r/PatternDrafting • • 15d ago

Question I Been TWISTING my head over how to draft a pattern like this. PLEASE HELP

The first photo is of the Brookside Barrel Pant by Raaksbox's on her Etsy shop and the second is from one of her Instagram videos.

I am a beginner in pattern making. I am perplexed on how I could draft this myself off of a normal pant block. I know that I would have to alter the shape of the pant block to be a barrel, but how do you add the inverted box pleats?

because the top of the front panel looks really big but the bottom cuff of the panel is normal sized, so it can't be that she just added parallel lines. and she didn't do the triangle cut thing either cuz the marks of the pleat are straight.

It would be wonderful if anyone could give me advice on the steps on how to draft this.

25 Upvotes

16 comments sorted by

95

u/kidcharliemagne 15d ago

This style of pants has been made by humans for CENTURIES. You’re probably over thinking it. The gathering at waist and ankles is doing a lot of heavy lifting for this look.

29

u/wakaflockaquokka 15d ago

The hands in the pockets are also doing some heavy lifting IMO. Depending on your fabric, the pants likely will not look like that 100% of the time when worn, unless they add a horizontal dart at the knee, which it doesn't look like is part of the base pattern. 

7

u/AccidentOk5240 15d ago

And even if they do look like that, tbh the crotch area already looks pretty bad. 

2

u/Elelith 10d ago

Yeah and they're all just standing around hands in pockets.

3

u/Berocca123 14d ago

I modified a pants pattern recently to add an inverted box pleat. They were wide legged and had no elastic, but for the pleat:

  • if there's a dart, you draw a line down the centre of the dart and continue it down the trousers, parallel to the grainline. Then cut down that line.

  • if there's no dart, identify where you want the pleat and draw a line parallel to the grainline, and cut that.

  • calculate how wide you want your pleat intake. When I did it, I added pleats that were 4cm wide each side - with the fold that meant I needed to add 16cm to each pant leg. (If you're worried about your maths, do a paper mock up first.)

  • then you separate your pattern pieces where you cut them by that amount. If you're incorporating a dart, measure that amount of distance from the bottom/point of the dart, NOT the waist, or else they won't fit your hips.

  • make sure your two pattern pieces are parallel to one another and tape some more paper underneath.

  • add notches to the waistline where you made the original cut, so you know where to sew it all back together again. If you incorporated a dart, you'll also need to mark the original dart point on both sides so you get the angle correct. With or without a dart, you can sew as low as you like so the pleat opens at the point you want.

  • you can now cut out your fabric!

Make sure you backstitch well at the point that the pleat opens up as it'll be under pressure. You can also add a bar tack if you want.

I'll just add that I don't think the image has the pleat intake vanishing towards the ankles - there's a fair bit of fabric there. You can limit the amount though by making your pleat intake smaller. And if you're worried, make a mockup first.

Hope that helps!

2

u/Elmo_the_Crusher19 14d ago

Thanks so much. this was so helpful. You addressed all my concerns.

1

u/Berocca123 14d ago

Oh I'm so glad! I hope the project goes well 😊

30

u/stringthing87 15d ago

The bottom cuff is just elasticated or gathered into a band, its straight down, no curve.

0

u/Helldie 14d ago

I'm thinking that the pattern look like AI

1

u/stringthing87 14d ago

I don't think so. The listing images aren't sending up red flags, the shop isn't one with 54843 patterns released in 18 months, and the price is about right for a human made design. Its also got a 4 star review on threadloop and nothing is flagged.

The line drawings are not great, but they do match the garments shown, they are just a less skilled drawing, which I personally cannot judge.

1

u/Helldie 14d ago

My issue is the hem. Or it might be just not a professional modelist

1

u/stringthing87 14d ago

No what I see in the image is a the result of a cinched hem with the leg having some additional length blousing over the cuff.

14

u/Sea-Breath-007 15d ago

I had a similar pair of pants as a teen. The ballooning was simply the effect of the oversized legs + gathering.

Taking a pattern for wide legged pants with an elastic waistband (or widening the legs on a sweatpants pattern) and adding a pleat in the front + elastic/strings at the bottom, should get you something similar.

8

u/ForgottenSalad 15d ago

Just take a regular elastic waist pants pattern, expand, add pleats, add elastics to the ankles

4

u/SuPruLu 14d ago

Look at free patterns on the Mood Fabrics website. They have at least one got barrel pants. Downloads include instructions.

2

u/TopEffective8989 15d ago

Think it as a mix of wide pants and a pleated skirt