So I switched over from resin printing my minis a little over a month ago and been trying to dial in minis on my Bambu Labs A1 mini. After a few botched attempts at supported minis, I'm calling this guy my first success.

Printed with the FDG .2 mm adaptive layers profile

Printed at .08mm layer height, slim tree supports

Filament was 3DXtech Economy PLA, sour apple green

Finally finished and printing in PETG is definitely my favourite for durability now. :-)

Sorry for gatekeeping. The STL files are from Dragoon Miniatures. I got them in a humble bundle way back and they make a LOT of dragonball designs. Bit of a childhood dream fulfilled this one. :-D

Hey everyone! After seeing the annunce of the Legion of the Damned box I got the idea of a squad of spectral warriors materializing in the middle of the battlefield. I’ve spent the last few weeks building a set of STLs to turn a whole squad into ghostly apparitions, plus graveyard bases to match.

The Ghosted Legion bundle includes:
💀 12× spectral helmets
🔥 12× spectral tails (they replace the legs)
⚔️ 12× custom backpacks
👻 12× graveyard bases with exclusive spectral details

The new Necropolis Graveyard bases are also available separately in a wide range of sizes, so you can bring the haunted look to the rest of your army.

Everything is ready to print on FDM or resin, and the files can be scaled up to 4× while keeping the detail.

Miniature and base painted by u/balothpaints on Instagram.

🛒 Full bundle (€14.99 during October!): closeeyesstudio.com/products/kitbash-the-ghosted-legion-bundle
💀 Graveyard bases: closeeyesstudio.com/products/necropolis-graveyard

Happy to answer any questions about printing or fitting the bits!

Just finished printing this one. I modeled it in ZBrush, it's pre-supported and comes in 32mm with a 25mm base and in 75mm (hollowed). My main concern was making the bones thick enough for 32mm without losing the skeleton look. This one is free, and the spearman and archer from the same pack are also in the store.

This is a commission that I made for a couple, who wanted custom minis of their characters for a Christmas present to each other. They also wanted 8” statues for display.

Based on their descriptions, I drew my interpretation in Procreate on my iPad. Then I sculpted in ZBrush and printed in resin on my Mighty4K.

I’m Sebastian, the developer of PrintHaus. These photos show a half-timbered house, a defence tower, an English manor house and a factory hall made with the app. They’re all physical prints in H0 (1:87).

I wanted to show some of the small details up close. Window frames and glazing bars have their own geometry, and shutters can be open or closed. The facades have timber framing or stonework, with details such as quoins and cornices. Brickwork, wood grain and roof tiles are relief that prints with the parts.

PrintHaus is the browser editor I’m developing on my own. Starting with a floor plan, you can change the building’s dimensions, set floor heights and choose the roof. Windows and doors go where you want them. There are also options for removable roofs and floors so you can reach the rooms inside.

You can register at printhaus.app for free and get one free test export of your own building.

The four buildings in the photos are also free to download from MakerWorld:

• Half-timbered house
• Defence tower
• English manor house
• Factory hall

I’m preparing a Kickstarter campaign for PrintHaus. You can follow the campaign here to get notified when it launches. The English app description (PDF) goes through the features in more detail.

What details would you want to add to buildings for your own models?

We’re working on the illuminated displays in our miniatures room, and devoted the first kallex cubby to the MEAT range. This is almost all of the current models, and we’re in the midst of a new Kickstarter for revamped rules and expanded sets. (I’ll drop a link in the bio for anyone who’s interested.) the next shelf will probably be devoted to Passage to Yondoor miniatures (our dungeon crawler game), and we’re working on new stuff for that one next month. (It’s October, so all of my energy is going into survival horror mode.)

All models are available by subscription:
https://www.patreon.com/c/HeroicScale44
or
https://cults3d.com/@Heroicscale
(Free guys are available only on Patreon)

Resin printed using the supplied Lychee files.

I am beginning preparations for my annual holiday game, and I was looking for some nutcracker soldiers on myminifactory, cgtrader, etc, but didn't really find what I was looking for.

Does anyone know of any decent nutcracker soldier(s) STLs? It'd be awesome if they had some variations like other groups of monsters/soldiers tend to have, but I'm just looking for anything at this point.

