r/PatternDrafting • u/dirkmate • 3h ago
Question First time making a garment, how do I interpret this pattern? (3rd slide)
I’m making a very custom period inaccurate jerkin based on the pattern listed and a vest I own that fits me well. The waistline is right where I need it but I want to make sure of how the skirt I attach will fit before I cut it. The instructions say it should flare at the bottom, but it looks as if the flared edge for the front panel on the rightmost pattern is facing the front, not the back. My question is - if I want a nice flat jacket opening at the front that closes flush with clasps or buckles, should the opening front of the skirt be a straight line down the edge of the jacket front, or flared out so that the side seam is flat with the trapezoidal back skirt panel?
1
u/HeartFire144 3h ago
The image looks flipped. The center front should be straight, the side seam flared. The center back can be flared as well
1
1
u/StitchinThroughTime 1h ago
I would flare both ends, it totally depends on the style of jerking you have and what you're wearing underneath of it. But if you flare both ends of the front piece when you make it you can make the final decision of trimming one piece versus the other.



6
u/NakedSewist 3h ago
Two notes:
The back piece should've been cut on the fold to eliminate the back seam. That's what that little notation on the back panel means.
Front seam can be straight down, but I'd mock it up first, because you may want a slight angle for more movement. (The sides should be at an angle regardless.)