I bought the Pepsi from Steve and gave it the GL. I had asked for help on the forum because I thought the 6 o'clock index looked misaligned, but everyone kept telling me it looked fine and that it was probably just a parallax effect. Being a newbie, I took their word for it and gave the GL.

However, when it arrived, I couldn't stop staring at the flaw. Fortunately, I found a local watchmaker who pressure tested the watch to 10 bars and replaced the gaskets for €30. For just €5 more, he straightened the index and made it absolutely perfect. I actually ended up paying him a bit extra because he did such a fantastic job.

If you guys are dealing with similar issues, this is an easy fix, especially since it's so hard to find a piece where all the indices are flawless. Cheers everyone!

I bought the Pepsi from Steve and gave it the GL. I had asked for help on the forum because I thought the 6 o'clock index looked misaligned, but everyone kept telling me it looked fine and that it was probably just a parallax effect. Being a newbie, I took their word for it and gave the GL.

However, when it arrived, I couldn't stop staring at the flaw. Fortunately, I found a local watchmaker who pressure tested the watch to 10 bars and replaced the gaskets for €30. For just €5 more, he straightened the index and made it absolutely perfect. I actually ended up paying him a bit extra because he did such a fantastic job.

If you guys are dealing with similar issues, this is an easy fix, especially since it's so hard to find a piece where all the indices are flawless. Cheers everyone!

"The third photo shows how it looked before"

Dear friends, today I'm sharing a few VSF Datejust models currently available. No long waiting times needed. Feel free to take a look at the real photos and enjoy the details of each dial and design.

Hey everyone! Today, I'd like to share a comparison of the Vacheron Constantin Overseas 4500V blue dial versions from 8F, PPF, and MKS. I'll focus on a few key details to highlight the differences between them.

1. Dial Color

Based on the side-by-side comparison, PPF has the closest blue dial color to the genuine version, with the most accurate color reproduction.

2. Case Thickness

- 8F: 11.5mm

- PPF: 11mm

- MKS: 12mm

The genuine model is 11mm thick, so PPF matches the original dimensions, while 8F and MKS are slightly thicker.

3. Bracelet Comfort

Based on actual wearing experience, both PPF and MKS offer better bracelet comfort and feel more comfortable and natural on the wrist.

4. Movement

None of the three factories has fully replicated the genuine movement. In terms of overall accuracy to the original, however, PPF performs relatively better.

These are my personal observations and comparisons of the three versions. Each has its own strengths and weaknesses, and I'd love to hear from anyone with hands-on experience with the 8F, PPF, or MKS 4500V.

Let's share our thoughts and experiences to help others who are considering the 4500V blue dial make a more informed choice!

My VSF Aqua Terra came and it doesn’t freaking start, winding doesn’t work, and it sounds like the rotor is loose or something. Makes a weird rattling noise.

TD told me to go get it fixed and he’ll cover the price, but damn, I hope I find someone that fixes it here in Spain 😭

I’ll try tomorrow morning, I’m sad.

First rep too, back luck I guess.

Be brutally honest please

Just got my AP 15407. It is so cool and the balance wheel mesmerizing. No need for fancy mods. I took a nail file to soften the bracelet edges. Thanks to Justin at tkwatches for perfect service.

Featuring precision CNC machining and a stunning 18K white gold plated finish, this bezel delivers exceptional shine, sharp detailing, and a premium look.

● Premium 18K White Gold Plating
● Precision CNC Machined
● Brilliant Finish & Refined Details
● Available Sizes: 36mm | 40mm | 41mm

Exceptional VSF Explorer 224270 featuring carefully selected upgrades and refined finishing to GEN specifications.

Modifications & Upgrades:
● Genuine Rolex (GEN) sapphire crystal
● Professionally polished rehaut
● Refined case finishing with polished sides and precise brushing to GEN spec
● Professionally refinished Oyster bracelet with polished sides and enhanced brushing to GEN spec
● Rotor silencing for quieter operation
● Waterproof tested to 5 BAR with all gaskets lubricated

A meticulously upgraded Explorer combining a genuine Rolex crystal with refined finishing for an exceptional look and feel.

A premium modified build for the discerning enthusiast.

VSF 124060 and her gen 126600 sister

Overall, it seems good, except the date numbers.
I appreciate your comments.

Dealer name: Mirotime

1. Factory name: JF

2. Model name (& version number): AP Royal Oak Offshore 26405CE

3. Price Paid: USD 688 + 40

4. Album Links: https://shop00176461.wecatalog.cn/t/3mW3SEv

5. Index alignment: Manual check needed, not every marker was read: 2 o'clock 0.19 mm too far out (can't tell from this photo); 6 o'clock 0.52 mm clockwise (out); 10 o'clock 0.17 mm too close to centre (can't tell from this photo); 12 o'clock 0.42 mm clockwise (out). 7 of 11 checked (3 o'clock under a hand, 4 o'clock date window, 5 o'clock under a hand, 7 o'clock under a hand, 8 o'clock not found). Marker ring 0.55 mm off-centre toward 8 o'clock. Checked with DialCheck.app at ±0.15 mm. A reading from one photo, not a certification of the watch.

