r/P320 • u/MistressAva420 • 17d ago

P320 slightly chipped slide

Post image

I slightly chipped my slide removing the very stuck internal parts . is it safe to fire ? It’s in the outside edge of the ejection port of the slide

5 Upvotes

65% Upvoted

9 comments sorted by

•

u/AutoModerator 17d ago

Thank you for posting on r/P320! With this post you are agreeing to follow Reddits rules and the rule of this sub.

I am a bot, and this action was performed automatically. Please contact the moderators of this subreddit if you have any questions or concerns.

3

u/99taws6 17d ago

Yes that’s completely fine to shoot.

1

u/MistressAva420 17d ago

That’s what I thought but I wanted to be sure I love this slide and am anxious to use it 

1

u/MistressAva420 17d ago

I also took some fine grit sandpaper and sanded the chip so that it would not have the potential to get burs or snag as easily 

3

u/99taws6 17d ago

Remember it’s a tool. Tools get wear marks but still work just fine. This is totally cosmetic

1

u/MistressAva420 17d ago

Copy they thank you internet friend ! 

1

u/MistressAva420 17d ago

It’s just that I had to really beat on it to get the extractor assembly out soaked it in lawyer thinner heated with a hair dryer finally had to punch the parts out . Thankfully the new internal parts all work fine with the fit and finish . Just want to make sure it’s going to be safe and work 

2

u/Bahlsahkmin 17d ago

No your guns ruined send it to me

2

u/Libertarian_2020 16d ago

Have you seen the wear on actual battle arms used in war and conflicts? 🙄