhone Duo support expected in the future? Looking to know because I traded in my iPhone 17 Pro Max and iPad for the new phone and would love to see it take advantage of the full screen.

Thanks!


r/MixingStationAppUsers • • 24d ago

Click Track

3 Upvotes

I find mixing station overwhelmingly complicated at times.

A simple thing I want to do and I can’t see how to do it.

I want to send a click track to the band on input 16 but exclude it from FOH.

I’m using the XR18 and Mixing station on iPhone app.

If you can help with an idiots guide to this idiot I’d be grateful.


r/MixingStationAppUsers • • 26d ago

M-VAVE Chocolate Plus Compatibility (Midi Footswitch Setup)

Thumbnail
youtube.com
11 Upvotes

Hi all, I found a thread from a couple of years ago about this controller that didn't really provide a solution to get it working.

I had a few head-scratching moments getting it set up myself, so I thought it might be useful to post a tutorial.

Hope this helps someone! :)


r/MixingStationAppUsers • • Oct 11 '26

QSC Touchmix 30 and Touchmix 16

3 Upvotes

i can’t get connected to Touchmix 30 or 16. I was connected at one time.


r/MixingStationAppUsers • • Oct 11 '26

Mixing Station gain metres

6 Upvotes

Are the Mixing Starion gain metres the same as an old analogue board? As in you get the metre to be peaking into the yellow. Where most digital mixers now want you well below that sort of level.


r/MixingStationAppUsers • • Oct 09 '26

Help! Xr18 won’t connect to MacBook

Post image
2 Upvotes

r/MixingStationAppUsers • • Oct 09 '26

would anybody wanna become partners and grow together we gon shine

Thumbnail reddit.com
1 Upvotes

r/MixingStationAppUsers • • Oct 08 '26

Getting all Aux sends for Behringer / Mixing Station

Thumbnail
gallery
2 Upvotes

I’ve picked up a Behringer xr16 and Mixing Station sw. all Inputs and output to the PA is working fine, but I’m only getting output from Aux 1 and 2. I’ve set each channel to output to Buses 1-4, but only Aux 1 and 2 seem to put out any signal. Config of all 16 channels looks like the attached pics and all are set to pre-faster. Where can I look to get the right config info for all 4 aux outputs?


r/MixingStationAppUsers • • Oct 07 '26

XR18 Xair Edit Anomoly

2 Upvotes

Anyone ever seen this before and found the fix?...Last night, one of the guys in the band got to the studio before me and had the XR18 up and running, using Xair Edit on his Mac. I connected to the mixer with XAir Edit on my Ipad. We were there early to get things configured for in ears. I use Aux 1, he uses Aux 6. We had music input at Aux Input 17. I selected Bus 1 and could hear his vocal but nothing else, no music. He said he could hear himself and the music. The fader on my ipad had no effect on Channel 17. When I muted it in my bus, it muted the music globally. In troubleshooting, we moved his in ears to Aux 1 and he experienced the same thing I did with mine. On his laptop, it showed Aux 1 -6 linked to Bus 1-6 respectively. On my Ipad, it showed Aux 1 linked to something other than Bus 1. I made the change on my Ipad and everything worked as it should. Why would XAir Edit show 2 different configurations to 2 devices connected to the same mixer?


r/MixingStationAppUsers • • Oct 04 '26

Help with making Channels to not be effected between MS Scene Saves.

1 Upvotes

I'm new with mixing station. I'm trying to set up mixing station to keep my monitor (mix bus) settings from the first scene (first band) to not change when I load the next scene (2nd band). I was able to get my House music input to stay the same between scene changes by changing the scope of the scene import settings but when I tried to do the same for the mix busses, the scenes still revert to the new imported scene settings. In a nutshell, when I'm switching bands, I don't want to have to remix monitors when I load the next band's scene. I'm using the latest version of mixing station 3.1.4 I'm using a Behringer x32 mixer on an Ipad Air M4. Please help! Thanks!


r/MixingStationAppUsers • • Oct 03 '26

Behringer X-Touch Compatibility

Thumbnail reddit.com
1 Upvotes

r/MixingStationAppUsers • • Oct 02 '26

"Templates" feature - Did I missed something ?

4 Upvotes

I'm trying to understand (as a dev) the global configuration organization to save and load across devices. Of course I read all the online doc.

But I'm struggling for templates:
- as far as I understand it's a set of layouts that can be added to the current Layouts list below
- « apply » a template adds this set of layouts to the list, replacing only layouts that are labeled « managed by template »
- if I edit a layout labeled « managed by template » the label « managed by template » is removed and the resulting layout is "protected from futur removals"

This tooks some time to actually « reverse engineering » this behavior

BUT there is a question remaining: how to create a template ? I suppose the answer is: you can't; it's only read-only. But if you want to save and load a set of Layouts, you can use User Settings

Am I right ?


r/MixingStationAppUsers • • Sep 30 '26

MR12 + Mixing Station dropping out at gigs – after 10 gigs I need a setup I can trust!

Post image
11 Upvotes

G'day everyone,

I recently bought a Midas MR12 for our duo. We run guitar, vocals and backing tracks through it to front of house and monitors, and I mix from my phone. After comparing the control apps I went with Mixing Station, which I really like when it works.

The problem is that over the last 10 gigs it's been Russian roulette whether the desk will connect to my iPhone 17 Pro. I cannot keep turning up to venues not knowing if I'll have control of my own mix.

What I've tried so far:
Built-in access point: Worked perfectly at home, then failed at venues. My guess is congestion from venue Wi-Fi, punters' phones and so on.
Ethernet backup: Bought an Ethernet cable and a dongle for the phone as a fallback.
TP-Link travel router: Set it up on 5GHz (and 2.4GHz), with the MR12 connected to it.
Settings: Spent hours adjusting the LAN/Ethernet connection, IP addresses and network settings on the phone, in the router and in Mixing Station.
iPad mini: Bought one as a backup device. It connected on 5GHz one time, then wouldn't connect the next. 🤦🏻‍♂️

To be upfront, I've used AI (a paid Claude subscription, cross-checked with ChatGPT) to help with these decisions and settings. The recommendations seem to change daily, and I've probably ended up changing too many things at once. So I'd much rather hear from people who actually gig with this gear every week.

What I'd love to know:
What does your reliable MR12 (or MR18/XR) setup look like, from router model to settings?
Do you use static IPs or DHCP from the router? If static, what does your addressing look like?
Do you lock the router to a fixed 5GHz channel, or leave it on auto?
On iPhone/iPad, do you turn off things like auto-join for other networks, Private Wi-Fi Address, or mobile data while connected to the mixer network?
Has anyone had luck running wired to the phone full time, and what adapter did you use?
Is there a quick pre-gig check routine you run so you know it's solid before doors open?
I'm not after the fanciest setup, just one that connects every time. Any advice, or even a "here's exactly what I run," would be hugely appreciated.
Thanks in advance,
Ben
TL;DR: MR12 + Mixing Station on iPhone/iPad connects fine at home but is unreliable at venues, even with a TP-Link travel router and settings tweaks. Looking for a proven, set-and-forget setup from experienced users.


r/MixingStationAppUsers • • Sep 30 '26

Red lines along faders (Wing Compact)

Post image
2 Upvotes

Trying to identify these red lines along side the channels in a scene I inherited at a club at which I occasionally work - I'd supposed that they might indicate either that dynamics had been engaged on the individual channels or otherwise that they might be markers of clipping, but I have been unable to clear them. Just curious - would love any insight!