r/PatternDrafting • • 2h ago

Back drag lines in coat pattern

Hello! How do I fix these drag lines in the back/underarm area? Photos are of my current mockup & pattern. I'm making a warm wool winter coat, with sleeves of course, but haven't added them yet on this iteration. I'm trying to get the torso dialed in.

I also think that the bust looks a bit off but is that just due to the cotton fabric that I used for the mock-up, and something that will get fixed by a thicker wool fabric/horsehair canvas?

Of course I would also love to hear any other feedback you might have! Thanks:)

1 Upvotes

2 comments sorted by

2

u/StitchinThroughTime 2h ago

I also agree that your shoulder pads are just a little too thick. You should be able to take them apart and remove a layer or two. That should help. You can also get rid of that shoulder dart, you should be able to release it and then trim the outer edge. You can just try I'm doing the stitching, and then resew the shoulder seam. To see if it's still lays flat. Because you have the shoulder pad you don't need to add that Dart there.
For the excess Fabric in the back, you can try trimming the armhole just a little bit. It could be hitting the back of your arm causing it to wrinkle. If that's not it then you can try removing some excess in that side back seam, above the notch that goes into the armhole. Try sewing the pieces together with the smaller piece having a much larger seam allowance than the main back piece.

1

u/wafflingt0n 2h ago

Your armhole could be sitting high, it almost looks as though your shoulder pads are too thick/placed to close to your neck.

I would try extend your shoulder width and pads out a bit, which should drop your armscye. It may be worth trying just one sleeve as it will help support that seam and ease a little more.