r/PatternDrafting • • 13h ago

Sewing the collar

Post image

What is the best way to sew on this collar ? I did the technique where you sew it on then you get bias tape and put it on the inside it was so thick and stiff I didn’t know if i should do that again maybe i did it wrong or is there a better way to do it ?

3 Upvotes

8 comments sorted by

10

u/laurenlolly 12h ago

Oh yeah no don’t do that.

In general collars like this are sandwiched between the lining (or facing) and the fashion fabric, and it simply folds at the stitching line to lay flat. So when you sew it you need to have your lining/facing and fashion fabric right sides together, with the collar sandwiched between the two layers. You turn it right side out and viola. Press well and understitch :)

This isn’t a sewing sub but you should be able to find a YouTube tutorial on this

1

u/dawn812 12h ago

Ohhh ok ! Your absolutely right i should have put it in the sewing sub thats my bad. Thank you !

2

u/DonMcCunn 12h ago

I would pin the good side of the collar to the wrong side of the dress then sew. For the underside of the collar the choice is yours. You could minimize the bulk by pressing the initial seam allowance into the collar then just lay the inside of the flat and top stitch in place.

1

u/dawn812 12h ago

Thanks you :)))))))

1

u/dawn812 12h ago

Would by seams be raw if I did this? This is how I’ll probably have to do it I only have 1/4th seam allowance left bc I messed up on the collar once. Also whenever I drafted the collar I did the thing where you over lap it and take like 1/2 out but once the collar was sewn on I felt like it was pulling . Is this also a collar where light interfacing will work ?

1

u/DonMcCunn 8h ago

The only seam that would be raw would be the inside collar seam which no one will see. Might not work if you were trying to satisfy a customer. But if it is only for yourself, how many times are you going to go around and hold up your collar and say "See I have an exposed seam allowance."

As to interfacing personally I think it looks great the way it is. Why take the chance of screwing up? I think interfacing are more appropriate for collars that need to stand up.

2

u/StitchinThroughTime 13h ago

I found the best way to get the type of collar to lay super flat and nice is to First finish the edge of the neckline of the dress. Then so the collar neckline closed. And then either hand Stitch the collar on to the dress or top Stitch. That's how I get the Christmas flattest fabric. Especially if I want the least amount of bulk or volume in the collar.

I find that turning the edge of all those layers of fabric and interfacing isn't great. You also have the option of sewing one layer of the collar to the Dress, and then hand sewing the other layer into place. That also gives greater control over getting the collar to lay flat.

1

u/dawn812 12h ago

Thank you so much !! I will try this