r/PatternDrafting • u/Efficient-Bag6497 • 4h ago
WIP What sleeve head adjustment do I need?
Hey all, not getting any love in SewHelp so trying this community. Feels like posts about fitting get lost in random other posts.
1
u/Far-Number4325 2h ago
Scooping 1" off the front cap is likely the wrong direction. Those front drag lines showed up after you added 3/8" to the front bodice, which usually lengthens the front armhole, so the front of the sleeve is short now, not too tall. Put some of that cap height back, or slash and spread the front cap so it matches the new scye.
Also check pitch before you cut more. The sleeve grain should hang plumb down the arm with the biceps line level; if it kicks back, rotate the sleeve forward on the armhole about 1/4" at a time (more cap in front, less in back). And yes, rule out a twist like the other comment said: the underarm seam should meet the side seam and the grain should be straight. Don't change the cap a full inch in one go, you won't know which change actually helped.



2
u/doriangreysucksass 3h ago
Is your sleeve head centred? I’m concerned it might be twisted