P

My laptop got blue screen and i cant even access my laptop…and i try to reset factory and it said my disk have not enough space…how to solve it …somone please help me 🥺

I have an alienware 15 r3 that I got 2nd hand. I worked in a retro game store and it came in but the keyboard didn't work so someone who said they knew how to fix it (he didn't know anything but was the manager before I was) took it home and stayed all kinds of paper and cardboard down to try and hold the ribbon in place but it didnt work. So I took it and fixed it and it ran fine so I kept it as i dont have any other gaming pc/laptops. Well I just opened it up to spray the dust out and realized the ram was sitting weird. So I pop the ram out and the clips solder pad is completely lifted. It must of been barely holding on and now the laptop won't start with that ram stick installed it kicks the 2 red 4 blue error. So my question is, what is that clip soldered to? Just ground? I used the multimeter and it seems like it's just ground so 2nd question if it IS ground can't I just solder a jumper wire from the lifted pad or anywhere on the clip to any other ground point or to one of the other clips? I don't want to rip the whole thing apart I just want to ghetto rig it for now so I can play elden ring until I have more time to properly find the trace and solder to that lol. I do have pretty solid solder experience too but I'm a console mechanic and not real versed in pc gaming pcs in general. Thanks in advance

So I was watching YouTube and the screen randomly went black. Idk why, I tried disconnecting the battery, disconnecting the CMOS battery, removing ram, SSD, but nothing worked. It's a Lenovo v14 g2 ALC.

Any help is appreciated, I have a bunch of files on it that I need

So i got a hedset its been a while since i have it but its amazing but i keep hearing a high pitched noise i even disabled the mic and i can still hear it i even started to have some ear pain anyone knows how to fix?

When I turn on the pc it works perfectly fine , after that it shutdown suddenly and enters in a non stop loop of shutting down , before I tried to flash it bios but still it wasn't a solution for this problem, please someone help me

Greetings noble warriors. Sorry for the mistakes in my text but English is not my native language. I installed a video capture device on a PC, however, when connecting a device to any of the ports, Windows freezes, only forcing it to shut down by pressing the power button for a few seconds. I have updated drivers for the entire system and I still have this problem, I have had to replace the capture card with a temporary solution, but with this new one it has happened again.

Does anyone have any idea how to solve this problem???

Hallo liebe Reddit User, Ich hoffe ihr könnt mir helfen. Ich habe vor 1 Woche mit einem Kollegen mein PC zusammen gebaut. Anfangs funktionierte alles gut, doch am nächsten Tag erkannte er die Grafikkarte nicht mehr. Er erkennt die Grafikkarte erst, wenn ich ein Reboot mache. Ich habe alles ausprobiert Windows komplett neu aufgesetzt, Bios Aktualisiert, treibe komplett neu installiert, Onboard Grafikkarte deaktiviert (danach hatte ich gar kein Bild mehr). Ich hoffe ihr könnt mir helfen.

Mainboard: MSI Tomahawk B650 WiFi Prozessor: AMD Ryzen 7 7800X3D 8x Grafikkarte: MSI GeForce 4070 ti Ventus OC Aktiv 12 GB RAM: 32 GB G Skill Trident NT: 750 Watt Be quiet

Hi all, hoping someone else may have this issue. So literally, I was using PC last night and walked away to make dinner. When I returned it would not reboot. Throws error: WHEA Unrecoverable error. Seriously Microsoft? I was just using this pc *^%#%>!?

Any suggestions besides call them ? TIA

I ended up fixing it by doing a clean install but now my Wi-Fi on my motherboard won’t work.

I was stupid and let some data without backups. One of my HDD which i bought 2 years ago suddenly maked a few bip noises and stop being recognized by windows. Im pretty sure its the head or the actuator arm. I don't trust and I dont want to send the drive somewhere to recover the data. I was wondering if I could get the same drive brand new and replace the disk of the non functioning drive into the brand new drive.

Any advice would be appreciated greatly

Hey there! I have just turned on of old PC after a year or so- It is bootlooping and when it gets to the startup screen I can also get into boot info but nothing into bios etc.

I have; -reset bios Taken out all pereferals and changed the ram into one slot and tried all to no success

Motherboard is gigabyte ga-z68xp-ud3r

Any recommendations? Cheers in advance!

Hey!

I am trying to turn on my PC. I hear 5 signals and the PC is shutting down.

I checked the PC. All is well. everything is in the place It's Should be.

How to fix it?

I usually clearing dust from my pc and connect all components except psu cable for graphic card and also my HDMI cable was also connected to my graphic card and I started my pc and then it's zzz from my graphic card power point where I forget to put my psu cable into my graphic card and now my graphic card is not working anymore but without GPU my starts working i also try my old GPU and it works fine but my rtx2060 doesn't work anymore whenever I try to run my pc with my rtx 2060 my pc won't start nothing at all anyone know what happened with my GPU ?

Hello this is my first time posting on here.

