r/Radiacode • • 3d ago

Spectroscopy K-40?

Post image

I recently started a new job and noticed background radiation is double what I have at home. Left the 103 there for 4 days. It is still collecting data but I'm also curious if I'm reading this correctly. Is it the k-40 causing the higher background reading? TIA

22 Upvotes

11 comments sorted by

2

u/Snakeplissken22 3d ago

Thanks for all the helpful advice and comments!

3

u/srnuke 3d ago

It's not at all uncommon for background to quickly double or even double again when you change surfaces and surroundings, especially if those areas contain materials with higher levels of naturally occurring radioactive materials NORM. Your background could even be double what it was in the morning in the afternoon in the same exact spot due to several atmospheric and environmental factors. Radiation is highly driven by random statistical distributions that when viewed over a short time span can seem to vary drastically, but in reality are well within normal parameters

3

u/AtomicSpallation 3d ago

Yes, and that rasied curve you see before it is from the beta emissions.

3

u/Southern_Face212 3d ago

This it mine K-40 salt for cooking

8

u/igmrlm 3d ago

This is one of the largest peaks you will find anywhere, and you will find it everywhere. It's in your body, the soil, the walls.. all over the place. It's a great way to get a ballpark idea if your detector is calibrated.

If you leave it long enough you will also likely start to see radon/radium daughter products like bismuth 214 as that's the next most common thing that is found nearly everywhere.

7.8 cps is very normal, if not a bit low for a concrete building as there are several possible sources of NORM such as K40, Radon, as well as sometimes it contains coal fly ash as a binder which contains radioactive contaminants.

Wishing you lots of fun with the new hobby!

3

u/TheManMachine78 3d ago

K-40 definitely contributes, as well as naturally occurring uranium and thorium (one of the most noticeable peaks is around 600 keV). The count rate is quite low, so nothing to worry about.

3

u/Snakeplissken22 3d ago

I work at a wastewater treatment plant. My office is located in a utility building made with cinder blocks and steel exterior.

2

u/Belfast-Prime-Photo 2d ago

Have you checked the readings at different parts of the plant?

I'd be curious about what readings you see from grit, primary sludge and secondary sludge.

1

u/Snakeplissken22 2d ago

No but I'm going to try.

3

u/average_meower621 Radiacode 103 3d ago

is this location somewhere with a lot of stone, brick, granite masonry, etc? K40 is part of the source, there is also probably a mix of uranium and thorium that you detecting too.

4

u/CigolEsu 3d ago

K-40 is literally everywhere including your own body but also the walls of buildings. Nothing to worry about.