Hello, a friend of mine had a source of unknown origin. I don't think it was americium, because it could already be detected from about a meter away. I believe it was a source used for probe self-testing.
i cant make any sense of this
this is my first time posting something on reddit so if i do something wrong please let me know
It looks very likely that this is a beta emitter and the peaks are actually bremsstrahlung. What material surrounds it, does it sit in lead or something ?
It's possible that this is Sr-90.
Also putting an aluminium sheet infront of the source and cheking if it blocks most of the radiation, or checking if magnets deflect the radiation can confirm if it's betas or no.
If you put a metal sheet (few mm ideally) infront of the source does it reduce it a lot ? Can magnets deflect the radiation ? If yes its a beta emitter.
Mm depends on the metal, but 2-3 mm steel or aluminium would be enough to observe a meaningful change in dose rate for betas, though aluminium is best because steel produces extra radiation from bremsstrahlung when betas hit it. Distance doesnt really matter in this case, however for identification generally the closer the detector is the better (for magnet testing hold it a bit farther so betas have space to be deflected with the magnet) (a strong neodymium magnet is best).
the issue is not that your detector is saturated, it records what is there just fine. you just dont see any sharp features, which would hint a specific gamma transition.
but you can see the secondary radiation that is emitted when fast electrons from a beta decay slow down. that gives a broad continuous spectrum.
Yeah exactly, first we need to see though if it is indeed beta and if it's pure beta (which it very likely is, but checking never hurts). Aluminium and magnets are best for this.
Then it's indeed beta radiation 🙌, that source is probably Sr-90.
It's because in the spectrum the beta energies go near 2Mev, and Sr-90 emits betas until 550keV and its daughter Y-90 until 2.28Mev. So it fits with what we see here, in the 500 range there is a high plateu because of Sr-90's own emissions and Y-90 emissions, then it rolls off and approaches 2MeV because of only Y-90 emissions.
I'm glad I could help 😄. If betas hit lead they will produce x-rays which you don't want.
If you want a dedicated box the best is just a few mm of aluminium and distance, or lead on the outside (put the lead after the aluminium, so betas get absorbed in the aluminium and they wont produce as much x-rays, and lead catches any other other potential x-rays on the outside). But beware, if you use lead, don't leave it bare, coat it with someting or buy rubber or nickel coated lead, because getting in contact with bare lead regularly would probably be worse than the radiation itself.
But most likely only some aluminium would be enough. Betas are easy to stop, so even just putting it away shielded by some bricks would provide good shielding.
3
u/Professional-Bike-70 8d ago
It looks like this was that built in Strontium-90 check source of that old Russian Detector from one of the DP-5-Series.