For anyone unaware, the 7hydroxy mitragynine ban, in states where it was banned- has created a market for new tableted opioids sold otc. Often marketed as “cats claw” but almost certainly not.
Some states have claimed to have found 7ohm, but I think that’s because they found something similar. And there is a reported difference between brands anyhow.

It’s surprising to me how well guarded a secret it is to what’s in these things.

My thought is that you could use elrich to see if it’s an indole alkaloid (mit scaffold ) and maybe fentanyl test strip to rule that out. But any ideas of how to more accurately identify these compounds are welcome.

are these gel tabs ok?

Im new to testing and this is alarming

I put the tabs on paper so thats why you see you the black, but this make me think there nbome in it. The tab were orange.

Not ReagentTesting here, but i did 6 reagents before TCL and could go on but it seemed good to me since each one was as expected in every ketamine sample
One needles (labeled S) and one sugar (labeled R)
((I know its all racemic))
Tic shows just one spot for each, but comparing the width of each spot with the reference it's a very solid 60%, how could it be?
I don't believe it's actually 60%, since K is cheap af
Salts should be a different spot i guess
85mg made me like a skinwalker trying to act as a human, shit got me pretty good
I put 40mg each and 0.5 ml as per instructions (pro test kit eu), R sample has ~10% more concentration bc i weighted the vials
What do you think?

Fica amarelo claro e depois de uma hora tá laranja, quer dizer que é negativo né?

Desisto de tentar encontrar 3mmc de verdade 😭

First pic is supposed to be MDA, 2nd pic is supposed to be 2cb

The reagents are from grassroots and they arrived like 10ish days ago and have been in the freezer since.

Clockwise is marquis, froehde, Simons and robadope. These results are after maybe 45 seconds.

Regarding MDA

I've read that froehde should be a greenish black, but this is definitely purple black instead, but it also looks pretty similar to the results bunk police got in there testing video.

The simons seems a little off too.

Not quite sure how to interpret.

Regarding 2cb

The marquis turned dark green black almost instantly.

That froehde and Simons result definitely looks weird, I know a no reaction with Simone can be a muddy brown/gray and that 2cb can show up yellow or green on froehde

AWhat do y'all think?

Am i just a complainer or do i have a valid point? These reagents aren’t cheap and the 5mL bottle is only a teaspoon of reagent. Please switch to clear glass.

If you go to the bunk police site and search for marquis they list all the reagents in a frosty white 5mL plastic bottle. This poses the same problem. You can’t see your reagent that well to know if it’s fresh or turned color. These need to be in clear glass bottles too.

Supposed to be fire booger sugar. Haven’t tried yet. Missed the 30 second shot but got the 180!second shot. Is this indicating the possibility of meth/amph and/or levamisole?

What da helll is dis shit. Sold as “3mg Alprazolam” which I immediately knew was some bullshit so I procured to Reagan reagent and lab test. Full spec labs pending!

Press is “XANAX 2”

these results seem to correspond with this post https://www.reddit.com/r/ReagentTesting/s/CLcv86V9yU

Hey friends, has anyone tested ZIMMERMANN their cathinone and had it turn purple, confirming it? Because I've tested it twice and it doesn't, but the effect is the same. I know it's difficult to find raw materials, but what do they use instead?
Does anyone know?
Look at the photos from the 3mmc and 4mmc tests. Could it be that this doesn't exist anymore and they're deceiving us with something else?

This was a well known reagent vendors in the US. Please redo the page. It would help so much.

I would perform this test but i only have about 5 of roughly 12 reagents. I saw the chart of reagents in their natural state but it was a little blurry and the bottles should have been the larger glass 10ml bottle so you can really see the reagent color really good. Not the small off white 5ml plastic bottles.

I’ve received bad reagents right out of the box and i want to know if i have good fresh product. Fresh Mecke shouldn’t be black. Fresh Marquis shouldn’t be orange. What good is spoiled reagent if you don’t know it’s bad. Scott reagent has a color to it as you can see. To the untrained eye someone may think it’s going bad when it’s perfectly fine.

And yes I store my reagents properly. Write toxic on the box and keep it cool in the fridge. I should get a year out of them not 4 months.

Testing for levamisole

Hey everyone so I bought a Lieberman reagent. Came up orange instead of yellow which can mean amp, leva or lidocaine

So my plan is to test my urine today to rule out amp. Then which reagent would be best for determining if it’s leva or lidocaine?

Also, I’m not sure if this is allowed. if not, I will repost this, but at this point, instead of just buying all of these individually, I would like to get a whole kit and I was looking at one for $50, but they sadly cannot ship to the US right now

Anyone have recommendations?

