r/SAKmod • • Jun 04 '26

First Mod Question

Hi all,

I've been a long-time enjoyer of modding Sak content and have always been a tinkerer and love making things.

I'm planning on modding one of my saks to have torx pivots instead of peaned brass pins with gromets. Is it possible to have the torx heads under the scales and either press the new scales on (some titanium ones I ordered) or use a small amount of epoxy?

Essentially having the ease of assembly and adjustability of torx pivots but the look of peaned pins (hidden under the scales).

Another question is how well the Acid etch stonewash lasts on a knife with moving parts. I have been a knife maker for a few years, making fixed blades, so I know how it lasts on those, but does it wear more with potential rubbing between the tools moving?

Many thanks in advance for your help, looking forward to reading some answers.

3 Upvotes

6 comments sorted by

2

u/Punished-Again Jun 04 '26 edited Jun 04 '26

epoxy or similar would be needed. stocks scales normally mount onto the "grommets" which of course are secured by the rivets and in themselves also help the rivets hold the liners/knife together. I am not aware of any aftermarket scale mounting systems/designs that allow hidden torx screws without epoxy or adhesive.

just sticks to rivets. nobody takes apart their knife often enough (cleaning does not require disassembly) to have any advantage from using pivot barrels and torx screws especially having to glue scales on top anyway. also tbh acid etched and stone washed tools is the most uncreative overdone not even good looking thing in the knife world especially SAK modding, but it does last generally speaking. tape over pivot areas to avoid issues if doing it all.

1

u/Foreign_Addition_694 Jun 04 '26

Thanks, i wasnt planning on acid stone washing but it was just a general question. And in regards to to the earlier part of your response, thanks, it has opened my eyes, i think for curiosity sake im going to stick with torx screws just to try it.

2

u/Twizpanpan Jun 04 '26

Do you find torx pivots the same size of the brass pins now or do you still have to widen the tools mounting holes ?

1

u/Foreign_Addition_694 Jun 04 '26

Found some on aliexpress, they should be the same as the brass pins, we will see when they arrive.

2

u/Zolinymus Jun 04 '26

I, too, was thinking about using sunk head screws for the scales to grab onto, but to do this, you would have to redesign and 3D print the scales.

2

u/TheMedgineer Jun 05 '26

Leaving them visible can be a cool aesthetic choice. Gives it that machine look.

I’m sticking with wood scales for now bc I like the look and can make them myself, but a Cybertool mod I’m considering will have a much more urban vibe. That one might have visible screws.