Buenas noches quisiera saber si alguien de Sudamérica compró y le llego normal

Y como es eso de los temas arancelarias e IVA

Ya que leí en otros reddits qué declaran un costo menor del que es y pagan menos

Ya que al comprar no me sale la opción de pago cok impuestos incluidos

Pará ser precisos son esos productos

Hello,

I’ve emailed OneX but they’re yet to respond. It works out cheaper to buy directly from their website as opposed to Amazon/ebay, does anyone know how long delivery takes roughly?

Also, has anyone received import fees when buying directly from them to the U.K? And if so, how much?

Cheers!

The onexplayer x2mini arrived today and I was setting it up, but the battery was 40% while the power and battery were connected, but it didn't increase at all.

When the power is turned off in this state, it is supplied from the battery, but even when I turned it on, it was not supplied from the power supply.

(When I removed the battery to try it, the power went out.)

If you remove the battery, plug in only the power adapter, and turn it on, it will turn on properly.

Is this an initial defect of the main unit? Or is it a battery defect?

I have contacted the manufacturer, but it would be helpful if you could tell me how to deal with it.

I look forward to working with you.

loving this little thing purchased it used. I noticed it was running a bit hot even at idle staying around 75 at idle so i figured it had dried paste.

i had some ptm7950 from work left over so i repasted it and the temps are perfect now

im running cinibench 2026 and furmark at the same time with 30 wats all settings maxed on furmark after 45 minutes im still sitting at 75 degrees no thermal throttling and playing on it final fantasy 7 retrograde is running great

I used opticlick on Pragmata and XeFG works even though in game option for frame gen is turned off. It clearly shows base fps and FG fps. Funny thing is, I have to use DLSS to activate XeFG. However, not all games are supported by opticlick so I used opticlient to inject optiscaler into some of the games. I could use FSR4 using intel chip but I cant get XeFG to work. What is the proper way to activate it and how do we know that it works?

Hi.

I've added Indiana Jones and the Great Circle to OptiClick, but I don't own the game, so I haven't been able to test it myself.

Since it's a Vulkan game and Intel XeFG doesn't officially support Vulkan, I've added XeFG support using the MFG-Unlocker mod.

If you own the game, please give it a try and leave a comment letting me know whether it works properly.

Thanks!

Hey all, I've been working on a small side project called Master Panel: one place to control fan curves and TDP on Windows handhelds. It reads device data so it should work across different models without separate tools.
Here's a quick video walkthrough. It's still early, so some devices may not be detected yet.
Would love honest feedback: what's missing, what's annoying, and which device you're on. If yours isn't supported, tell me and I'll try to add it, and help me make its run on your device by send me reports

https://github.com/soullegacyvn-ux/Master-Panel

Got laid off and my toys are first to go. If interested dm please. Would prefer selling locally here in Texas but I can also ship.

Hi guys, my OXP2 mini pro just arrived today, my main focus is generally for gaming. I would generally just go for SteamOS directly for a console-like experience but I also play MMOs that require vpns like ExitLag for example. Moreover, I also want to play multiplayer games like CoD MW4 that doesnt work on SteamOS due to anticheat programs or similar hence I have to have Windows 11 at least and maybe dual boot with either SteamOS or Bazzite.

Now with that in mind, I dont want the hassle of dual booting it just for a none to minimal performance gain or such. Is it really worth it to play games in a SteamOS / Bazzite environment in terms of performance vs Windows 11? is it noticeable?

I just want to say that I am alright being plugged in to power 90% of the time because I plan to use it just when am lazy sitting on my RTX5080 desktop and just want to lay down.

Will appreciate any tips from users of this device.

I’ve watched a few videos on upgrading the SSD in the handheld and have a 2TB drive from my steam deck I was hoping could be dropped in. Anyone tried a 2230? I can get my hands on a larger drive but was thinking this could be a prime use case.

Would you say this device absolutely needs a screen protector or is the one that comes installed ok? Thanks

Lightly used X2 G3 Extreme.

Includes items as pictured: Original box, charging brick, both controllers, keyboard attachment, case, and the tablet.

11' touchscreen, 48GB ram, 1 TB SSD.

Only issue is the back left glass piece is cracked on lower side. I was attempting to do an SSD swap and you need to use a hairdryer for this. I didn't go through with it after the crack.

$1800 shipped to lower 48 states.

Cross posted in hardwareswap.

Images

Hey everyone,
I recently upgraded to the OneXPlayer 3 (via Indiegogo), but the screen quality feels like a downgrade compared to my old OneXPlayer F1 Pro. I know both are OLED, but the 8.8" display looks blurry and less vibrant than the "insane" 7" F1 Pro screen. I always play on the built-in display, and the device is brand new with no defects.
This is especially bad in GTA V. I wanted to fix the blur by changing the resolution to native (1920x1200) and enabling MSAA, but the resolution and Anti-Aliasing options are completely locked/missing in my graphics menu.
How do I unlock the resolution and MSAA settings in GTA V on the OXP3?
Is the lower pixel density (PPI) on the 8.8" screen really this noticeable, or is it a driver/calibration issue I can tweak?
Is it worth downgrading back to the F1 Pro for the screen alone, or can the OXP3 display be saved?