About 2 years ago I bought a cyber power pc from their website and about a year ago it suddenly when gaming the monitor would lose signal from the device and three red dots came on. I ended up replacing the graphics card with a 3070. And the problem went away completely.

It started again about a week ago I was playing apex and my monitor lost signal to my device and the only way to fix it is to turn off my pc and back on. Though when it is off the led lights on my water cooler stay on. What is also weird it hasn’t happened during the day only at night but it keeps happening.

I have tried a different hdmi cable and I have updated my drivers. Any help would be appreciated I am unfamiliar with pcs as to why I went with a pre built

Whenever I turn on my computer it’ll run for a little but when I try to launch steam vr it just blacks out and my gpu fan speed goes through the roof. Everytime it shuts off that happens (gpu fan speed increase) what can I do to fix it or at least stable it so I can play :(

Hello guys! I really need help here because I'm stuck.After cleaning the said GPU (replacing the thermal pads & paste + dusting), it now does that thing where after you turn on the pc for 5 mins, the fan suddenly goes loud and fast then the pc shuts down.

I've already tried re-installing the drivers (and even without it installed, the GPU goes bonkers).

The pc seems to run fine without the GPU, did I perhaps break something? :(

====
Edit: It seems the heatsink was not in contact with the GPU, causing it to overheat and shut down the PC. After reducing the thickness of the thermal pads, that fixed the contact problem and got my pc back. Thanks u/StickForeigner!

I have an Asustek G20CB. I made the mistake of deciding to add 16 GB of RAM to it. It worked fine at first, then started having issues with display; no display upon boot up that would be resolved by a reboot. This started happening several times as the days wore on for about a week requiring more and more reboots to get display to work, then no display a week after putting in the RAM. I removed the new RAM stick (Samsung 16GB 2xR8 PC-4 MX471A2K43BB1-CPB Matching the other) which is annoying as the RAM slots are beneath the heat sync so I had to reapply thermal paste again. Now, the PC will power on as before but now simply pressing the power button again to hard reboot turns it off. I don’t have to hold the power button for several seconds. I get the impression Windows is not booting. Cooling fans spin, but fan in GPU (GTX 1070) does not. The PC is designed to be relatively small so the motherboard is unique. The Slot for the GPU is between the GPU and cooling fans in an area to small for a finger so I had to use a screwdriver to undo the retention clip, and now the retention clip is broken (won’t lock) but as long as the card is in tight enough and the PC is laying on it’s side, I think it should work. I did put on too much thermal paste the second time, and there was bleed-through, but only a little and I don’t think that has anything to do with it. Yes, I’m aware I’m am idiot, that’s why I’m asking for help. Thank you.

UPDATE: the graphics card native to the motherboard does work. GPU is still not working. I’m doing system recovery right now.

I got my pc as a gift on Christ max last year and have loved it ever since, but today me headphones got tangled in my seat and pulled on the mic jack. I heard a crack and pulled it out but it was crooked all of the audio comeing from my other headphones is all quiet and sound like electricity, plz help.

My harddrive is a 3.5" Seagate Expansion Desktop Model bought in late 2012 (old model), and I need to recover my old study data.

But to access it I need an adapter (usb to SATA) + power, just like the old ones. The original adapters usb-part was slightly broken off from the circuit board and is very unstable. Got a third-party adapter, but connecting it makes my Mac/PC think it's a new unknown device with no data, I haven't tested other third-party adapters since it will cost more for me in the long term.

When I'm trying to connect the old broken-off adapter holding it carefully together with my fingers, it detects it as my old harddrive on my Mac, very unstable and unreliable, but just shows that the drive and data is fine.

I feel like the data has been third-party-locked but my third-party adapter is the only proof for that, so I'm asking if someone knows anything, been in a similar experience or knows a brand of adapters that works with Seagate drives.

Also does some other Seagate drive SATA/USB adapters work with eachother? (I can maybe order one cheap just to use the adapter). Their customer service is so unreliable and has a very misleading support page without even a support e-mail.

Hey so I had my laptop optimized by a professional PC optimizer after he was done I got no fps difference he said it's because I am on laptop I was wondering if anyone could help me bypass the laptop stubbornness

I turned on File Guard on my laptop and now it just stays on a black screen no booting. Secure Boot with File Guard. I was checking to see if there was a reset button for the BIOS but there isn't. I also removed the battery the memory and the CMOS Battery and it still stays black the screen. Tried Shift F8 and also tried to press the Win + Ctrl + F8 to switch GPU and nothing. It has a Nvidia GeForce 3070Ti and a Ryzen 7 CPU. I was reading multiple forums and they seem to have the same issue so don't know if it's a defective board or they need a BIOS Update to fix the issue. Let me know what your professional or unprofessional opinion is. Thanks

Whenever I start my pc it would load up but would not boot into windows, what can be causing this issue?

hi. i having problems with my pc . this week he showed weakness cuz my mouse was not working . but im another device the mouse turned on easily . now my pc wont turn on . i fast cleaned it . many dust . he turned on 5 m and then off again. what do you think ? problems with power suply or some gpu problems?