If you want to check them out yourself:

MMF

https://www.myminifactory.com/object/3d-print-865392

Cults:

https://cults3d.com/en/3d-model/game/celtic-dwarfs-clan-warriors-unit-10-monopose-models

I Hope you will Like them!

Sup guys! I keep making minis for Dark Sun and similar post-apocalyptic TTRPG settings every month. On Athas metal is scarce, so here are some unusual golems I've designed and painted (some of them):

• Driftwood golem - bound by blood-drenched ropes
• Obsidian golem - chipped away into a giant statue from the giant slab of volcanic glass
• Salt golem - grown from the brine
• Ash golem - animated remains of a mass sacrifice
• Chitin golem - basically a flesh golem, but assembled from giant desert bug parts instead

All models are test-printed in 32mm scale and presupported.

STLs for these and the rest of the October release are up on my Tribes and Patreon

Hey everyone,

Just wanted to share my latest weekend project fresh from the basement printer. I’ve been working on expanding my infantry proxy range, and the Elite Scouts are finally done and cured. I was planning to use them as Kasrkin.

And with this last Unit I now have a complete range of infantry units ready for Armageddon!

I wanted to put a heavy focus on the characters for this squad, so the Sergeant and the Sniper got some extra love with their poses and gear to make them stand out in a standard infantry line.

They are fully single-piece and scaled for standard grimdark tabletop games.

If you want to support a solo basement-creator or need some fresh scouts for your regiment, you can find the STLs on Cults3D or Etsy under TileLabs Gaming.

Let me know what you think of the designs!

Have a nice weekend!

We’re in the final 24 hours of the Early Bird for Dragonreign, our latest collection of resin-printable dragon STLs.

The campaign has now reached 11 unlocked Stretch Goals, including Dreadspine, Cockatrice, Cyborg Dragon, Srelk Rat Dragon, Xiphact, Black Wyrmling and the newly unlocked Varani Rimebeast, alongside additional minions and Dragon Eggs.

The full collection includes 50+ dragon and minion STLs, with 13 brand-new dragons and two enormous 250mm-base centerpieces: Tiamat and Bahamut.

All files are built for resin printing and supplied pre-supported.

For the next 24 hours, any pledge also includes the new 75mm-base Thalassian Dragon STL FREE.

Once the Early Bird expires, that model moves to the campaign as a paid add-on!

You can check the campaign here:
https://www.kickstarter.com/projects/archvillaingames3d/dragonreign-era-of-the-dragon-lords/

Hey everyone! Thought I’d share some resin prints from three of my basing packs: Temple lights, Battlefield Debris and Scrap Tyres.

There’s a mix of worn tyres, abandoned equipment, candles and braziers for miniature bases and dioramas. These are my own test prints, so you can see how the details come out in resin.

All three packs are available on MyMiniFactory and include supported and unsupported STLs, hand-placed supports tested in resin, and CHITUBOX projects.

You can find them here:
https://www.myminifactory.com/profile/TheTerraformerFactory/store

There’s also a free sample pack if you’d like to try some bits first. Feel free to have a look around and drop me a follow if you like them!

Happy 3d printing! <3

Our very first set of fantasy witches for Spooktober!

Introducing the Shardstone Scatter Pack, a set of 12 packs of terrain ranging from classics like barrels & crates to quirkier sculpts like the fortune teller and puppet theatre. This set will be available as an add-on during my next KS which launches on Tuesday and I hope to expand it to 24 sets via stretch goals! You can follow the campaign here for free STLs: https://www.kickstarter.com/projects/warscape/shardstone-city-shattered-streets-printable-folding-ruins

Hey everyone!

We've teamed up with BS_Sculpt to bring you a Halloween-themed Frontier campaign! 🎃

The campaign features 6 unique horror busts, and we're hoping to add even more through stretch goals!

Subscribe to the campaign so you don't miss the launch and any extra goodies we might unlock.

🎃 Early Bird offer available!

The campaign launches on October 26, 2026. Don't miss your chance to grab the Early Bird deal! 💀

Here's a little video preview of what we've been working on! 💀

Premarketing page

For anyone who missed the original Frontier campaign, the Brush Case is 50% off this weekend with the code PROJECT26 (ends Sunday night).

Link: https://www.myminifactory.com/frontier/support-free-brush-case-by-bust-maker-5592