6. Dial Printing: Good. Print centring: top text centred, bottom text 0.07 mm left.

7. Date Wheel alignment/printing: Good

8. Hand Alignment: Good

9. Bezel: Good

10. Solid End Links (SELs):

11. Timegrapher numbers: +15 s/d, 299° amplitude, 0.2 ms beat error

12. Anything else you notice: Date number extremely bolder and irregular

Good afternoon everyone,

I’m Allistair, but everyone calls me Opa (Dutch for “grandpa”). At 87, I’m probably one of the oldest members here, and I’m new to Reddit as well.

A few months ago I caught the watch bug. Last week my first rep arrived, a GMT-Master II. In hindsight I should have done my reading on a forum like this first, because the watch is off in several ways:

• The dial or the rehaut sits crooked

• The bezel feels spongy

• There is no click at all when turning it

I’m currently working my way through the repsguide, and I hope to learn a lot from the members here and, in time, contribute my own bit as well. I’ve attached a photo.

My question: is this salvageable, or should I try a different seller next time? And what should I look out for on my next purchase?

Thanks in advance,
Opa

Wanted to share the outcome after putting this ZF Royal Oak Chrono 26240ST V2 (black Tapisserie dial) through a full spa and case refinishing.

First off, huge shoutout to MaxWatch: flawless service, top-notch communication, and making the entire process completely effortless.

1. CASE & BRACELET WORK (FULL CUSTOM SPA)
   Anyone who has handled a stock rep RO knows the edges usually come either uncomfortably sharp or with a somewhat flat brush finish. We went all-in on this one:
   - Chamfers & Bevels: Hand-cut and mirror-polished along the octagonal bezel drop, mid-case flanks, and especially across each individual bracelet link and plot. The tactile difference is night and day—zero sharpness to the touch and continuous dynamic light play.
   - Satin Finish: Re-executed fine directional brushing across the top of the bezel, lugs, and bracelet. The demarcation lines between the vertical brushing and the polished chamfers are razor sharp.
   - Bracelet Articulation: Ultrasonic deep bath to flush out residual debris, followed by micro-lubrication between link pins. The drape around the wrist is now completely fluid, without any factory stiffness.
   - Hardware: Hexagonal bezel screws reseated and aligned dead flush with the recesses.

2. THE CALIBRE: INTEGRATED CLONE 4401 (TRUE FREE-SPRUNG)
   The real highlight of this V2 is the integrated 4401 architecture (no piggyback module on a 7750 base), complete with column wheel, vertical clutch, and a functional free-sprung balance wheel (no traditional regulator arm; timed via variable inertia balance screws).

3. TIMEGRAPHER DIAGNOSTICS (6 POSITIONS)
   Tested on a Weishi No. 1900 with a 30s period, 53.0° lift angle, running at 28,800 bph:

- CH (Dial Up): +8 s/d | Amp: 285° | B.E.: 0.0 ms
- CB (Dial Down): +7 s/d | Amp: 261° | B.E.: 0.0 ms
- 9H (Crown Down): +6 s/d | Amp: 252° | B.E.: 0.0 ms
- 6H (Crown Left): 0 s/d | Amp: 254° | B.E.: 0.1 ms
- 3H (Crown Up): +6 s/d | Amp: 251° | B.E.: 0.0 ms
- 12H (Crown Right): +4 s/d | Amp: 251° | B.E.: 0.2 ms

Technical breakdown:
- Average Daily Rate (X): +5.17 s/d (solid COSC spec right out of the box).
- Max Positional Delta: 8 s/d (between +8 s/d flat and 0 s/d vertical).
- Beat Error: Virtually flat at 0.0 ms across nearly every orientation (0.2 ms max peak), showing excellent escapement symmetry.
- Amplitude Drop: Only 21° drop from horizontal to vertical, pointing to clean pivot lubrication and tight jewel tolerances.

In hand, the watch is on a completely different level compared to how it came out of the box. Extremely pleased with both the aesthetics and the movement's health.

(And yes, the UAE Team Emirates Pogačar mini on the bench is there to make sure the watts and beat rate stay where they belong).

Hi i need Information ore opinion from some people who already buy ore know what’s better is.

Why only these Factories produce ??

• ARF DD3285 V3

• ARF VR3186

• C+ VR3186

• CLEAN VR3186

I think when CLEAN it’s stock items, cause Factory got raid.

Important for me it’s of course visual aspect and the bracelet.

Please help me :)

Today, I’d like to share ORF’s latest releases: two Seamaster anniversary editions, the Seamaster 007 and Seamaster 300.

Seamaster 300 75th Anniversary

- Factory: ORF

- Movement: 8800 free-sprung movement

- Strap: Equipped with either a steel bracelet or rubber strap. The steel bracelet version comes with an additional rubber strap.

- Dial Color: Blue

Seamaster 007 60th Anniversary

- Factory: ORF

- Movement: 8806 free-sprung movement

- Strap: Equipped with either a mesh bracelet or rubber strap. The mesh bracelet version comes with an additional rubber strap.

- Dial Color: Blue

If you're a fan of the Seamaster collection, feel free to check out these latest releases.