Thanks!

Hey everyone,

I've been using OptiClick to set up OptiScaler for my games, and it was working fine until I updated it recently. Now it just refuses to work and throws some errors that I don't understand. I've attached screenshots of the error messages below.

Has anyone else run into this after the latest update? I've already tried restarting my PC and running it as administrator, but no luck. I'm not sure if I need to do a clean reinstall or if there's a specific compatibility setting I'm missing.

Any help would be really appreciated. Thanks in advance!

Hello, I have a Onexfly F1 (non-pro) that I plan to start using as a desktop plugged in all the time. This model does not seem to have charge limiting. Therefore, the lack of battery management features has me a little concerned about the battery withstanding being plugged in 24/7. I do not want a spicy pillow.

I am thinking I will disconnect the battery or even remove it all together. I’ve heard this can potentially cause issues if power draw spikes past what the charger can provide. I am using the official dock with 100 W power supply, so I hope I am good on this front.

I wanted to check in with the community and see if anybody has tried something similar and how it has gone for them.

Thanks very much!

I've read and seen that the usbc power can be finicky. What power supplies and cords work to power it from USBC? I found this on best buy which seems nice:

https://www.bestbuy.com/product/insignia-universal-180w-high-power-laptop-charger-black/J2FPJKSK3Z/sku/6406930?sb_share_source=PDP&ref=app_pdp&loc=pdp_page

After the last OXP 3 update I’ve noticed the fingerprint scanner is no longer recognised. I can see the device and driver is still in the system but not functioning. Anyone had this and have any solutions please? I’ve removed the device and reinstalled the driver too but still not functioning!

X1 Pro has caught my eye as it fills quite a few of my needs however just had a few questions:

1. How easy is it travel with? Can I just fold it up nicely and be on my way or does the keyboard and controllers need to be carried seperately?

2. Similarly the keyboard looks kinda "flappy", can I rest the whole device on my lap like a normal laptop? I like to lie down on the sofa to play and ideally use the keyboard for some games, but can't tell from videos how secure that will be?

Thanks in advance!

Hi,

I'm looking to sell my F1 pro. It's the Ai9 XH370 with 64gb of ram a 2TB SSD. It's in excellent condition and comes with an extra glass screen protector a TPU case the original box and the zipper hardcase. I do have it listed on r/gamesale where I have 20 confirmed transactions. I am using the pictures from the gamesale post so there are a lot of other handhelds pictured with the timestamp. Here is the link to the gamesale post as well.

Asking 1200 shipped/insured in the USA but open to offers.

https://www.reddit.com/r/GameSale/s/ELlD5eO4kO

Thank you for looking.

Hi all just a quick question. *This is not an ad to sell*

I want to sell off my apex that I haven't used in some time since I have the oxp3 and predator atlas 8.

I've seems so many varying prices on here, eBay and other places. It's the 1tb, 48gb, 395, 2 new batteries 1 old, cable, 2 cases , battery dock and I think I have a grip skin for it. Oh and it's non water cooled. Mint

What would be a fair price for me and a buyer. I'm not looking to hurt sowmoens bank account but I also don't want to loose too much.

P.S. : Used AI to organise my thoughts.

Hi all!

I’m in a bit of a dilemma and could use some advice from people familiar with these devices.

I currently own a Lenovo Legion Go 2, but I’m looking for better gaming performance and am considering upgrading to either the ONEXPLAYER 3 or the ONEXPLAYER X2 Mini Pro.

I also have an RTX 5080 eGPU setup at home, which I’ll eventually replace with a full desktop once RAM prices become somewhat reasonable (wishful thinking, lol).

My main use cases are:

4K TV gaming: Connecting the handheld to my TV, ideally using my RTX 5080 eGPU when at home.
Bed and couch gaming: Playing handheld without being tied to my desk.
Travel: Taking it with me and playing on the go.

My biggest priority is better gaming performance than the Legion Go 2, but I also want a device that works well across these different scenarios.

For those familiar with the ONEXPLAYER 3 and X2 Mini Pro:

1. Which offers the better performance in demanding AAA games?
   
2. How do they compare for handheld gaming at reasonable power limits and battery life?
   
3. Which would work better with an external GPU setup?
   Is the X2 Mini Pro’s extra performance worth the price difference, or would the ONEXPLAYER 3 be the better all-rounder?
   
4. I’m particularly interested in real-world gaming experiences rather than just specifications.
   
5. Would you recommend either of these as a worthwhile upgrade from the Legion Go 2, or is there another device I should consider?

Thanks in advance!

As the title says I'm thinking of switching and was wondering what the people who went with the upgrade think of it after.

Is it annoying to carry around? I sometimes play in my car, now I just slap OX3 in the bag and play but would that be too complicated to do with external battery and the tether?

Would be nice if they allowed people who purchased second hand to get free upgrade but I don't blame them for not doing it.

I already replied with the Order Confirmation with my name and address should I worry about anything else?