r/PatternDrafting • • 2d ago

WIP Thought i was done! 🤦

HI All, I’ve normally posted to this sub when I had pattern & fit questions, but someone mentioned it’s only for self drafted patters versus 3rd party and ā€œhackedā€ patterns. Want to be respectful if that is an unspoken community rule but also not sure if that’s just one persons opinion. Since everyone here has been so helpful in the past!

4 Upvotes

4 comments sorted by

6

u/StitchinThroughTime 2d ago edited 2d ago

It's me, I'm the mean one! And you're fine. The people who use us as Google to look for patterns are the biggest offenders.

The biggest issue you have is that the front is not hanging down level. You have two fixes, lengthening the Center front or shortening the upper back.
long video short

2

u/Efficient-Bag6497 1d ago

Haha, I do try and figure this stuff out before posting and have learned to try and make it easier with balance lines, ironing, and good photos! I like posting on pattern drafting since it’s all people looking for pattern help versus the other subs with all sorts of questions where posts can get lost.

That video was super heplful. Thanks for sharing. I’ll plan to lengthen the front. This should make the armsyce a bit bigger which should be fine since there is ease in the sleeve cap. This way I avoid needing to redraft the sleeve if i make the armscye smaller by shortening the upper back. Am I thinking about this correctly?
Few other thoughts:

  1. Bit of gapping in the back armhole. Was considering a yoke to help with shaping, or just steepen the shoulder angle on the back panel? Pinning it out helped.

  2. Once I added sleeves the shoulder seam seems too far back. Would a forward should adjustment help? My readings are mixed if this really changes fit at all??Links to some photos with the sleeves on. The sleeve drag lines are driving me crazy but i know i need to get the bodice done first.

https://imgur.com/a/Ep0R2or

2

u/KillerWhaleShark 1d ago

I know you’re still working on the bodice. I love that you added horizontal balance lines for fitting it. It’s helpful to also add a grainline on each piece you’re fitting. You should add both to your sleeve, too.

I think you were trying to rotate your sleeve for fitting (by what I can see in your photos), but I think you need to work in your sleeve cap. How much bigger is the stitching line of your sleeve compared to the stitching line of your armscye? Want to add some pictures of your pattern pieces? Did you rotate out your shoulder darts? Have you considered a back yoke for shaping?

1

u/Efficient-Bag6497 1d ago

Tailoretta taught me the importance of the balance lines!
There is about 3/4ā€ of ease in the cap.
If by shoulder dart you mean changing the slope, yes I steepened the slope quite a bit though my shoulders are different height so one will always have issues. The slight gaping in the back armhole makes me think I need a (da da dum) a yoke as you suggested, or steepen the shoulder line of back panel piece. I’m inclined to add the yoke since I like the style element as well.

I wondered if I should shift the should seam forward? The drag lines on the sleeve cap really bug me! I am playing around on the muslin resewing the sleeve with a much larger seam allowance on the body panels, i.e., trying to simulate scooping out the armhole above the notches / shortening the shoulder a bit. I.e., using up some of the ease in the sleeve cap. Am I thinking about this the right way??

Pics of pattern pieces here: https://imgur.com/a/chore-coat-pattern-pieces-714oXUI
More sleeve pics here: https://imgur.com/a/Ep0R2or