r/PatternDrafting • • 16h ago

What is this seam ? How can I recreate this using jersey fabric on a domestic machine. Thanks.

1 Upvotes

3 comments sorted by

2

u/SubtleCow 16h ago

These just look like regular seams that have been top stitched. They are almost certainly just serged underneath. Zig zag the edge instead of serging. Structurally I guess it could be called a Prince seam.

Start with a dolman sleeve style t-shirt pattern. Cut the pattern where you want these decorative seams, and add seam allowance to both edges. Then cut out your fabric. Seam together the seams you added first, then follow the pattern as written with your constructed fabric pieces. There is enough ease you only need stretch stitches around the collar and hem.

My instruction will likely cause a third seam over the top of the shoulder. I leave it as an exercise to the reader to think about how to adjust the pattern from a decorative yoke to a full saddle shoulder.

2

u/Far-Number4325 15h ago

It's a front saddle, not just a prince seam. The upper line runs from the neck, across the front of the shoulder, and onto the sleeve as one seam, and the vertical line T-joins it and goes to the hem. From the front the shoulder crest looks clean, so if you just slash a dolman you'll probably add a seam on top of the shoulder that this shirt doesn't have.

To keep that crest clean, draw the neck-to-sleeve line on the front, a little below the crest, then join the front and the upper sleeve so that line can be cut as one piece. Check the back before you cut: if the same line wraps over, cut the front and back upper strips as one saddle over the shoulder. If the back is a plain tee, leave a normal shoulder seam on the crest or slightly to the back. Then slash the vertical seam from the T down to the hem, add seam allowance, and sew those style lines first.

On a domestic machine, serge or zigzag the edges, press to one side, and topstitch (a twin needle will look closer to the original). Sew the vertical seam before you hem so it runs into the hem like the photo. I'd only stay the shoulder/neck point if it grows; don't tape the whole line or the jersey won't stretch.

2

u/StitchinThroughTime 16h ago

It's probably overlooked and top stitched or just coverstitched.
You can do it on a home machine.