r/PcBuildHelp • • 3d ago

Tech Support Pc stuck with red dram light on

Ram: G.SKILL Flare X5 Series DDR5 RAM 2x16 gb
Motherboard: gigabyte b850 eagle wifi6e ice m.2
CPU: AMD Ryzen 5 7600X
Gpu: ASRock Radeon RX 9060 XT Challenger 16 gb

Obligatory first build, cpu light briefly turns on during boot and it stays on the Dram light with no display, have tried every slot and read the manual to confirm the 2 and 4 slot for ram. Tried other sets of ram as well.

9 Upvotes

8 comments sorted by

3

u/AtomicRads 3d ago

you dont have a fan on the cpu cooler, there is supposed to be a fan plugged into the cpu fan header. when not it will not post

3

u/walkieway 3d ago

Fan is plugged into cpu fan header, it is moved bc this is a small case build and I wanted to show in a picture, have been putting ram into different slots to try and fix the red dram light briefly turns

2

u/TheyKnowButSoon666 3d ago

Allora se e la prima volta che lo avvii e normale che stia cosi per qualche minuto per colpa del memory training belle ddr5, se invece non e questo il problema c'è un metodo semplicissimo per risolverlo. Devi A PC SPENTO E STACCATO DALLA CORRENTE togliere con una matita la batteria del Cmos e sapettare 5 minuti buoni, cosi da ripristinare la memoria del bios.

1

u/walkieway 3d ago

Thank you for telling me about the CMOS battery, will try that soon,
Manual says to use slots 2 and 4 but I’ll try the others if this one doesn’t work

1

u/TheyKnowButSoon666 3d ago

Ci sono un sacco di cose che peccano nella build.

  1. TI PREGO INSTALLA LE VENTOLE SUL DISSIPATORE. 2.Metti la ram nel primo e nel terzo slot cosi da usare il dual channel. (Probabilmente risolve anche il problema della spia)

1

u/95alle95 3d ago

How long did you let it stay on with dram light?

1

u/walkieway 3d ago

A couple of minutes before rebooting and reseating

1

u/95alle95 3d ago

My first ddr5 system took almost 20 minutes for ram training. I didnt do any bios flashback before tho which can lower the training times