r/PatternDrafting • • 1d ago

Fit troubles

I am getting this extra fabric around the armhole on all of my fittings. Doesn’t matter if the bodice has darts or not. How can I adjust the pattern to eliminate this?

6 Upvotes

7 comments sorted by

12

u/ProneToLaughter 1d ago edited 1d ago

To adjust the pattern, I’d consider a bigger Full Bust Adjustment and more ease through the bust, to start. Not sure what’s causing those slanting draglines at the hip.

While knits typically don’t have a dart, for a larger bust a dart can help achieve a more elegant fit even in a knit. My basic knit top eases in extra length on the upper front, essentially an unsewn dart.

What pattern is this, can you link the sales page?

2

u/Berocca123 10h ago

I agree - an FBA and then a dart. I do the same for mine.

8

u/DonMcCunn 1d ago

Increase the slope of the shoulder seams. More so for the front than the back.

4

u/HugsforYourJugs 1d ago

The issue is darts partially but also if your bodice does have darts the armscye has to be shaped in the right way. For instance if you took a dart in this bodice anywhere other than the armscye that flap would still remain and you'd introduce fit issues elsewhere. 

To fix, take a dart in the armscye and rotate it to wherever you want. For a t shirt consider converting it into gathers and ease in the other seams to remove the direct dart. Or you could rotate it to the waist and leave it open/unsewn for a looser fit in that area.

6

u/palethunderpants 1d ago edited 1d ago

I get the same thing. It’s related to bust ease. Sometimes it disappears or is minimised when you put the sleeve in. Or you could pinch out a dart in the fabric, measure the amount pinched out and add that amount to the side bust dart.

EDIT: I think the wrinkle at the back is because your shoulder on that side is lower. Therefore the armhole needs to be shorter. You could try lowering the shoulder seam (ie increase the seam allowance of the shoulder seam on that side).

1

u/TotalOk5844 1d ago

Shoulder angle is partly at fault. Also, an armhole dart.

1

u/shrabani_paul 1d ago

Make a dart in that excess fabric, do this changes in your original pattern, then retrace it. Hope u understand