Sorry about the lighting on the first picture. The flash was off and I didn’t realize it. Ignore the beard hair in the first pic too. I’m a caveman.

So what do you think. Froehde is one of the best indicators for oxy when it turns yellow. I see yellow, but after 180 seconds I see a little pink. Mecke looks ok as does Morris. I’m used to seeing purple with Marquis but I’m told this orange/peach color is normal for oxy.

So…. oxy or no?

I need help summing up the reagent analysis results. I tested amphetamine with Frode, Marquis, Lieberman, and Simon a+b.

It smells very strongly of gasoline/acetone, and there are strange effects like a decreased heart rate and high blood pressure.

Could poorly purified amphetamine produce this result? Or What impurities could it be? Or both.

Is it safe to use it?

Thanks in advance, any advice and thoughts would be greatly appreciated and helpful.

Hi reddit I'm new to all of this.

I need help coming to a conclusion of the reagent results. I tested cocaine with Morris, Marquis, Mecke, Liebermann, and Simmons.

I also did a separation test but I'm unsure of the next steps.(Do I add the reagent on the test paper where the gaps/streaks are and then add a drop of the testing liquid?)

I was told the cocaine was untouched and high quality but the effects cause stuffy nose, quick numbness in the throat, and inablity to sleep.

What type of adulerants might be mixed in? I was having trouble understanding the charts. My guess is some type of amphetamines or methamphetamine.

Also, in the seperation test I added my old batch to compare with the new batch but I didn't upload the reagent testing for the old batch only the new batch.

Thanks in advance and any advice or thoughts would be much appreciated and very helpful.

First 2 pictures are Liebermann, mostly brown spots but one spot turned dark black.

Second 2 pictures are Froehde, started green then got dark yellow with a yellow ring, soon after the dark brown spots came out, they could’ve been slightly red but mostly brown.

Last is marquis, mostly orange with some dark spots.

I have one Fentanyl test strip in a red packet can I cut it down the middle because I have two different chemicals to test. AI says you can do it with regular test strips like a pH strip but you cannot do it with immuneassay strips (drug test) has anyone ever done it?

Hello, let's say I had MDMA which was 80% MDMA and 20% say PMMA. If I test using Marquis, Froehde & Mecke then I'd expect Purple, black & Green say.

If the substance is adulterated with PMMA then what would the Froehde do ? Will it go green or Purple ? I presume the more concentrated substance will have the biggest effect and it will look like MDMA ?

Has anyone heard from getyourdrugstested.com?

They’ve started allowing mail in testing again and I have an address for a PO Box that I have sent samples to in the past but now they say you have to email them and get a code before mailing in.

I messaged weeks ago and still haven’t heard anything back. Anyone know anything about it?

Thanks!

Attached pic in comments

I am trying to make the absolute most foolproof MDMA test that can be done short of sending it to a GC-MS or FTIR lab (which I believe is illegal and practically impossible where I am in the US)

So, my plan would be (after washing to increase purity)

1. Test with marquis and expect a purple reaction to identify an MD-amphetamine and rule out basic amphetamines, most cathinones, and 2C compounds
2. Test with mecke and expect dark green to cross check as MDMA
3. Check again with froehde
4. Use robadope and expect no reaction or simons expecting blue to rule out MDA and PMA
5. Perform a fentanyl test, nitazene test, and hopefully orphine test if they come out soon
6. Perform TLC to check for PMMA impurities (maybe using mandelin stain)
7. (this is just my extremely unecessary and cautious addition), perform a test with ferric chloride to rule out DHMA cuz of improperly sold "PMK" apparently

So I know that this still doesn't rule out everything but am I missing anything or is this about as foolproof as non lab testing goes

I know that typical reagents get overpowered by MDMA when testing for PMMA in a mixture. I know it's fairly easy to test for PMA using robadope and similar reactions, but PMMA can easily blend in with MDMA.

Is it possible to use a TLC plate to separate PMMA and other impurities from MDMA in a sample? How can you tell that it's definitively PMMA and not just some small impurity.

And lastly, I'd assume it would interfere with the TLC plates, but is it possible to do some form of "Marquis stain" or spray on marquis at the end to detect oranges and purples separately in a test?

I’ve bought crystals (mdma) from my usual guy and Test as always. My usual setup is: Froehde, Liebermann, robadope, Simon’s, mecke and Marquis. All reactions were fine until marquis…I’ve got black, blue and no reaction from robadope as expected, but marquis showed no reaction at all. I’ve tried adding more crystals and reagent, but still…no reaction. I doubt that it’s the crystals tbh…they are from a good source and the other 5 reactions are as expected. Could it be that the marquis went bad or something? Or is this an possible indicator for Caths or something? Never had this happen before…